A Review on the Fabrication Techniques of Functionally Graded Ceramic-Metallic Materials in Advanced Composites
暂无分享,去创建一个
Faizal Mustapha | Dewan Muhammad Nuruzzaman | S. Basri | D. M. Nuruzzaman | S. Basri | F. Mustapha | Siti Nur Sakinah Jamaludin | S. Jamaludin
[1] D. L. Majid,et al. Fabrication of functionally graded Hydroxyapatite-Titanium by applying optimal sintering procedure and powder metallurgy , 2011 .
[2] Jingchuan Zhu,et al. In vivo study on biocompatibility and bonding strength of Ti/Ti–20 vol.% HA/Ti–40 vol.% HA functionally graded biomaterial with bone tissues in the rabbit , 2006 .
[3] Dominique Grevey,et al. Laser-assisted direct manufacturing of functionally graded 3D objects , 2003, Other Conferences.
[4] V. E. Beal,et al. Process optimization for PA12/MWCNT nanocomposite manufacturing by selective laser sintering , 2013 .
[5] P. Kwon,et al. Fabrication of alumina/zirconia functionally graded material : From optimization of processing parameters to phenomenological constitutive models , 2008 .
[6] Kehe Su,et al. Evaluation of the Thermodynamic Data of CH3SiCl3 Based on Quantum Chemistry Calculations , 2006 .
[7] M. Bram,et al. Preparation of TiO2 composite microfiltration membranes by the wet powder spraying method , 2004 .
[8] Hugh Alan Bruck,et al. Pressureless sintering of particle-reinforced metal–ceramic composites for functionally graded materials: Part I. Porosity reduction models , 2006 .
[9] A. Kawasaki,et al. Thermal fracture behavior of metal/ceramic functionally graded materials , 2002 .
[10] Jong-Bong Park,et al. Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites , 2005 .
[11] Wook-Jin Lee,et al. FABRICATION AND RESIDUAL STRESS CHARACTERIZATION OF SQUEEZE INFILTRATED Al18B4O33/Mg FUNCTIONALLY GRADED MATERIAL , 2009 .
[12] F. Bülbül,et al. The effect of TiC transient layer on a DLC-based functionally gradient coating prepared by closed field unbalanced magnetron sputtering plating system , 2010 .
[13] Xierong Zeng,et al. Fabrication and thermal properties of a YSZ-NiCr joint with an interlayer of YSZ-NiCr functionally graded material , 2003 .
[14] Neil Hopkinson,et al. The effect of scanning strategy on laser fusion of functionally graded H13/Cu materials , 2006 .
[15] R. C. Prasad,et al. Laser rapid manufacturing of bi-metallic tube with Stellite-21 and austenitic stainless steel , 2009 .
[16] B. Kieback,et al. Processing techniques for functionally graded materials , 2003 .
[17] R. Chona,et al. A Review of Dynamic Fracture Studies in Functionally Graded Materials , 2007 .
[18] H. Hassanin,et al. Infiltration-processed, functionally graded materials for microceramic componenets , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).
[19] Jingfeng Li,et al. Fabrication and characteristics of plasma facing SiC/C functionally graded composite material , 2005 .
[20] Motohiro Uo,et al. Development of Functionally Graded Implant and Dental Post for Bio-Medical Application , 2003 .
[21] J. Y. Park,et al. C/SiC Multilayer Coating for the Oxidation Resistance of C-C Composite by Low Pressure Chemical Vapor Deposition , 2003 .
[22] B. C. Pai,et al. Formation of solidification microstructures in centrifugal cast functionally graded aluminium composites , 2009 .
[23] T. Elperin,et al. “Thermal Mirror” Method for Measuring Physical Properties of Multilayered Coatings , 2007 .
[24] Xue-Qi Liu,et al. Epoxy resin/polyurethane functionally graded material prepared by microwave irradiation , 2004 .
[25] B. Kiebacka,et al. Processing techniques for functionally graded materials , 2003 .
[26] T. Marcelo,et al. Microstructural characterization and interactions in Ti- and TiH2-hydroxyapatite vacuum sintered composites , 2006 .
