Recent advances in energy harvesting technology and techniques

Energy harvesting is a fertile and rapidly expanding area of research due to the promises of providing a means for replacing conventional methods of powering electronic sensor and communication systems. This paper presents a review of the state-of-the-art of different energy harvesting (scavenging) technologies and describes their performance. With similar emphasis, this paper also presents a review of circuit configurations and techniques for low power interfaces between microgenerators and loads that aim to extract maximum power while dissipating minimum power. A brief review of each recent relevant paper is given to introduce the current state of the field of energy harvesting.

[1]  Chunhua Liu,et al.  An Efficient Wind–Photovoltaic Hybrid Generation System Using Doubly Excited Permanent-Magnet Brushless Machine , 2010, IEEE Transactions on Industrial Electronics.

[2]  Neil M. White,et al.  Improving Output Power of Piezoelectric Energy Harvesters using Multilayer Structures , 2011 .

[3]  Daniel J. Inman,et al.  Powering pacemakers from heartbeat vibrations using linear and nonlinear energy harvesters , 2012 .

[4]  C. Himes,et al.  Ultralow Voltage Nanoelectronics Powered Directly, and Solely, From a Tree , 2010, IEEE Transactions on Nanotechnology.

[5]  Mary Ann Ingram,et al.  Using range extension cooperative transmission in energy harvesting wireless sensor networks , 2012, Journal of Communications and Networks.

[6]  Georg Brasseur,et al.  Strong and Weak Electric Field Interfering: Capacitive Icing Detection and Capacitive Energy Harvesting on a 220-kV High-Voltage Overhead Power Line , 2011, IEEE Transactions on Industrial Electronics.

[7]  Wen-Jong Wu,et al.  Self-powered piezoelectric energy harvesting device using velocity control synchronized switching technique , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[8]  Peng Zeng,et al.  Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art , 2010, IEEE Transactions on Industrial Electronics.

[9]  Xi Chen,et al.  1.6 V nanogenerator for mechanical energy harvesting using PZT nanofibers. , 2010, Nano letters.

[10]  B. H. Stark,et al.  Review of Power Conditioning for Kinetic Energy Harvesting Systems , 2012, IEEE Transactions on Power Electronics.

[11]  Kelvii Wei Guo,et al.  Green nanotechnology of trends in future energy: a review , 2012 .

[12]  Leila Parsa,et al.  Design and Implementation of a Direct AC–DC Boost Converter for Low-Voltage Energy Harvesting , 2011, IEEE Transactions on Industrial Electronics.

[13]  Robert Puers,et al.  Power Processing Circuits for Piezoelectric Vibration-Based Energy Harvesters , 2010, IEEE Transactions on Industrial Electronics.

[14]  Othman Sidek,et al.  A review of vibration-based MEMS piezoelectric energy harvesters , 2011 .

[15]  Siyuan He,et al.  Improving Power Density of a Cantilever Piezoelectric Power Harvester Through a Curved L-Shaped Proof Mass , 2010, IEEE Transactions on Industrial Electronics.

[16]  Takayasu Sakurai,et al.  A 80-mV input, fast startup dual-mode boost converter with charge-pumped pulse generator for energy harvesting , 2011, IEEE Asian Solid-State Circuits Conference 2011.

[17]  D. Inman,et al.  Resistive Impedance Matching Circuit for Piezoelectric Energy Harvesting , 2010 .

[18]  Xiaoying Gan,et al.  Energy efficient sequential sensing in multi-user cognitive ad hoc networks: A consideration of an ADC device , 2012, Journal of Communications and Networks.

[19]  Aylin Yener,et al.  Sum-rate optimal power policies for energy harvesting transmitters in an interference channel , 2011, Journal of Communications and Networks.

[20]  Ali Muhtaroglu,et al.  Hybrid energy harvesting from keyboard , 2011, 2011 International Conference on Energy Aware Computing.

[21]  José Higino Correia,et al.  Thermoelectric generator and solid-state battery for stand-alone microsystems , 2010 .

[22]  Daniele Davino,et al.  A Two-Port Nonlinear Model for Magnetoelastic Energy-Harvesting Devices , 2011, IEEE Transactions on Industrial Electronics.

[23]  Pedro Lluís Miribel-Català,et al.  A Multiharvested Self-Powered System in a Low-Voltage Low-Power Technology , 2011, IEEE Transactions on Industrial Electronics.

