Advanced Surface Engineering Approaches for Exotic Applications

[1]  Y. Jeon,et al.  Review on Machine Learning Based Welding Quality Improvement , 2023, International Journal of Precision Engineering and Manufacturing-Smart Technology.

[2]  B. Min,et al.  Inlet Hole Shape Analysis Depending on the Focus Conditions for Electron Beam Micro-hole Drilling , 2023, International Journal of Precision Engineering and Manufacturing.

[3]  A. Lasagni,et al.  Fine-Tuning Effect of Direct Laser Interference Patterning on the Surface States and the Corrosion Behavior of a Biomedical Additively Manufactured Beta Ti Alloy , 2023, SSRN Electronic Journal.

[4]  Jong-Won Jeon,et al.  Parameter Optimization of WAAM with Pulsed GMAW for Manufacturing Propeller-Shaped Blade , 2023, International Journal of Precision Engineering and Manufacturing.

[5]  Yang Bai,et al.  Influence of laser parameters on corrosion resistance of laser melting layer on C45E4 steel surface , 2023, Journal of Manufacturing Processes.

[6]  Jaehyeok Doh,et al.  Investigation of Fatigue Characteristics for Heat Exchanger Tube in Air Conditioner: Effect of Surface Defect and Environmental Factor , 2023, International Journal of Precision Engineering and Manufacturing.

[7]  M. Hernandez-Rodriguez,et al.  Effect of laser surface texturing and boriding on the tribocorrosion resistance of an ASTM F-1537 cobalt alloy , 2023, Wear.

[8]  W. Cai,et al.  Effect of nanosecond laser shock peening on residual stress, corrosion and tribocorrosion behavior of WE43 magnesium alloys , 2023, Wear.

[9]  Zhengjia Huang,et al.  Prediction of mechanical properties and surface roughness of FGH4095 superalloy treated by laser shock peening based on XGBoost , 2023, Journal of Alloys and Metallurgical Systems.

[10]  Minjung Kang,et al.  Effects of Laser and Tungsten Arc Welding Processes on the Thermal Softening and Mechanical Properties of Almag6 Aluminum Alloy , 2023, International Journal of Precision Engineering and Manufacturing.

[11]  W. Liu,et al.  The Significantly Enhanced Mechanical and Tribological Performances of the Dual Plasma Nitrided and PVD Coated Ti6Al4V Alloy , 2023, International Journal of Precision Engineering and Manufacturing.

[12]  T. Devasena,et al.  Improved Mechanical Properties of Nano Structured 316L Stainless Steel by Statistically Optimized Low Pulsed Laser Shock Peening Process for Aeronautical Application. , 2023, Optik.

[13]  Ganesh G. Dongre,et al.  Achieving controlled topography and wettability through laser surface texturing of Ti6Al4V for bioengineering applications , 2023, Results in Engineering.

[14]  Liucheng Zhou,et al.  Microstructure and residual stress modulation of 7075 aluminum alloy for improving fatigue performance by laser shock peening , 2023, International Journal of Machine Tools and Manufacture.

[15]  Sung-Tae Hong,et al.  Friction-Assisted Dissimilar Solid State Lap Joining of Aluminum and Copper Pipes , 2022, International Journal of Precision Engineering and Manufacturing.

[16]  G. Wen,et al.  On-line evaluation and monitoring technology for material surface integrity in laser shock peening - A review , 2022, Journal of Materials Processing Technology.

[17]  Sung-Tae Hong,et al.  Effects of the microstructure on the fatigue fracture of friction stir lap welded Al-clad Al and Al-clad steel sheets , 2022, Journal of Materials Research and Technology.

[18]  H. Ki,et al.  Investigation of microstructure and residual stress development during laser surface melting of AH36 steel using 3-D fully coupled numerical model , 2022, International Journal of Heat and Mass Transfer.

[19]  Sangwoo Han,et al.  Development of Plasma Arc Spot Welding Process and Finite Element Method Analysis Model for Predicting Fracture Strength: Part 1—Development of Plasma Arc Spot Welding Process , 2022, International Journal of Precision Engineering and Manufacturing.

[20]  Yanxi Zhang,et al.  Improved Convolutional Neural Network for Laser Welding Defect Prediction , 2022, International Journal of Precision Engineering and Manufacturing.

[21]  A. Lasagni,et al.  On the wetting behavior of laser-microtextured stainless steel using Direct Laser Interference Patterning , 2022, Surface and Coatings Technology.

