Thermal barrier coating bonded by (Al2O3–Y2O3)/(Y2O3-stabilized ZrO2) laminated composite coating prepared by two-step cyclic spray pyrolysis

[1]  Yedong He,et al.  Size effect of (Al2O3–Y2O3)/YSZ micro-laminated coating on high-temperature oxidation resistance , 2013 .

[2]  L. Kavitha,et al.  Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition method , 2013 .

[3]  G. Wei,et al.  Theoretical consideration on composite oxide scales and coatings , 2013 .

[4]  T. Grande,et al.  Influence of the precursor solution chemistry on the deposition of thick coatings by spray pyrolysis , 2013 .

[5]  Yedong He,et al.  Influence of Al2O3/YSZ micro-laminated coatings on high temperature oxidation and spallation resistance of MCrAlY alloys , 2013 .

[6]  Yedong He,et al.  High-temperature cyclic oxidation behavior of Al2O3–YAG composite coating prepared by EPD and microwave sintering , 2012 .

[7]  Yedong He,et al.  Superior high-temperature oxidation resistance of a novel (Al2O3–Y2O3)/Pt laminated coating , 2012 .

[8]  Yedong He,et al.  Cyclic oxidation behavior and thermal barrier effect of YSZ–(Al2O3/YAG) double-layer TBCs prepared by the composite sol–gel method , 2011 .

[9]  T. Grande,et al.  Deposition Mechanisms of Thick Lanthanum Zirconate Coatings by Spray Pyrolysis , 2011 .

[10]  Hui Peng,et al.  Cyclic oxidation and interdiffusion behavior of a NiAlDy/RuNiAl coating on a Ni-based single crystal superalloy , 2011 .

[11]  Hui Peng,et al.  Precipitation phases in the nickel-based superalloy DZ 125 with YSZ/CoCrAlY thermal barrier coating , 2011 .

[12]  Ying Wang,et al.  Hot corrosion behaviour of plasma sprayed YSZ/LaMgAl11O19 composite coatings in molten sulfate–vanadate salt , 2011 .

[13]  D. R. Wang,et al.  Fabrication and Characteristics of YSZ–YSZ/Al2O3 Double-Layer TBC , 2011 .

[14]  P. Xiao,et al.  Thermal conductivities of YSZ/Al2O3 composites , 2010 .

[15]  Yedong He,et al.  Al2O3/YSZ Composite Coatings Prepared by a Novel Sol–Gel Process and Their High-Temperature Oxidation Resistance , 2010 .

[16]  S.M.A. Shibli,et al.  Al2O3-ZrO2 mixed oxide composite incorporated aluminium rich zinc coatings for high wear resistance , 2010 .

[17]  F. Pettit,et al.  The behavior of high-purity, low-density air plasma sprayed thermal barrier coatings , 2009 .

[18]  W. Aperador,et al.  Corrosion study of Alumina/Yttria-Stabilized Zirconia (Al2O3/YSZ) nanostructured Thermal Barrier Coatings (TBC) exposed to high temperature treatment , 2009 .

[19]  D. Clarke,et al.  Evolution of thermal properties of EB-PVD 7YSZ thermal barrier coatings with thermal cycling , 2009 .

[20]  K. Kawagishi,et al.  The retention of thermal barrier coating systems on single-crystal superalloys: Effects of substrate composition , 2008 .

[21]  Fusen Yuan,et al.  Oxidation behavior of thermal barrier coatings with HVOF and detonation-sprayed NiCrAlY bondcoats , 2008 .

[22]  Myungchang Kang,et al.  Effects of the laser treatment and thermal oxidation behavior of CoNiCrAlY/ZrO2–8 wt%Y2O3 thermal barrier coating , 2008 .

[23]  T. Pollock,et al.  Hybrid intermetallic Ru/Pt-modified bond coatings for thermal barrier systems , 2007 .

[24]  F. Pettit,et al.  Introduction to the high-temperature oxidation of metals , 2006 .

[25]  L. Singheiser,et al.  Oxidation Characteristics of a Platinized MCrAlY Bond Coat for TBC Systems During Cyclic Oxidation at 1000°C , 2005 .

[26]  A. N. Khan,et al.  Heat treatment of thermal barrier coatings , 2003 .

[27]  P. Wright,et al.  Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling , 2003 .

[28]  E. Jordan,et al.  Thermal Barrier Coatings for Gas-Turbine Engine Applications , 2002, Science.

[29]  F. Sánchez-Bajo,et al.  On the transformation toughening of Y–ZrO2 ceramics with mixed Y–TZP/PSZ microstructures , 2001 .

[30]  E. Jordan,et al.  Application of Cr3+ photoluminescence piezo-spectroscopy to plasma-sprayed thermal barrier coatings for residual stress measurement , 2000 .

[31]  Jong‐Lam Lee,et al.  Structural and Chemical Analyses of a Thermally Grown Oxide Scale in Thermal Barrier Coatings Containing a Platinum–Nickel–Aluminide Bondcoat , 2000 .

[32]  F. Pettit,et al.  High-Temperature Stress Measurements During the Oxidation of NiAl , 2000 .

[33]  L. Deng,et al.  Preparation of thermal barrier coatings for gas turbine blades by EB-PVD , 1998 .

[34]  Y. Chuang,et al.  Measurements of residual stress and bond strength of plasma sprayed laminated coatings , 1997 .

[35]  K. Kendall,et al.  A simple way to make tough ceramics , 1990, Nature.

[36]  Richard Schapery.  Thermal Expansion Coefficients of Composite Materials Based on Energy Principles , 1968 .

[37]  Wei Gao,et al.  Electro-codeposition of Al2O3–Y2O3 composite thin film coatings and their high-temperature oxidation resistance on γ-TiAl alloy , 2012 .

[38]  Yedong He,et al.  Enhanced high-temperature corrosion resistance of (Al2O3–Y2O3)/Pt micro-laminated coatings on 316L stainless steel alloy , 2012 .

[39]  Junguo Gao,et al.  Preparation of YSZ/Al2O3 micro-laminated coatings and their influence on the oxidation and spallation resistance of MCrAlY alloys , 2011 .

[40]  R. Bermejo,et al.  Optimal strength and toughness of Al2O3–ZrO2 laminates designed with external or internal compressive layers , 2008 .

[41]  A. Heuer.  Oxygen and aluminum diffusion in α-Al2O3: How much do we really understand? , 2008 .

[42]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .

[43]  A. Mchale,et al.  Phase equilibria diagrams : phase diagrams for ceramists , 1992 .

[44]  R. Chamberlin,et al.  Chemical Spray Deposition Process for Inorganic Films , 1966 .

[45]  U. R. Evans.  An Introduction to Metallic Corrosion , 1963 .