Underwater femtosecond laser micromachining of thin nitinol tubes for medical coronary stent manufacture

[1]  Wei Wang,et al.  CO2 laser underwater machining of deep cavities in alumina , 2011 .

[2]  J. Kaakkunen,et al.  Water-Assisted Femtosecond Laser Pulse Ablation of High Aspect Ratio Holes , 2011 .

[3]  David Whitehead,et al.  Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications , 2010 .

[4]  S. Barcikowski,et al.  Pulsed Nd:YAG laser cutting of NiTi shape memory alloys—Influence of process parameters , 2010 .

[5]  Jun Wang,et al.  A Comparison of Dry and Underwater Laser Micromachining of Silicon Substrates , 2010 .

[6]  Cheng-Hsiang Lin,et al.  Femtosecond laser-induced silicon surface morphology in water confinement , 2009 .

[7]  Jianhong Liao,et al.  Laser micro-processing of cardiovascular stent with fiber laser cutting system , 2009 .

[8]  Ran An,et al.  Water-assisted femtosecond laser machining of electrospray nozzles on glass microfluidic devices. , 2008, Optics express.

[9]  A. Vogel,et al.  Stress wave emission and cavitation bubble dynamics by nanosecond optical breakdown in a tissue phantom , 2006, Journal of Fluid Mechanics.

[10]  Generation of debris in the femtosecond laser machining of a silicon substrate , 2005 .

[11]  Weiping Liu,et al.  Application of fiber laser used in the field of stent cutting and micromachining , 2005, SPIE/COS Photonics Asia.

[12]  D. Kothwala,et al.  Development and assessment of 316LVM cardiovascular stents , 2004 .

[13]  Jörg Krüger,et al.  Femtosecond laser interaction with silicon under water confinement , 2004 .

[14]  R. Komanduri,et al.  Micromachining of silicon by short-pulse laser ablation in air and under water , 2004 .

[15]  A. Kruusing.  Underwater and water-assisted laser processing: Part 2—Etching, cutting and rarely used methods , 2004 .

[16]  Arvi Kruusing,et al.  Underwater and water-assisted laser processing: Part 1-general features, steam cleaning and shock processing [review article] , 2004 .

[17]  Lin Li,et al.  Chemical Assisted Laser Machining for The Minimisation of Recast and Heat Affected Zone , 2004 .

[18]  Lin Li,et al.  Spatter prevention during the laser drilling of selected aerospace materials , 2003 .

[19]  G. Lim,et al.  Studies of Femtosecond Laser-Processed Nitinol , 2003 .

[20]  Etsuji Ohmura,et al.  Scattering of evaporation particles in ultrashort-pulse laser ablation , 2002, International Symposium on Laser Precision Microfabrication.

[21]  Electromagnetic heating of a shape memory alloy translator , 1996 .

[22]  Gerard Mourou,et al.  Laser‐induced breakdown by impact ionization in SiO2 with pulse widths from 7 ns to 150 fs , 1994 .

[23]  P. Ballard,et al.  Physical study of laser-produced plasma in confined geometry , 1990 .

[24]  K. Baker,et al.  Optical properties of the clearest natural waters (200-800 nm). , 1981, Applied optics.