[22]  X. Ren,et al.  Effect of Laser Surface Texturing Depth and Pattern on the Bond Strength and Corrosion Performance of Phosphate Conversion Coating on Magnesium Alloy , 2022, SSRN Electronic Journal.

[23]  K. Ganesa Balamurugan.  Effect of Laser Surface Texturing parameters on the texture formation in pure magnesium substrate , 2022, Materials Today: Proceedings.

[24]  Paulo J. Tavares,et al.  Fatigue behaviour of laser shock peened AISI D2 tool steel , 2022, International Journal of Fatigue.

[25]  M. Kim,et al.  Electrically assisted pressure joining of thin bi-layer aluminum-clad aluminum sheets , 2022, The International Journal of Advanced Manufacturing Technology.

[26]  M. Szkodo,et al.  Corrosion Properties of Dissimilar AA6082/AA6060 Friction Stir Welded Butt Joints in Different NaCl Concentrations , 2022, International Journal of Precision Engineering and Manufacturing-Green Technology.

[27]  S. Karimi,et al.  Effect of Friction Stir Welding Parameters on Microstructure and Corrosion Behavior of 2101 Duplex Stainless Steel in Simulated Body Fluid , 2022, International Journal of Precision Engineering and Manufacturing-Green Technology.

[28]  Â. Cunha,et al.  The effect of laser surface textures on the corrosion resistance of epoxy coated steel exposed to aggressive environments for offshore applications , 2022, Surface and Coatings Technology.

[29]  P. Ganesh,et al.  Effect of laser shock peening on ratcheting strain accumulation, fatigue life and bulk texture evolution in HSLA steel , 2022, International Journal of Fatigue.

[30]  S. M. Shariff,et al.  Effect of hydrodynamics and laser surface melting on erosion-corrosion of X70 steel pipe elbow in oilfield slurry , 2022, International Journal of Pressure Vessels and Piping.

[31]  M. Bandini,et al.  On the effects of laser shock peening on fatigue behavior of V-notched AlSi10Mg manufactured by laser powder bed fusion , 2022, International Journal of Fatigue.

[32]  Yongkang Zhang,et al.  Evaluation of oblique laser shock peening effect of FGH95 superalloy turbine disk material , 2022, Materials Today Communications.

[33]  K. Song,et al.  Realization of Enhanced Mechanical Properties of Solid-State Welded Ti Alloy with Commercial Purity , 2022, International Journal of Precision Engineering and Manufacturing.

[34]  D. Xiong,et al.  Direct laser texturing technique for metal surfaces to achieve superhydrophobicity , 2022, Materials Today Physics.

[35]  Hoon Cho,et al.  Friction stir butt-welding of roll cladded aluminum thin sheets: effect of microstructural and texture changes on mechanical properties , 2022, Materials Science and Engineering: A.

[36]  P. Peyre,et al.  Laser surface melting of nickel-based alloy reduces nickel release in the primary cooling system of a nuclear power plant , 2021 .

[37]  A. N. Jinoop,et al.  Study of melt pool geometry and solidification microstructure during laser surface melting of Inconel 625 alloy , 2021 .

[38]  Serdar Mercan.  Joining Dissimilar Material Pairs by Mechanical Locking Method (MLM) , 2021, International Journal of Precision Engineering and Manufacturing.

[39]  Ji-Hun Kim,et al.  Evaluation of Surface Characteristics with Pre-treatment Polishing Process in Pulsed Laser Polishing AISI 4140 Mold Steel , 2021, International Journal of Precision Engineering and Manufacturing.

[40]  Rui Liu,et al.  Mechanical property and strengthening mechanism on DH36 marine steel after laser surface melting , 2021, Surface and Coatings Technology.

[41]  Weiqi Wang,et al.  Performance enhancement in Sb2S3 solar cell processed with direct laser interference patterning , 2021 .

[42]  X. Ren,et al.  Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening , 2021 .

[43]  C. Marino,et al.  Effect of nitrogen plasma immersion ion implantation on the corrosion protection mechanisms of different stainless steels , 2021 .

[44]  K. Sahu,et al.  Fractal behavior of surface oxide crack patterns on AISI 4140 high-strength low-alloy steel exposed to the simulated offshore environment , 2021 .

[45]  Sung-Tae Hong,et al.  Friction Stir Spot Butt Welding of Dissimilar S45C Steel and 6061-T6 Aluminum Alloy , 2021, Metals.