[24]  Ping Li,et al.  A Magnetoelectric Composite Energy Harvester and Power Management Circuit , 2011, IEEE Transactions on Industrial Electronics.

[25]  Anna Richelli,et al.  A DC/DC Boosting Technique and Power Management for Ultralow-Voltage Energy Harvesting Applications , 2012, IEEE Transactions on Industrial Electronics.

[26]  Michael C. McAlpine,et al.  Enhanced piezoelectricity and stretchability in energy harvesting devices fabricated from buckled PZT ribbons. , 2011, Nano letters.

[27]  Sanjib Kumar Panda,et al.  Energy Harvesting From Hybrid Indoor Ambient Light and Thermal Energy Sources for Enhanced Performance of Wireless Sensor Nodes , 2011, IEEE Transactions on Industrial Electronics.

[28]  Yu-Chen Lin,et al.  Dynamically alternating power saving scheme for IEEE 802.16e mobile broadband wireless access systems , 2012, Journal of Communications and Networks.

[29]  Anthony Ephremides,et al.  Optimal packet scheduling for energy harvesting sources on time varying wireless channels , 2012, Journal of Communications and Networks.

[30]  Anthony Ephremides,et al.  Optimal utilization of a cognitive shared channel with a rechargeable primary source node , 2012, Journal of Communications and Networks.

[31]  Kyungwhoon Cheun,et al.  An efficient sliding window algorithm using adaptive-length guard window for turbo decoders , 2012, Journal of Communications and Networks.

[32]  Deniz Gündüz,et al.  A general framework for the optimization of energy harvesting communication systems with battery imperfections , 2011, Journal of Communications and Networks.

[33]  José Gerardo V. da Rocha,et al.  Energy Harvesting From Piezoelectric Materials Fully Integrated in Footwear , 2010, IEEE Transactions on Industrial Electronics.

[34]  Anantha Chandrakasan,et al.  A Battery-Less Thermoelectric Energy Harvesting Interface Circuit With 35 mV Startup Voltage , 2010, IEEE Journal of Solid-State Circuits.

[35]  Vincent Artero,et al.  Artificial Photosynthesis: From Molecular Catalysts for Light‐driven Water Splitting to Photoelectrochemical Cells , 2011, Photochemistry and photobiology.

[36]  Wei-Hsin Liao,et al.  Improved Design and Analysis of Self-Powered Synchronized Switch Interface Circuit for Piezoelectric Energy Harvesting Systems , 2012, IEEE Transactions on Industrial Electronics.

[37]  Mona Mostafa Hella,et al.  Analysis and Optimization of Asynchronously Controlled Electrostatic Energy Harvesters , 2012, IEEE Transactions on Industrial Electronics.

[38]  Ahmadreza Tabesh,et al.  A Low-Power Stand-Alone Adaptive Circuit for Harvesting Energy From a Piezoelectric Micropower Generator , 2010, IEEE Transactions on Industrial Electronics.

[39]  Jing Yang,et al.  Optimal packet scheduling in a multiple access channel with energy harvesting transmitters , 2012, Journal of Communications and Networks.

[40]  Gabriel Abadal,et al.  Nanostructured graphene for energy harvesting , 2011 .

[41]  J Olivo,et al.  Energy Harvesting and Remote Powering for Implantable Biosensors , 2011, IEEE Sensors Journal.

[42]  Oscar Lopez-Lapena,et al.  A New MPPT Method for Low-Power Solar Energy Harvesting , 2010, IEEE Transactions on Industrial Electronics.

[43]  Mickaël Lallart,et al.  Switching Delay Effects on Nonlinear Piezoelectric Energy Harvesting Techniques , 2012, IEEE Transactions on Industrial Electronics.

[44]  Steven D. Novack,et al.  SOLAR NANTENNA ELECTROMAGNETIC COLLECTORS , 2008 .

[45]  Gonghu Li,et al.  Energy conversion in natural and artificial photosynthesis. , 2010, Chemistry & biology.

[46]  João Paulo Pereira do Carmo,et al.  Thermoelectric Microconverter for Energy Harvesting Systems , 2010, IEEE Transactions on Industrial Electronics.

[47]  M. Graetzel,et al.  Artificial photosynthesis: biomimetic approaches to solar energy conversion and storage. , 2010, Current opinion in biotechnology.