The influence of process parameters on in situ inorganic foaming of alkali-bonded SiC based foams

[1]  V. Medri,et al.  Alkali-bonded SiC based foams , 2012 .

[2]  Waltraud M. Kriven,et al.  Composite Cold Ceramic Geopolymer in a Refractory Application , 2012 .

[3]  Waltraud M. Kriven,et al.  Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites , 2012 .

[4]  Jonathan L. Bell,et al.  Thermal Conversion and Microstructural Evaluation of Geopolymers or “Alkali Bonded Ceramics” (ABCs) , 2012 .

[5]  P. Colombo,et al.  Silicon carbide-based foams from direct blowing of polycarbosilane , 2012 .

[6]  Angelo Vaccari,et al.  SiC-based refractory paints prepared with alkali aluminosilicate binders , 2011 .

[7]  V. Medri,et al.  Role of the morphology and the dehydroxylation of metakaolins on geopolymerization , 2010 .

[8]  P. Michaud,et al.  Silica fume as porogent agent in geo-materials at low temperature , 2010 .

[9]  C. Kaps,et al.  Geopolymeric binders with different fine fillers — Phase transformations at high temperatures , 2009 .

[10]  J. Deja,et al.  Spectroscopic studies of alkaline activated slag geopolymers , 2009 .

[11]  Waltraud M. Kriven,et al.  Preparation of Ceramic Foams from Metakaolin‐Based Geopolymer Gels , 2009 .

[12]  Yao Xiao,et al.  Role of water in the synthesis of calcined kaolin-based geopolymer , 2009 .

[13]  Tiesong Lin,et al.  Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites , 2008 .

[14]  Eddie,et al.  Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber , 2008 .

[15]  Glykeria Kakali,et al.  Dissolution of aluminosilicate minerals and by-products in alkaline media , 2007 .

[16]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[17]  Perumalsamy N. Balaguru,et al.  Novel geopolymer based composites with enhanced ductility , 2007 .

[18]  André R. Studart,et al.  Processing Routes to Macroporous Ceramics: A Review , 2006 .

[19]  Paolo Colombo,et al.  Conventional and novel processing methods for cellular ceramics , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[20]  Haihong Li,et al.  Synthesis and mechanical properties of metakaolinite-based geopolymer , 2005 .

[21]  Paolo Colombo,et al.  Cellular Ceramics: Structure, Manufacturing, Properties and Applications , 2005 .

[22]  S. Malghan,et al.  Aqueous Processing of Sintered Reaction‐Bonded Silicon Nitride: I, Dispersion Properties of Silicon Powder , 2005 .

[23]  Jonathan L. Bell,et al.  Geopolymers: Nanoparticulate, Nanoporous Ceramics Made Under Ambient Conditions , 2004, Microscopy and Microanalysis.

[24]  Xuejian Liu,et al.  Novel Method To Optimize the Structure of Reticulated Porous Ceramics , 2004 .

[25]  Hua Xu,et al.  The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars , 2003 .

[26]  S. Kanzaki,et al.  Synthesis of Porous Silicon Nitride with Unidirectionally Aligned Channels Using Freeze‐Drying Process , 2002 .

[27]  E. Opila,et al.  High temperature oxidation of ceramic matrix composites , 1998 .

[28]  R. Munro.  Material Properties of a Sintered α-SiC , 1997 .

[29]  W. Vogelsberger,et al.  A contribution to the study of the solubility of oxidic solids in water: The disolution kinetics of silica gel and its interpretation , 1996 .

[30]  T. Merle-Méjean,et al.  OXIDE LAYER ON SILICON CARBIDE POWDER: A FT-IR INVESTIGATION , 1995 .

[31]  J. Davidovits.  Geopolymers , 1991 .

[32]  R. A. Santen,et al.  Silica gel dissolution in aqueous alkali metal hydroxides studied by 29SiNMR , 1989 .

[33]  Emmanuel Joussein,et al.  In situ inorganic foams prepared from various clays at low temperature , 2011 .

[34]  Waltraud M. Kriven,et al.  Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer , 2009 .

[35]  E. Bernardo,et al.  Novel Microcellular Ceramics from a Silicone Resin , 2004 .

[36]  K. Draget,et al.  Alginate Gelation Technologies , 2004 .

[37]  S. Kanzaki,et al.  Synthesis of Porous Ceramics with Complex Pore Structure by Freeze‐Dry Processing , 2001 .

[38]  X. Zhang.  Electrochemistry of silicon and its oxide , 2001 .

[39]  V. Pandolfelli,et al.  The permeability of ceramic foams , 1999 .

[40]  P. Woditsch,et al.  Synthesis of Si3N4 powder by gas phase reaction of chlorosilanes with ammonia , 1998 .

[41]  José M.F. Ferreira,et al.  Processing of porous ceramics by ‘starch consolidation’ , 1998 .

[42]  R. Rice.  Evaluation and extension of physical property-porosity models based on minimum solid area , 1996 .

[43]  C. Scott,et al.  Processing of porous ceramics , 1992 .

[44]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[45]  Lesile Glasser.  The chemistry of silica: By Ralph K. Iller. Pp. vii+ 866. Wiley, Chichester. 1979, £39.50 , 1980 .

[46]  W. D. Kingery,et al.  Introduction to Ceramics , 1976 .