Design of mechanisms for cooperation among multiple position-controlled robots

This paper proposes a strategy for handling a single object by cooperation of multiple robots controlled by PID position controllers. Since such a cooperative system has mechanical closed loops, installation of free joints or flexibility among robots is necessary to avoid excessive inner forces caused by the positioning error of each robot. First, the essential kinematic conditions to achieve the cooperation among position-controlled robots are shown. Second, the relationship between the positioning error of the handling object and that of each robot is analyzed. Finally, a mechanism for the cooperation of three mobile robots is proposed and its kinematic characteristics and statics are analyzed. The strategy proposed here is very effective and practical for cooperation of not only conventional industrial robots but also distributed autonomous mobile robot systems with non-holonomic constraints.<<ETX>>

[1]  Tzyh Jong Tarn,et al.  Event-based planning and control for multi-robot coordination , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[2]  William A. Gruver,et al.  Fingertip force planning for multifingered robot hands , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[3]  Masafumi Hashimoto,et al.  Dynamic control approach for motion coordination of multiple wheeled mobile robots transporting a single object , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[4]  Yoshihiko Nakamura,et al.  A computational scheme of closed link robot dynamics derived by D'Alembert principle , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[5]  Hisashi Osumi,et al.  Crane Control System with an Industrial Robot , 1988 .

[6]  H. Makino,et al.  Assembly of Suspended Heavy Works , 1990 .

[7]  Masaru Uchiyama,et al.  A symmetric hybrid position/force control scheme for the coordination of two robots , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[8]  Kazuhiro Kosuge,et al.  Control of single-master multi-slave manipulator system using VIM , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[9]  Suguru Arimoto,et al.  Cooperative motion control of multiple robot arms or fingers , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[10]  Eiichi Yoshida,et al.  Cooperative control between multiple manipulators with flexibility , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[11]  Shaheen Ahmad,et al.  Dynamic coordination of dual-arm robotic systems with joint flexibility , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[12]  Andrew A. Goldenberg,et al.  Dynamic control of multiple coordinated redundant manipulators with torque optimization , 1990, Proceedings., IEEE International Conference on Robotics and Automation.