Processing, properties and applications of highly porous geopolymers: A review

Abstract Geopolymers, possessing a semi-crystalline three-dimensional inorganic network generated by the dissolution and reaction of a solid alumino-silicate source with an activating solution, have attracted increasing attention from both academia and industry because of their unique and favorable characteristics. This review deals with the synthesis, characterization and potential applications of porous geopolymers, realized through different processing routes. Firstly, the processing approaches are divided into five categories: (i) Direct foaming, (ii) Replica method, (iii) Sacrificial filler method, (iv) Additive manufacturing, and (v) Other methods. Their microstructure, porosity and properties are compared and discussed in relation also to the different processing routes. This review highlights the fact that porous geopolymers are promising low-cost candidates for technologically significant applications such as catalyst supports or membranes, filtration of liquid or gases, adsorption and insulation. This review aims at summarizing the main published results and fostering further investigations into developing innovative ways to generate components with improved properties.

[1]  Zhen Li,et al.  Novel thermal insulating and lightweight composites from metakaolin geopolymer and polystyrene particles , 2017 .

[2]  Jian He,et al.  Synthesis and characterization of red mud and rice husk ash-based geopolymer composites , 2013 .

[3]  D. Hasselman,et al.  Effect of Small Fraction of Spherical Porosity on Elastic Moduli of Glass , 1963 .

[4]  Xudong Cheng,et al.  Development of porous fly ash-based geopolymer with low thermal conductivity , 2015 .

[5]  L. Petrik,et al.  New synthesis method for the production of coal fly ash-based foamed geopolymers , 2015 .

[6]  M. Romagnoli,et al.  Interactive powder mixture concept for the preparation of geopolymers with fine porosity , 2016 .

[7]  M. Fukushima,et al.  Macro-porous ceramics: processing and properties , 2012 .

[8]  Eugene Ryshkewitch,et al.  Compression Strength of Porous Sintered Alumina and Zirconia , 1953 .

[9]  D. Caputo,et al.  Hybrid geopolymeric foams with diatomite addition: Effect on chemico-physical properties , 2017 .

[10]  A. Bădănoiu,et al.  Preparation and characterization of foamed geopolymers from waste glass and red mud , 2015 .

[11]  J. Labrincha,et al.  Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters. , 2016, Journal of hazardous materials.

[12]  M. Cyr,et al.  Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete , 2017 .

[13]  T. Cheng,et al.  The heavy metal adsorption characteristics on metakaolin-based geopolymer , 2012 .

[14]  Maria Chiara Bignozzi,et al.  A comparison between different foaming methods for the synthesis of light weight geopolymers , 2014 .

[15]  P. Palmero,et al.  Geopolymer technology for application-oriented dense and lightened materials. Elaboration and characterization , 2015 .

[16]  David S. Smith,et al.  Potassium geopolymer foams made with silica fume pore forming agent for thermal insulation , 2013, Journal of Porous Materials.

[17]  P. Colombo,et al.  Effect of process parameters on the physical properties of porous geopolymers obtained by gelcasting , 2014 .

[18]  P. Colombo,et al.  High strength metakaolin-based geopolymer foams with variable macroporous structure , 2016 .

[19]  K. Sopian,et al.  Development of green geopolymer using agricultural and industrialwaste materials with high water absorbency , 2017 .

[20]  Laura Ricciotti,et al.  Lightweight geopolymer-based hybrid materials , 2017 .

[21]  Dimitrios Panias,et al.  Thermal insulating foamy geopolymers from perlite , 2010 .

[22]  G. Mucsi,et al.  Effect of Grinding Fineness of Fly Ash on the Properties of Geopolymer Foam , 2017 .

[23]  Hao Wang,et al.  Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence , 2014 .

[24]  Angelo Vaccari,et al.  Porosity and insulating properties of silica-fume based foams , 2016 .

[25]  P. Michaud,et al.  Silica fume as porogent agent in geo-materials at low temperature , 2010 .

[26]  Emmanuel Joussein,et al.  In situ inorganic foams prepared from various clays at low temperature , 2011 .

[27]  D. Bajare,et al.  Impact of reactive SiO2/Al2O3 ratio in precursor on durability of porous alkali activated materials , 2017 .

[28]  Yuan Yuan,et al.  Preparation of geopolymer-based inorganic membrane for removing Ni(2+) from wastewater. , 2015, Journal of hazardous materials.

[29]  J. Labrincha,et al.  Porous biomass fly ash-based geopolymers with tailored thermal conductivity , 2016 .

[30]  Fernando Pacheco-Torgal,et al.  Alkali-activated binders: A review: Part 1. Historical background, terminology, reaction mechanisms and hydration products , 2008 .

