Radar front-end design for human vital sign detection for triggering purposes of medical devices

In this paper we present the design, implementation and characterization of a radar front-end module for the detection of human vital signs. It utilizes a constant wave (CW) concept and can operate with a programmable 868-870 MHz carrier frequency in the industrial, scientific and medical (ISM) radio band of the short range devices in Europe. The printed circuit board integrates connectors for interfacing of the receive (RX) and transmit (TX) antennas and the in- and quadrature-phase outputs of the I/Q demodulator for further digital signal processing. A direct-conversion and a quadrature operation mode are possible. In direct-conversion mode the vital signs are easily detectable from the modulated common mode voltage.

[1]  Ke Wu,et al.  Monitoring vital signs using remote harmonic radar concept , 2011, 2011 41st European Microwave Conference.

[2]  Lin Li,et al.  Integrated radar systems for precision monitoring of heartbeat and respiratory status , 2009, 2009 Asia Pacific Microwave Conference.

[3]  Jenshan Lin,et al.  Range correlation and I/Q performance benefits in single-chip silicon Doppler radars for noncontact cardiopulmonary monitoring , 2004, IEEE Transactions on Microwave Theory and Techniques.

[4]  Jenshan Lin,et al.  Frequency-tuning technique for remote detection of heartbeat and respiration using low-power double-sideband transmission in the ka-band , 2006, IEEE Transactions on Microwave Theory and Techniques.

[5]  D. Plettemeier,et al.  Antenna design for heartbeat detection for triggering purposes of medical devices , 2013, 2013 International Workshop on Antenna Technology (iWAT).