A Discrete Element Model for Predicting Shear Strength and Degradation of Rock Joint by Using Compressive and Tensile Test Data

A discrete element model is proposed to examine rock strength and failure. The model is implemented by UDEC, which is developed for this purpose. The material is represented as a collection of irregular-sized deformable particles interacting at their cohesive boundaries. The interface between two adjacent particles is viewed as a flexible contact whose constitutive law controls the material fracture and fragmentation properties. To reproduce rock anisotropy, an orthotropic cohesive law is developed for the contacts, which allows their shear and tensile behaviors to be different from each other. Using a combination of original closed-form expressions and statistical calibrations, a unique set of the contact microparameters are found based on the uniaxial/triaxial compression and Brazilian tension test data of a plaster. Applying the obtained microparameters, joint specimens, made of the same plaster, are simulated, where the comparison of the obtained results to laboratory data shows a reasonable agreement.

[1]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[2]  M. Paterson.  Experimental Rock Deformation: The Brittle Field , 1978 .

[3]  I. Babuska,et al.  On locking and robustness in the finite element method , 1992 .

[4]  Xiaopeng Xu,et al.  Numerical simulations of dynamic crack growth along an interface , 1996 .

[5]  Manil Suri,et al.  ON THE SELECTION OF A LOCKING‐FREE hp ELEMENT FOR ELASTICITY PROBLEMS , 1997 .

[6]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[7]  M Kennedy,et al.  Strategies for improving fermentation medium performance: a review , 1999, Journal of Industrial Microbiology and Biotechnology.

[8]  R. Paul Young,et al.  Micromechanical modeling of cracking and failure in brittle rocks , 2000 .

[9]  Zon-Yee Yang,et al.  An experimental study on the progressive shear behavior of rock joints with tooth-shaped asperities , 2000 .

[10]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[11]  Min Zhou,et al.  Micromechanical Simulation of Dynamic Fracture Using the Cohesive Finite Element Method , 2004 .

[12]  Lorenzo Iannucci,et al.  Formulation and implementation of decohesion elements in an explicit finite element code , 2006 .

[13]  L. Vallejo,et al.  Visualization of Crushing Evolution in Granular Materials under Compression using DEM , 2006 .

[14]  C. Martin,et al.  A clumped particle model for rock , 2007 .

[15]  Ove Stephansson,et al.  Fundamentals of discrete element methods for rock engineering , 2007 .

[16]  Ann Lehman,et al.  JMP start statistics : a guide to statistics and data analysis using JMP , 2012 .

[17]  Jeoung Seok Yoon,et al.  Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation , 2007 .

[18]  Michael Griebel,et al.  Numerical Simulation in Molecular Dynamics: Numerics, Algorithms, Parallelization, Applications , 2007 .

[19]  Fulvio Tonon,et al.  Modeling Lac du Bonnet granite using a discrete element model , 2009 .

[20]  Ning Hu,et al.  Finite element simulation of delamination growth in composite materials using LS-DYNA , 2009 .

[21]  J. Walsh,et al.  The impact of porosity and crack density on the elasticity, strength and friction of cohesive granular materials : insights from DEM modelling , 2009 .

[22]  O. K. Mahabadi,et al.  Y-GUI: A graphical user interface and pre-processor for the combined finite-discrete element code, Y2D, incorporating material heterogeneity , 2010, Comput. Geosci..

[23]  Fibre-reinforcement of granular materials: DEM visualisation and analysis , 2010 .

[24]  Jian Zhao,et al.  Micromechanical parameters in bonded particle method for modelling of brittle material failure , 2010 .

[25]  Sung H. Park,et al.  Extension of Central Composite Design for Second-Order Response Surface Model Building , 2010 .

[26]  Christophe Lanos,et al.  Formulation and Implementation , 2013 .

[27]  Rolf Bader,et al.  Finite-Element Simulation , 2013 .