[31]  Paolo Colombo,et al.  Geopolymer foams by gelcasting , 2014 .

[32]  K. Ramamurthy,et al.  Influence of production on the strength, density and water absorption of aerated geopolymer paste and mortar using Class F fly ash , 2017 .

[33]  David S. Smith,et al.  Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements , 2012 .

[34]  K. Ramamurthy,et al.  A classification of studies on properties of foam concrete , 2009 .

[35]  Yan He,et al.  Preparation and characterization of porous metakaolin-based inorganic polymer spheres as an adsorbent , 2015 .

[36]  Yan He,et al.  Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: synthesis and evaluation. , 2015, Journal of hazardous materials.

[37]  F. Pennec,et al.  Thermal conductivity of porous materials , 2013 .

[38]  R. Cloots,et al.  Synthesis and characterization of new inorganic polymeric composites based on kaolin or white clay and on ground-granulated blast furnace slag , 2003 .

[39]  J. Davidovits.  Geopolymers and geopolymeric materials , 1989 .

[40]  G. Ye,et al.  The pore structure and permeability of alkali activated fly ash , 2013 .

[41]  J. García,et al.  Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates , 2010 .

[42]  A. Nazari,et al.  Physical and mechanical properties of lightweight aerated geopolymer , 2015 .

[43]  Ruifeng Li,et al.  Characterization of multi-scale porous structure of fly ash/phosphate geopolymer hollow sphere structures: from submillimeter to nano-scale. , 2015, Micron.

[44]  V. Medri,et al.  Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicates , 2013 .

[45]  N. Kang,et al.  Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography , 2014 .

[46]  Kiyoshi Okada,et al.  Water retention properties of porous geopolymers for use in cooling applications , 2009 .

[47]  Muhammad Naveed,et al.  Synthesis & characterization of natural soil based inorganic polymer foam for thermal insulations , 2017 .

[48]  Jong-Shin Huang,et al.  Inorganic polymeric foam as a sound absorbing and insulating material , 2014 .

[49]  Dongmin Wang,et al.  Effect of SiO2/Na2O mole ratio on the properties of foam geopolymers fabricated from circulating fluidized bed fly ash , 2014, International Journal of Minerals, Metallurgy, and Materials.

[50]  P. Michaud,et al.  Structural characterization of geomaterial foams — Thermal behavior , 2011 .

[51]  Dongmin Wang,et al.  Fabrication and properties of foam geopolymer using circulating fluidized bed combustion fly ash , 2014, International Journal of Minerals, Metallurgy, and Materials.

[52]  Dongmin Wang,et al.  Strength and thermal behavior of low weight foam geopolymer using circulating fluidized bed combustion fly ash , 2015 .

[53]  S. Rossignol,et al.  Use of silicon carbide sludge to form porous alkali-activated materials for insulating application , 2015 .

[54]  F. Pennec,et al.  Analytical and numerical identification of the skeleton thermal conductivity of a geopolymer foam using a multi-scale analysis , 2014 .

[55]  Waltraud M. Kriven,et al.  Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites , 2012 .

[56]  A. Gualtieri,et al.  Preparation of phosphoric acid-based geopolymer foams using limestone as pore forming agent – Thermal properties by in situ XRPD and Rietveld refinements , 2015 .

[57]  H. Esmaily,et al.  Non-autoclaved high strength cellular concrete from alkali activated slag , 2012 .

[58]  S. Rossignol,et al.  Analytical estimation of skeleton thermal conductivity of a geopolymer foam from thermal conductivity measurements , 2015 .

[59]  José Aguiar,et al.  Red mud-based geopolymers with tailored alkali diffusion properties and pH buffering ability , 2017 .

[60]  X. Cui,et al.  Recent developments on inorganic polymers synthesis and applications , 2016 .

[61]  V. Ducman,et al.  The use of different by-products in the production of lightweight alkali activated building materials , 2017 .

[62]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[63]  Paolo Colombo,et al.  Direct ink writing of geopolymeric inks , 2017 .

[64]  Ruifeng Li,et al.  Interface microstructure and compressive behavior of fly ash/phosphate geopolymer hollow sphere structures , 2015 .

[65]  J. Labrincha,et al.  Novel porous fly ash-containing geopolymers for pH buffering applications , 2016 .

[66]  F. Pacheco-Torgal,et al.  Mix design, properties and cost analysis of fly ash-based geopolymer foam , 2015 .

[67]  K. Hristovski,et al.  Iron oxide-modified nanoporous geopolymers for arsenic removal from ground water , 2015, Resource-Efficient Technologies.

[68]  Hao Wang,et al.  Geopolymer foam concrete: An emerging material for sustainable construction , 2014 .

[69]  Glykeria Kakali,et al.  Dissolution of aluminosilicate minerals and by-products in alkaline media , 2007 .