[46]  D. Leonard,et al.  Surface and subsurface characterization of laser-interference structured Ti6Al4V , 2021, Applied Surface Science.

[47]  Jiwang Yan,et al.  Microscale Surface Patterning of Zirconia by Femtosecond Pulsed Laser Irradiation , 2021, International Journal of Precision Engineering and Manufacturing-Green Technology.

[48]  Yalin Dong,et al.  Recent Developments and Novel Applications of Laser Shock Peening: A Review , 2021, Advanced Engineering Materials.

[49]  Rui-hong Li,et al.  Microstructure and Mechanical Characteristics of Dissimilar TIG Welded 9% Cr Heat-Resistant Steels Joints , 2021, International Journal of Precision Engineering and Manufacturing.

[50]  C. Körner,et al.  Electron beam wire cladding of nickel alloys and stainless steel on a reactor pressure vessel steel , 2021 .

[51]  C. Kuo,et al.  Design, Analytical and Experimental Evaluations of Additive Manufacturing for Laser Melting of Polymer-Metal Colloids , 2021, International Journal of Precision Engineering and Manufacturing.

[52]  S. Castagne,et al.  Laser surface texturing of zirconia-based ceramics for dental applications: A review. , 2021, Materials science & engineering. C, Materials for biological applications.

[53]  Yalin Lu,et al.  Effect of Multi-pass Friction Stir Processing on Microstructures and Mechanical Behaviors of As-Cast 2A14 Aluminum Alloy , 2021, Journal of Materials Engineering and Performance.

[54]  Liucheng Zhou,et al.  Fatigue performance improvement of laser shock peened hole on powder metallurgy Ni-based superalloy labyrinth disc , 2021 .

[55]  Harish C. Barshilia,et al.  Surface Modification Technologies for Aerospace and Engineering Applications: Current Trends, Challenges and Future Prospects , 2021, Transactions of the Indian National Academy of Engineering.

[56]  A. Redondo-Cubero,et al.  Current status and future developments of the ion beam facility at the centre of micro-analysis of materials in Madrid , 2021, The European Physical Journal Plus.

[57]  A. Lasagni,et al.  Tailored wetting of copper using precise nanosecond direct laser interference patterning , 2021 .

[58]  B. B. Pradhan,et al.  Laser Surface Texturing for Biomedical Applications: A Review , 2021 .

[59]  Taekyum Kim,et al.  Experimental Investigation on CO2 Laser-Assisted Micro-Grinding Characteristics of Al2O3 , 2020, International Journal of Precision Engineering and Manufacturing.

[60]  Weifeng He,et al.  Softening and hardening on a Zr-based bulk metallic glass induced by nanosecond laser surface melting , 2020, Materials Science and Engineering: A.

[61]  E. Asmatulu,et al.  Wettability Transition for Laser Textured Surfaces: A Comprehensive Review , 2020 .

[62]  S. Valkov,et al.  Electron-Beam Surface Treatment of Metals and Alloys: Techniques and Trends , 2020, Metals.

[63]  Bo Chen,et al.  Laser joining of CFRTP to titanium alloy via laser surface texturing , 2020 .

[64]  Sung-Tae Hong,et al.  Manufacturing of magnesium/aluminum bimetallic ring components by friction stir assisted simultaneous forging and solid-state joining , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[65]  Guglielmo S. Aglietti,et al.  Current Challenges and Opportunities for Space Technologies , 2020, Frontiers in Space Technologies.

[66]  Sumit Sharma,et al.  Electron Beam Surface Treatment of 316L Austenitic Stainless Steel: Improvements in Hardness, Wear, and Corrosion Resistance , 2020, Metals and Materials International.

[67]  A. Amanov,et al.  Effect of Laser Shock Peening on Properties of Heat-Treated Ti–6Al–4V Manufactured by Laser Powder Bed Fusion , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[68]  B. Mao,et al.  Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review , 2020 .

[69]  I. S. Han,et al.  Precise Arrays of Epitaxial Quantum Dots Nucleated by In Situ Laser Interference for Quantum Information Technology Applications , 2020, ACS applied nano materials.

[70]  Xiaobin Tang,et al.  Radiation-induced swelling and hardening of 316L stainless steel fabricated by selected laser melting , 2020 .

[71]  J. Gumpinger,et al.  Aluminium to Carbon Fibre Reinforced Polymer tubes joints produced by magnetic pulse welding , 2019 .

[72]  Aline Capella de Oliveira,et al.  Surface modification of aluminum alloys with carbon nanotubes by laser surface melting , 2019, Surface and Coatings Technology.

