Scale-up concept of single-channel microreactors from process development to industrial production

Microreactors can perform chemical reactions in tiny channels using continuous-flow processes. The microreactor team at Lonza has designed and tested a series of microstructured devices in continuous-flow plants, and performed lab studies of pharmaceutical reactions with successful transfer to commercial production. Microreactor design and scale-up concept is guided by simple correlations, which are described here and displayed in comprehensive diagrams for hydraulic diameter over typical range of flow rate. This leads to a consistent and straightforward scale-up pathway for single-channel microreactors avoiding parallelization from lab development to pilot-scale production.

[1]  Jun-ichi Yoshida,et al.  Nitro-substituted aryl lithium compounds in microreactor synthesis: switch between kinetic and thermodynamic control. , 2009, Angewandte Chemie.

[2]  Dominique M. Roberge,et al.  Development of an Industrial Multi‐Injection Microreactor for Fast and Exothermic Reactions – Part II , 2008 .

[3]  Norbert Kockmann,et al.  Transport Phenomena in Micro Process Engineering , 2007 .

[4]  Norbert Kockmann,et al.  Micro Process Engineering , 2006 .

[5]  N. Kockmann,et al.  Transitional Flow and Related Transport Phenomena in Curved Microchannels , 2011 .

[6]  Dominique M. Roberge,et al.  Microreactor Technology: A Revolution for the Fine Chemical and Pharmaceutical Industries? , 2005 .

[7]  H. Martin,et al.  The generalized Lévêque equation and its practical use for the prediction of heat and mass transfer rates from pressure drop , 2002 .

[8]  Microfabricated continuous-flow, turbulent, microsecond mixer , 2005 .

[9]  M. Gödde,et al.  Sicherheit in der Mikroreaktionstechnik , 2009 .

[10]  Jun-ichi Yoshida,et al.  Flash Chemistry: Fast Organic Synthesis in Microsystems , 2008 .

[11]  N. Kockmann,et al.  Enabling continuous-flow chemistry in microstructured devices for pharmaceutical and fine-chemical production. , 2008, Chemistry.

[12]  G. Truskey,et al.  Transport phenomena in biological systems , 2004 .

[13]  D. A. Frank-Kamenet︠s︡kiĭ.  Diffusion and heat transfer in chemical kinetics , 1969 .

[14]  Volker Hessel,et al.  Novel Process Windows – Gate to Maximizing Process Intensification via Flow Chemistry , 2009 .

[15]  N. Kockmann.  Pressure Loss and Transfer Rates in Microstructured Devices with Chemical Reactions , 2008 .

[16]  Paul Watts,et al.  Continuous Flow Reactors, a Tool for the Modern Synthetic Chemist , 2008 .

[17]  Paul Watts,et al.  Green chemistry: synthesis in micro reactors , 2003 .

[18]  Dominique M. Roberge,et al.  Dibal-H Reduction of Methyl Butyrate into Butyraldehyde using Microreactors , 2008 .

[19]  Peter H Seeberger,et al.  Microreactors as tools for synthetic chemists-the chemists' round-bottomed flask of the 21st century? , 2006, Chemistry.

[20]  Laurent Ducry,et al.  Controlled autocatalytic nitration of phenol in a microreactor. , 2005, Angewandte Chemie.

[21]  Norbert Kockmann,et al.  Harsh Reaction Conditions in Continuous‐Flow Microreactors for Pharmaceutical Production , 2009 .

[22]  John R. Bourne,et al.  Mixing and the Selectivity of Chemical Reactions , 2003 .