Form-finding and shape optimization of bio-inspired branching structures based on graphic statics

Abstract Structure’s internal force transfer efficiency is the bases of pursuing the creative structural form. This paper reveals the mechanical mechanisms of the bio-inspired branching structures and further presents a numerical form-finding and shape optimization method for bio-inspired branching structures based on graphic statics with the constraints of strength, stiffness of boundary conditions are considered. Efficient structural form is obtained by connecting the internal force equilibrium and the structural performance in designing process. The reciprocal diagrams in graphic statics are used to solve the form-finding problem to generate compression or tension-only tree-like structure. Establishing the formula of the evaluation criteria of internal force transfer efficiency to characterize the structural performances, the criteria is compared with the continuum topology optimization method, the shape of tree-like structure is optimized by maximizing the structural efficiency under static loads. As a result, suitable external constraints can make a structure efficient and improve the structural redundancy, material properties determine the structural form, which in turn affects the structural behavior. Consequently, the interrelation mechanisms between material-property, structural-form, and structure-performance of the highly efficient bio-inspired branching structures are found. The internal force transfer efficiency and the strength and stiffness of boundary condition are the main factors to determine the optimal solution in the topological design exploration of load-bearing structure, these factors could be controlled to obtain the effective and elegant structural form for practical fabrication. The proposed numerical method could provide intuitive understanding and real-time feedback for the optimal solution, avoid the single solution obtained by the conventional optimization techniques and limited control to modify the output topology. Besides, more structural performance (e.g. buckling, vibration) can be considered in the structural designing process.

[2]  Philippe Block,et al.  On the equilibrium of funicular polyhedral frames and convex polyhedral force diagrams , 2015, Comput. Aided Des..

[3]  Masoud Akbarzadeh,et al.  Graphic statics in a continuum: Strut-and-tie models for reinforced concrete , 2020 .

[4]  Andrew Liew,et al.  Structural design, digital fabrication and construction of the cable-net and knitted formwork of the KnitCandela concrete shell , 2020, Structures.

[5]  Mohammad Bolhassani,et al.  On Structural Behavior of a Funicular Concrete Polyhedral Frame Designed by 3D Graphic Statics , 2018, Structures.

[6]  Mario Sassone,et al.  Tree-inspired dendriforms and fractal-like branching structures in architecture: A brief historical overview , 2014 .

[8]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[9]  J. Maxwell,et al.  XLV. On reciprocal figures and diagrams of forces , 1864 .

[10]  Yi Min Xie,et al.  On the internal architecture of emergent plants , 2018, Journal of the Mechanics and Physics of Solids.

[11]  Philippe Block,et al.  Exploring Form and Forces: Graphic Statics in the Digital Age , 2017 .

[12]  Bedrich Benes,et al.  Clever Support: Efficient Support Structure Generation for Digital Fabrication , 2014, Comput. Graph. Forum.

[13]  Yi Guo,et al.  Algebraic 3D graphic statics: Reciprocal constructions , 2019, Comput. Aided Des..

[14]  Allan McRobie,et al.  Polarities in structural analysis and design: n-dimensional graphic statics and structural transformations , 2018, International Journal of Solids and Structures.

[15]  Ole Sigmund,et al.  Topology optimization: a tool for the tailoring of structures and materials , 2000, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[16]  Philippe Block,et al.  Disjointed force polyhedra , 2018, Comput. Aided Des..

[17]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[18]  Leoni Graziano,et al.  Conceptual design of a pedestrian bridge by means of topologyoptimization , 2013 .

[19]  Corentin Fivet,et al.  Graphic Statics and Interactive Optimization for Engineering Education , 2015 .

[20]  Sławomir Czarnecki,et al.  Topology optimization in structural mechanics , 2013 .

[21]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[22]  Chang-Yu Cui,et al.  A morphogenesis method for shape optimization of framed structures subject to spatial constraints , 2014 .

[23]  Corentin Fivet,et al.  A fully geometric approach for interactive constraint-based structural equilibrium design , 2015, Comput. Aided Des..

[24]  Yi Min Xie,et al.  A further review of ESO type methods for topology optimization , 2010 .

[25]  Ying Liu,et al.  Self-supporting structure design in additive manufacturing through explicit topology optimization , 2017 .

[26]  Corentin Fivet,et al.  Automatic generation of diverse equilibrium structures through shape grammars and graphic statics , 2016 .

[27]  Allan McRobie,et al.  The geometry of structural equilibrium , 2017, Royal Society Open Science.

[28]  George I. N. Rozvany,et al.  Topology optimization in structural and continuum mechanics , 2014 .

[29]  Xiaoping Qian,et al.  Topology optimization of self-supporting support structures for additive manufacturing , 2018 .

[30]  Lauren L. Beghini,et al.  Maxwell’s reciprocal diagrams and discrete Michell frames , 2013 .

[31]  Joseph Schwartz,et al.  Vector-based 3D graphic statics: A framework for the design of spatial structures based on the relation between form and forces , 2019, International Journal of Solids and Structures.

[32]  Hao Zheng,et al.  Machine learning assisted evaluations in structural design and construction , 2020 .

[33]  Corentin Fivet,et al.  Constraint-Based Graphic Statics : New paradigms of computer-aided structural equilibrium design , 2013 .

[34]  W. J. Macquorn Rankine,et al.  XVII. Principle of the equilibrium of polyhedral frames , 1864 .

[35]  Lauren L. Beghini,et al.  Structural optimization using graphic statics , 2014 .

[36]  Patrick Ole Ohlbrock,et al.  A Computer-Aided Approach to Equilibrium Design Based on Graphic Statics and Combinatorial Variations , 2020, Comput. Aided Des..

[37]  Waclaw Zalewski,et al.  Shaping Structures: Statics , 1997 .

[38]  A. Michell.  LVIII. The limits of economy of material in frame-structures , 1904 .

[39]  Philippe Block,et al.  THRUST NETWORK ANALYSIS : A NEW METHODOLOGY FOR THREE-DIMENSIONAL EQUILIBRIUM , 2007 .

[40]  Lee Cunningham,et al.  An insight into structural design against deflection , 2018 .

[41]  Werner Sobek,et al.  A DESIGN TOOL FOR SPATIAL TREE STRUCTURES , 2009 .

[42]  Philippe Block,et al.  Compression-only Form finding through Finite Subdivision of the Force Polygon , 2014 .

[43]  Philippe Block,et al.  GEOMETRY-BASED UNDERSTANDING OF STRUCTURES , 2012 .