[73]  Yu Cao,et al.  Controllable drop splashing on picosecond laser patterned hybrid superhydrophobic/-philic surfaces , 2019, Applied Surface Science.

[74]  V. Tangwarodomnukun,et al.  Experimental investigation and modeling of laser surface melting process for AISI 9254 commercially high silicon spring steel , 2019, Optics & Laser Technology.

[75]  Sumit Sharma,et al.  Surface modification of structural material for nuclear applications by electron beam melting: enhancement of microstructural and corrosion properties of Inconel 617 , 2019, SN Applied Sciences.

[76]  Manan Shah,et al.  Effect of Corrosion on Crude Oil and Natural Gas Pipeline with Emphasis on Prevention by Ecofriendly Corrosion Inhibitors: A Comprehensive Review , 2019, Journal of Bio- and Tribo-Corrosion.

[77]  B. Mao,et al.  Abnormal twin-twin interaction in an Mg-3Al-1Zn magnesium alloy processed by laser shock peening , 2019, Scripta Materialia.

[78]  N. Eliaz.  Corrosion of Metallic Biomaterials: A Review , 2019, Materials.

[79]  Q. Ma,et al.  Enhanced lubrication effect of gallium-based liquid metal with laser textured surface , 2019, Tribology International.

[80]  H. Reuther,et al.  Recent experiments on plasma immersion ion implantation (and deposition) using discharges inside metal tubes , 2018, Surface and Coatings Technology.

[81]  F. Serbena,et al.  Surface mechanics and wear resistance of supermartensitic stainless steel nitrided by plasma immersion ion implantation , 2018, Surface and Coatings Technology.

[82]  B. Mao,et al.  Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy , 2018, Applied Surface Science.

[83]  S. Konovalov,et al.  Structure and properties changes of Al-Si alloy treated by pulsed electron beam , 2018, Materials Letters.

[84]  T. Scott,et al.  A review of uranium corrosion by hydrogen and the formation of uranium hydride , 2018 .

[85]  Y. Cui.  Influence of laser surface melting on tribological behaviour of AZ31B , 2018 .

[86]  Dehua Zhu,et al.  Anti-biofouling superhydrophobic surface fabricated by picosecond laser texturing of stainless steel , 2018 .

[87]  Yang Wang,et al.  Investigations on femtosecond laser modified micro-textured surface with anti-friction property on bearing steel GCr15 , 2018 .

[88]  A. Riveiro,et al.  Laser Surface Texturing of Polymers for Biomedical Applications , 2018, Front. Phys..

[89]  Yun-han Ling,et al.  Corrosion resistance and mechanism of CeN, TiN and CeN/TiN bilayer composite film deposited by dual ion beam sputtering , 2018 .

[90]  Xuesong Zhang,et al.  Recent advances in the development of aerospace materials , 2018 .

[91]  M. Liedke,et al.  Microstructure, defect structure and hydrogen trapping in zirconium alloy Zr-1Nb treated by plasma immersion Ti ion implantation and deposition , 2018 .

[92]  A. Hedayat,et al.  A review on hydrogen generation, explosion, and mitigation during severe accidents in light water nuclear reactors , 2017 .

[93]  Fangwei Zhang,et al.  Identifying Critical Factors of Oil Spill in the Tanker Shipping Industry Worldwide , 2017 .

[94]  Yanwen Zhang,et al.  Irradiation effects of displacement damage and gas atoms in Yttria-stabilized zirconia irradiated by Au and helium ions , 2017 .

[95]  S. Kanmani Subbu,et al.  Performance of laser surface textured high speed steel cutting tool in machining of Al7075-T6 aerospace alloy , 2017 .

[96]  M. Ueda,et al.  Magnetic-field enhanced plasma immersion ion implantation and deposition (PIII&D) of diamond-like carbon films inside tubes , 2017 .

[97]  L. Voleský,et al.  Effect of titanium ion implantation and deposition on hydrogenation behavior of Zr-1Nb alloy , 2016 .

[98]  M. Ge,et al.  Effect of laser shock peening on microstructure and fatigue crack growth rate of AZ31B magnesium alloy , 2016 .

[99]  M. Węglowski,et al.  Electron beam welding – Techniques and trends – Review , 2016 .

[100]  G. D. Smith,et al.  Atomic-scale Studies of Uranium Oxidation and Corrosion by Water Vapour , 2016, Scientific Reports.