[70]  Kostas Komnitsas,et al.  Geopolymerisation: A review and prospects for the minerals industry , 2007 .

[71]  D. Seo,et al.  Geopolymer with Hierarchically Meso-/Macroporous Structures from Reactive Emulsion Templating , 2014 .

[72]  P. Colombo,et al.  Open-cell phosphate-based geopolymer foams by frothing , 2017 .

[73]  Antonio Licciulli,et al.  Intumescence behaviour of bottom ash based geopolymer mortar through microwave irradiation – As affected by alkali activation , 2016 .

[74]  R. Rice.  Comparison of physical property-porosity behaviour with minimum solid area models , 1996, Journal of Materials Science.

[75]  Zhihua Yang,et al.  3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide , 2017 .

[76]  W. Świȩszkowski,et al.  Synthesis of porous hierarchical geopolymer monoliths by ice-templating , 2015 .

[77]  A. Poulesquen,et al.  Solidification/stabilisation of liquid oil waste in metakaolin-based geopolymer , 2015 .

[78]  J. Labrincha,et al.  Porous geopolymer spheres as novel pH buffering materials , 2017 .

[79]  Hao Wang,et al.  Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete , 2015 .

[80]  Chunjie Yan,et al.  A facile method for preparation of floatable and permeable fly ash-based geopolymer block , 2016 .

[81]  Dean‐Mo Liu.  Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic , 1997 .

[82]  H. Martin,et al.  Morphological Characterization of Ceramic Sponges for Applications in Chemical Engineering , 2009 .

[83]  W. Rickard,et al.  Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions , 2013 .

[84]  P. Palmero,et al.  Environmentally-Friendly Dense and Porous Geopolymers Using Fly Ash and Rice Husk Ash as Raw Materials , 2016, Materials.

[85]  Emmanuel Joussein,et al.  Durability of inorganic foam in solution: The role of alkali elements in the geopolymer network , 2012 .

[86]  J. Sanjayan,et al.  Method of formulating geopolymer for 3D printing for construction applications , 2016 .

[87]  A. Wagh.  Chemically Bonded Phosphate Ceramics‐A Novel Class of Geopolymers , 2012 .

[88]  Petr Hlaváček,et al.  Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties , 2015 .

[89]  M. Cyr,et al.  Properties of inorganic polymer (geopolymer) mortars made of glass cullet , 2012, Journal of Materials Science.

[90]  P. Colombo,et al.  High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant , 2017 .

[91]  P. Aungkavattana,et al.  Effect of cordierite addition on compressive strength and thermal stability of metakaolin based geopolymer , 2016 .

[92]  J. Labrincha,et al.  Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers , 2016 .

[93]  Bhupinder Singh,et al.  Geopolymer concrete: A review of some recent developments , 2015 .

[94]  Joseph Absi,et al.  Porosity control of cold consolidated geomaterial foam: Temperature effect , 2012 .

[95]  Waltraud M. Kriven,et al.  Highly Porous Geopolymers Through Templating and Surface Interactions , 2015 .

[96]  J. Deventer,et al.  Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results , 2005 .

[97]  S. Lorente,et al.  Experimental investigation of gas diffusion through monomodal materials. Application to geopolymers and Vycor® glasses , 2014 .

[98]  Laura Ricciotti,et al.  TiO2-Based Photocatalytic Geopolymers for Nitric Oxide Degradation , 2016, Materials.

[99]  K. MacKenzie,et al.  Porous aluminosilicate inorganic polymers (geopolymers): a new class of environmentally benign heterogeneous solid acid catalysts , 2016 .

[100]  A. Allahverdi,et al.  Performance evaluation of foaming agents in cellular concrete based on foamed alkali-activated slag , 2017 .

[101]  Jong-Shin Huang,et al.  Production and properties of foamed reservoir sludge inorganic polymers , 2013 .

[102]  S. Hashimoto,et al.  Antimicrobial activity of geopolymers ion-exchanged with copper ions , 2015 .

[103]  Z. Tišler,et al.  PreParatiOn and PrOPertieS Of fly aSh-baSed geOPOlymer fOamS , 2015 .

[104]  Takaomi Kobayashi,et al.  Cesium-adsorbent Geopolymer Foams Based on Silica from Rice Husk and Metakaolin , 2014 .

[105]  Paolo Colombo,et al.  Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities , 2015 .

[106]  P. Colombo,et al.  Porous Geopolymer Components through Inverse Replica of 3D Printed Sacrificial Templates , 2015 .

[107]  D. Caputo,et al.  Synergistic effect of vegetable protein and silicon addition on geopolymeric foams properties , 2015, Journal of Materials Science.

