论文信息 - Experimental research on preamplifier for high power Yb-doped fiber pulse amplification

Experimental research on preamplifier for high power Yb-doped fiber pulse amplification

By using cascaded Wavelength Division Multiplexing and pumping in sectionalization method, ASE and feedback were greatly suppressed. At repetition rate of 50kHz and pulse duration of 20ns, gain of amplified signal was 17.1dB with a high signal to noise ratio of 25dB. The whole system is a good choice for a preamplifier of high-power pulse amplification. ©2010 Optical Society of America OCIS codes: (140.4480) Optical amplifiers, (000.0000) Ytterbium fiber, (220.4830) Fiber optics amplifiers and oscillators

[1] J. Marciante,et al. High-gain, polarization-preserving, Yb-doped fiber amplifier for low-duty-cycle pulse amplification , 2005, 2005 Quantum Electronics and Laser Science Conference.

[2] J R Taylor,et al. High-peak-power femtosecond pulse compression with polarization-maintaining ytterbium-doped fiber amplification. , 2007, Optics letters.

[3] Kai-Hsiu Liao,et al. High Peak Power Pulse Amplification in Large-Core Yb-Doped Fiber Amplifiers , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[4] Almantas Galvanauskas,et al. High-energy and high-peak-power nanosecond pulse generation with beam quality control in 200-microm core highly multimode Yb-doped fiber amplifiers. , 2005, Optics letters.

[5] M. Ibsen,et al. 321 W average power, 1 GHz, 20 ps, 1060 nm pulsed fiber MOPA source , 2005, OFC/NFOEC Technical Digest. Optical Fiber Communication Conference, 2005..

[6] C. D. de Matos,et al. Multi-kilowatt, all-fiber integrated chirped-pulse amplification system yielding 40x pulse compression using air-core fiber and conventional erbium-doped fiber amplifier. , 2004, Optics express.