[101]  S. Hao,et al.  Producing nano-grained and Al-enriched surface microstructure on AZ91 magnesium alloy by high current pulsed electron beam treatment , 2016 .

[102]  M. Syrtanov,et al.  Influence of plasma immersion titanium implantation on hydrogenation and mechanical properties of Zr–2.5Nb , 2016 .

[103]  Patrick J. Smith,et al.  Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications , 2015 .

[104]  Shuai Wang,et al.  Hydrogen Embrittlement Understood , 2015, Metallurgical and Materials Transactions A.

[105]  M. Brandt,et al.  The role of microstructural characteristics in the cavitation erosion behaviour of laser melted and laser processed Nickel–Aluminium Bronze , 2014 .

[106]  A. Clare,et al.  The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy , 2014 .

[107]  M. Nastasi,et al.  Ion Beam Analysis: Fundamentals and Applications , 2014 .

[108]  R. Srinivasan,et al.  Hydrogen Embrittlement of Ferritic Steels: Deformation and Failure Mechanisms and Challenges in the Oil and Gas Industry , 2014 .

[109]  Ravi Bathe,et al.  Laser surface texturing of gray cast iron for improving tribological behavior , 2014 .

[110]  Xiaolin Wang,et al.  Recent advances in study of uranium surface chemistry in China , 2014 .

[111]  G. Tang,et al.  Effect of high current pulsed electron beam irradiation on wear and corrosion resistance of Ti6Al4V , 2013 .

[112]  T. Perez.  Corrosion in the Oil and Gas Industry: An Increasing Challenge for Materials , 2013 .

[113]  H. Natu,et al.  Improvement of wear resistance of Hastelloy C-276 through laser surface melting , 2013 .

[114]  R. Srinivasan,et al.  Hydrogen embrittlement of ferritic steels: Observations on deformation microstructure, nanoscale dimples and failure by nanovoiding , 2012 .

[115]  S. Harimkar,et al.  Laser Surface Engineering of Magnesium Alloys: A Review , 2012 .

[116]  Eric Mazur,et al.  Pulsed-laser hyperdoping and surface texturing for photovoltaics , 2011 .

[117]  M. Odén,et al.  Machining performance and decomposition of TiAlN/TiN multilayer coated metal cutting inserts , 2011 .

[118]  May L. Martin,et al.  Interpreting hydrogen-induced fracture surfaces in terms of deformation processes: A new approach , 2011 .

[119]  K. Lo,et al.  Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels , 2011 .

[120]  G. Agarwal,et al.  Ion beam induced surface and interface engineering , 2011 .

[121]  C. Lu,et al.  Interference lithography: a powerful tool for fabricating periodic structures , 2010 .

[122]  Zhong Long,et al.  Corrosion resistance of modified layer on uranium formed by plasma immersion ion implantation , 2010 .

[123]  Bruce A. Banks,et al.  Degradation of Spacecraft Materials in the Space Environment , 2010 .

[124]  V. Balasubramanian,et al.  Mechanical property and microstructural changes during friction stir processing of cast aluminum 2285 alloy , 2009 .

[125]  N. Dahotre,et al.  Effect of laser surface treatment on corrosion and wear resistance of ACM720 Mg alloy , 2008 .

[126]  A. Reiter,et al.  Hybrid technology hard coating – Electron beam surface hardening , 2007 .

[127]  Jonghwa Chang,et al.  Effects of ion beam mixing of silicon carbide film deposited onto metallic materials for application to nuclear hydrogen production , 2007 .

[128]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[129]  M. Uhrmacher,et al.  Interface mixing and magnetism in Ni/Si bilayers irradiated with swift and low-energy heavy ions , 2006 .

[130]  Peter Skeldon,et al.  Corrosion behaviour of laser-melted magnesium alloys , 2005 .

[131]  P. Chu,et al.  Plasma immersion ion implantation of insulating materials , 2005 .

[132]  Yun Tian,et al.  Research progress on laser surface modification of titanium alloys , 2005 .

[133]  Claus Daniel,et al.  Laser interference metallurgy-periodic surface patterning and formation of intermetallics , 2005 .

[134]  Masato Yamashita,et al.  Characterization of (Ti, Al)N films prepared by ion mixing and vapor deposition , 2004 .

[135]  Lourdes Pelaz,et al.  Ion-beam-induced amorphization and recrystallization in silicon , 2004 .

[136]  I. H. Tan,et al.  Treatment of polymers by plasma immersion ion implantation for space applications , 2004 .