[108]  Tuan Ngo,et al.  Regulating the chemical foaming reaction to control the porosity of geopolymer foams , 2017 .

[109]  A. Kashani,et al.  Alkali activated slag foams: The effect of the alkali reaction on foam characteristics , 2017 .

[110]  Zhang Lin,et al.  Preparation of phosphoric acid-based porous geopolymers , 2010 .

[111]  Emmanuel Joussein,et al.  Role of alkaline cations and water content on geomaterial foams: Monitoring during formation , 2011 .

[112]  Wei Zhou,et al.  Development of fly ash and iron ore tailing based porous geopolymer for removal of Cu(II) from wastewater , 2016 .

[113]  W. Rickard,et al.  Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire , 2014 .

[114]  Andreas Lampropoulos,et al.  Development of geopolymer mortar under ambient temperature for in situ applications , 2016 .

[115]  Abang Abdullah Abang Ali,et al.  Properties and applications of foamed concrete; a review , 2015 .

[116]  V. Ducman,et al.  Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents , 2016 .

[117]  M. Cyr,et al.  Porous structure optimisation of flash-calcined metakaolin/fly ash geopolymer foam concrete , 2018 .

[118]  V. Medri,et al.  Geopolymers as solid adsorbent for CO2 capture , 2016 .

[119]  K. K. Schiller,et al.  Strength of porous materials , 1971 .

[120]  L. Soriano,et al.  Geopolymer eco-cellular concrete (GECC) based on fluid catalytic cracking catalyst residue (FCC) with addition of recycled aluminium foil powder , 2017 .

[121]  M. Svoboda,et al.  Synthesis of open-cell ceramic foam derived from geopolymer precursor via replica technique , 2017 .

[122]  A. Korjakins,et al.  New Porous Material Made from Industrial and Municipal Waste for Building Application , 2014 .

[123]  L. Laghi,et al.  Porous Geopolymer Insulating Core from a Metakaolin/Biomass Ash Composite , 2017 .

[124]  C. Leonelli,et al.  Cumulative pore volume, pore size distribution and phases percolation in porous inorganic polymer composites: Relation microstructure and effective thermal conductivity , 2015 .

[125]  Paolo Colombo,et al.  High-porosity geopolymer foams with tailored porosity for thermal insulation and wastewater treatment , 2017 .

[126]  A. Licciulli,et al.  Microwave synthesis of thermal insulating foams from coal derived bottom ash , 2015 .

[127]  Fernando Pacheco-Torgal,et al.  Alkali-activated binders: A review. Part 2. About materials and binders manufacture , 2008 .

[128]  V. Medri,et al.  Insights into the macroporosity of freeze-cast hierarchical geopolymers , 2016 .

[129]  S. Bernal,et al.  Geopolymers and Related Alkali-Activated Materials , 2014 .

[130]  P. Colombo,et al.  Geopolymer foams obtained by the saponification/peroxide/gelcasting combined route using different soap foam precursors , 2017 .

[131]  Rubina Chaudhary,et al.  Mechanism of geopolymerization and factors influencing its development: a review , 2007 .

[132]  E. Vance,et al.  Relative strengths of phosphoric acid-reacted and alkali-reacted metakaolin materials , 2008 .

[133]  Y. Liew,et al.  Structure and properties of clay-based geopolymer cements: A review , 2016 .

[134]  S. Beecham,et al.  The relationship between porosity and strength for porous concrete , 2011 .

[135]  R. Rice,et al.  Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations , 1993, Journal of Materials Science.

[136]  Tao Hu,et al.  Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer , 2018, Environmental technology.

[137]  S. Chao,et al.  Effects of foam agent on characteristics of thin‐film transistor liquid crystal display waste glass‐metakaolin‐based cellular geopolymer , 2014 .

[138]  V. Ducman,et al.  The influence of the stabilizing agent SDS on porosity development in alkali-activated fly-ash based foams , 2017 .

[139]  V. Medri,et al.  Alkali-bonded ceramics with hierarchical tailored porosity , 2013 .

[140]  Martyn V. Twigg,et al.  Fundamentals and applications of structured ceramic foam catalysts , 2007 .

[141]  H. Engqvist,et al.  Mechanically strong geopolymers offer new possibilities in treatment of chronic pain. , 2010, Journal of controlled release : official journal of the Controlled Release Society.

[142]  P. Colombo,et al.  Open cell geopolymer foams by a novel saponification/peroxide/gelcasting combined route , 2014 .

[143]  Sudhanshu Sharma,et al.  Calcium-modified hierarchically porous aluminosilicate geopolymer as a highly efficient regenerable catalyst for biodiesel production , 2015 .

[144]  J. Davidovits.  Geopolymers : inorganic polymeric new materials , 1991 .