[27] Q. Shen,et al. Calculation of Tape Thickness for Ceramic Tape Casting , 2012 .
[28] S. Kumar,et al. Laser assisted rapid manufacturing technique for the manufacturing of functionally graded materials , 2012, 2012 Students Conference on Engineering and Systems.
[29] J. Lannutti. Functionally graded materials: Properties, potential and design guidelines , 1994 .
[30] M. Eriksson,et al. Spark plasma sintering of WC, cemented carbide and functional graded materials , 2013 .
[31] G. Salazar-Alvarez,et al. Cold Consolidation of Metal–Ceramic Nanocomposite Powders with Large Ceramic Fractions , 2008 .
[32] G. Messing,et al. Constrained Densification of Alumina/Zirconia Hybrid Laminates, I: Experimental Observations of Processing Defects , 2005 .
[33] K. Cho,et al. Thermal Properties and Fracture Behavior of Compositionally Graded Al-SiCp Composites , 2004 .
[34] V. Khatkar,et al. Synthesis and characterization of in-situ reinforced Fe-TiC steel FGMs , 2008 .
[35] A. Sola,et al. Cobalt doped glass for the fabrication of percolated glass–alumina functionally graded materials , 2008 .
[36] Hongzhi Wang,et al. Electrochemical preparation and characterization of Ni/SiC gradient deposit , 2004 .
[37] Z. Zhong,et al. Performance of W/Cu FGM based plasma facing components under high heat load test , 2007 .
[38] Characteristics of structure and properties of a sintered graded tool materials with cobalt matrix , 2007 .
[39] Motohiro Uo,et al. Fabrication and properties of functionally graded dental implant , 1997 .
[40] K. Kim,et al. Fabrication and Mechanical Properties of Porous Ti/HA Composites for Bone Fixation Devices , 2010 .
[41] P. Fajfar,et al. Thermal Fatigue Testing of Bulk Functionally Graded Materials , 2011 .
[42] Hugh Alan Bruck,et al. Pressureless sintering of particle-reinforced metal–ceramic composites for functionally graded materials: Part II. Sintering model , 2006 .
[43] Motohiro Uo,et al. Fabrication of Titanium Nitride/Apatite Functionally Graded Implants by Spark Plasma Sintering , 2004 .
[44] L. Martin,et al. Fabrication and Characterization of Graded Impedance Gas Gun Impactors from Tape Cast Metal Powders , 2005 .
[45] Pal Molian,et al. Functionally graded mold inserts by laser-based flexible fabrication: processing modeling, structural analysis, and performance evaluation , 2005 .
[46] P. Sarkar,et al. Synthesis and microstructural manipulation of ceramics by electrophoretic deposition , 2004 .
[47] J. Missiaen,et al. Coupling between Sintering and Liquid Migration to Process Tungsten‐Copper Functionally Graded Materials , 2010 .
[48] A. Boccaccini,et al. Electrophoretic deposition: fundamentals and applications. , 2010, The journal of physical chemistry. B.
[49] Weiqi Wang,et al. Fabrication of ZrO2-SUS Functionally Graded Materials by Slip Casting , 2008 .
[50] Yoshimi Watanabe,et al. A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method , 2009, Materials.
[51] C. Moreau,et al. Mechanical Behavior of Air Plasma-Sprayed YSZ Functionally Graded Mullite Coatings Investigated via Instrumented Indentation , 2011 .
[52] D. Soares,et al. Optimization of bond strength between gold alloy and porcelain through a composite interlayer obtained by powder metallurgy , 2011 .
[53] Kamran Mumtaz,et al. Laser melting functionally graded composition of Waspaloy® and Zirconia powders , 2007 .
[54] I. Kim,et al. Microstructures of functionally graded materials fabricated by centrifugal solid-particle andin-situ methods , 2005 .
[55] M. Kim,et al. Evaluation of functionally graded thermal barrier coatings fabricated by detonation gun spray technique , 2003 .
[56] M. Schwartz. Encyclopedia of smart materials , 2002 .