[137]  M. Nagumo.  Hydrogen related failure of steels – a new aspect , 2004 .

[138]  C. Dong,et al.  Numerical simulation of the thermal-mechanical process of high current pulsed electron beam treatment , 2004 .

[139]  H. Man,et al.  Improvement in cavitation erosion resistance of a copper-based propeller alloy by laser surface melting , 2004 .

[140]  P. R. Rhodes,et al.  Environment-Assisted Cracking of Corrosion-Resistant Alloys in Oil and Gas Production Environments: A Review , 2001 .

[141]  M. Nagumo.  Function of Hydrogen in Embrittlement of High-strength Steels , 2001 .

[142]  W. Ensinger,et al.  Are coatings produced by ion-beam-assisted deposition superior? A comparison of chemical and mechanical properties of steel coated using different deposition techniques , 1992 .

[143]  Michael J. Mirtich,et al.  Ion beam treatment of potential space materials at the NASA Lewis Research Center , 1992 .

[144]  R. A. Oriani,et al.  The necessity of both plasticity and brittleness in the fracture thresholds of iron , 1991 .

[145]  K. Sridharan,et al.  Ion beam assisted coating and surface modification with plasma source ion implantation , 1990 .

[146]  I. Donnelly,et al.  Plasma immersion ion implantation using plasmas generated by radio frequency techniques , 1988 .

[147]  B. E. Wilde,et al.  Surface modification: A potential new approach to combatting hydrogen induced fracture in steel , 1988 .

[148]  J. R. Conrad,et al.  Plasma source ion-implantation technique for surface modification of materials , 1987 .

[149]  B. E. Wilde,et al.  The influence of palladium on the resistance of low alloy steels to hydrogen embrittlement , 1987 .

[150]  R. A. Oriani.  Whitney Award Lecture—1987: Hydrogen—The Versatile Embrittler , 1987 .

[151]  B. E. Wilde,et al.  Effect of palladium additions to AISI 4130 steel on its sulfide cracking susceptibility , 1983 .

[152]  B. E. Wilde,et al.  The Influence of Noble Metal Additions on the Sulfide Corrosion Performance of AISI 4130 Steel , 1982 .

[153]  L. Leger,et al.  Oxygen atom reaction with shuttle materials at orbital altitudes , 1982 .

[154]  Bo Cui,et al.  Improvement of the wear resistance of 20CrMnTi steel gear by discrete laser surface melting , 2023, Optics & Laser Technology.

[155]  Seyed Ali Mousavi,et al.  Laser surface melting of Al–Co–rare earth (Ce–La) alloys for improving corrosion resistance , 2023, Optics & Laser Technology.

[156]  H. Qiao,et al.  Improvement of biocorrosion resistance and antibacterial performance of Ti-3Tu alloy subjected to laser shock peening , 2023, Optics & Laser Technology.

[157]  E. Çakır,et al.  An analysis of severity of oil spill caused by vessel accidents , 2021 .

[158]  Sumit Sharma,et al.  Studies on Electron Beam Surface Melting of AISI 316 Stainless Steel and AISI 347 Stainless Steel , 2017 .

[159]  Yu-kui Gao.  Influence of pulsed electron beam treatment on microstructure and properties of TA15 titanium alloy , 2013 .

[160]  J. Somers,et al.  Novel Production Route of Yttria‐Stabilized Zirconia Fuel Kernels and Pellets for Nuclear Fuel Applications , 2012 .

[161]  L. Overmeyer,et al.  Laser-Surface-Treatment for Photovoltaic Applications , 2012 .

[162]  Roger Wepf,et al.  On the application of focused ion beam nanotomography in characterizing the 3D pore space geometry of Opalinus clay , 2011 .

[163]  Koji Sugioka,et al.  Laser precision microfabrication , 2010 .

[164]  M. Parada,et al.  Low energy ion beam induced changes in ETFE polymer , 2006 .

[165]  Lin Li,et al.  Effect of high power diode laser surface melting on wear resistance of magnesium alloys , 2006 .

[166]  I. Etsion.  State of the art in Laser Surface Texturing , 2004 .

[167]  A. Vázquez,et al.  Elimination of Intergranular Corrosion Susceptibility of a Sensitised 304 Steel by Subsequent Laser Surface Melting , 1989 .

[168]  J. Poate,et al.  Laser surface alloying , 1985 .

[169]  Bruce A. Banks,et al.  Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low earth orbit , 1985 .