A comparison of critical shear force in low-voltage, all-polymer electroadhesives to a basic friction model

Elastomer-based electroadhesion can be an effective method to provide tunable adhesion between robots and grasped objects or surfaces. However, there has been little work to develop models of electroadhesion and characterization of adhesive performance relative to these models. In this paper, a basic friction model is proposed to describe the critical shear force for a single electrode electroadhesive fabricated from conductive PDMS encased in parylene. The use of parylene results in thin dielectrics that require only 10s of Volts to achieve shear pressures greater than 100 kPa. The experimental results gathered by characterizing voltage, dielectric thickness, adhesive area, and adhesive thickness follow the trends predicted by theory with some important deviations that are studied using high speed video capture of the soft adhesive failure.

[1]  Metin Sitti,et al.  Fiberbot: A miniature crawling robot using a directional fibrillar pad , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[2]  Abel L. Thangawng,et al.  An ultra-thin PDMS membrane as a bio/micro–nano interface: fabrication and characterization , 2007, Biomedical microdevices.

[3]  Huanyu Cheng,et al.  Elastomer Surfaces with Directionally Dependent Adhesion Strength and Their Use in Transfer Printing with Continuous Roll‐to‐Roll Applications , 2012, Advanced materials.

[4]  Jeonghoon Yoo,et al.  Finite element analysis of the attractive force on a Coulomb type electrostatic chuck , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[5]  Markus Eich,et al.  Design and control of a lightweight magnetic climbing robot for vessel inspection , 2011, 2011 19th Mediterranean Conference on Control & Automation (MED).

[6]  Mark R. Cutkosky,et al.  μTugs: Enabling microrobots to deliver macro forces with controllable adhesives , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[7]  R. Wood,et al.  Perching and takeoff of a robotic insect on overhangs using switchable electrostatic adhesion , 2016, Science.

[8]  Rui Chen,et al.  Modeling of attraction force generated by interdigital electrodes for electroadhesive robots , 2012, IEEE 10th International Conference on Industrial Informatics.

[9]  Rui Chen,et al.  A Gecko-Inspired Electroadhesive Wall-Climbing Robot , 2015, IEEE Potentials.

[10]  Werner Brockmann,et al.  Concept for Energy-autarkic, Autonomous Climbing Robots , 2005, CLAWAR.

[11]  S. Bergbreiter,et al.  HIGH STRENGTH, LOW VOLTAGE MICROFABRICATED ELECTROADHESIVES ON NON-CONDUCTIVE SURFACES , 2014 .

[12]  Duncan J. Irschick,et al.  Looking Beyond Fibrillar Features to Scale Gecko‐Like Adhesion , 2012, Advanced materials.

[13]  Daniel R. King,et al.  Creating Gecko‐Like Adhesives for “Real World” Surfaces , 2014, Advanced materials.

[14]  Metin Sitti,et al.  Effect of backing layer thickness on adhesion of single-level elastomer fiber arrays , 2007 .

[15]  Metin Sitti,et al.  Geckobot: a gecko inspired climbing robot using elastomer adhesives , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[16]  S. Bergbreiter,et al.  Friction, adhesion, and wear properties of PDMS coatings in MEMS devices , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[17]  Francesco Mondada,et al.  TRIPILLAR: a miniature magnetic caterpillar climbing robot with plane transition ability1 , 2011, Robotica.

[18]  K. Autumn,et al.  Mechanisms of Adhesion in Geckos1 , 2002, Integrative and comparative biology.

[19]  L. Léger,et al.  Adhesion mechanisms at soft polymer interfaces , 2008, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[20]  Roy Kornbluh,et al.  Electroadhesive robots—wall climbing robots enabled by a novel, robust, and electrically controllable adhesion technology , 2008, 2008 IEEE International Conference on Robotics and Automation.

[21]  Metin Sitti,et al.  Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives , 2011, Int. J. Robotics Res..

[22]  Michael D. Bartlett,et al.  Scaling normal adhesion force capacity with a generalized parameter. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[23]  Marleen Kamperman,et al.  Functional Adhesive Surfaces with “Gecko” Effect: The Concept of Contact Splitting , 2010 .

[24]  B. Newby,et al.  Friction in adhesion , 1998 .

[25]  J.K. Tar,et al.  A Survey of Technologies for Climbing Robots Adhesion to Surfaces , 2008, 2008 IEEE International Conference on Computational Cybernetics.

[26]  Dario Floreano,et al.  Stretchable electroadhesion for soft robots , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[27]  Carlo Menon,et al.  Characterization of electro-adhesives for robotic applications , 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

[28]  Sarah Bergbreiter,et al.  Dielectric breakdown of PDMS thin films , 2013 .

[29]  G. A. Wardly,et al.  Electrostatic Wafer Chuck for Electron Beam Microfabrication , 1973 .

[30]  S. Bergbreiter,et al.  A novel all-elastomer MEMS tactile sensor for high dynamic range shear and normal force sensing , 2015 .

[31]  D. Floreano,et al.  Versatile Soft Grippers with Intrinsic Electroadhesion Based on Multifunctional Polymer Actuators , 2016, Advanced materials.

[32]  Akio Yamamoto,et al.  Electrostatic-motor-driven electroadhesive robot , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[33]  Alfred J. Crosby,et al.  Designing Bio‐Inspired Adhesives for Shear Loading: From Simple Structures to Complex Patterns , 2012 .

[34]  Metin Sitti,et al.  Soft Grippers Using Micro‐fibrillar Adhesives for Transfer Printing , 2014, Advanced materials.

[35]  M. Spenko,et al.  Optimization of Electrostatic Adhesives for Robotic Climbing and Manipulation , 2012 .

[36]  Donald Ruffatto,et al.  Improving controllable adhesion on both rough and smooth surfaces with a hybrid electrostatic/gecko-like adhesive , 2014, Journal of The Royal Society Interface.

[37]  Yoshihide Fukahori,et al.  Mechanism of rubber abrasion: Part 2. General rule in abrasion pattern formation in rubber-like materials , 1994 .

[38]  M. Barquins.  Sliding friction of rubber and Schallamach waves: a review , 1985 .

[39]  Dikai Liu,et al.  Design of a high capacity Electro Permanent Magnetic adhesion for climbing robots , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[40]  J. Chousal,et al.  Effect of Adhesive Type and Thickness on the Lap Shear Strength , 2006 .

[41]  Ronald S Fearing,et al.  Shear adhesion strength of thermoplastic gecko-inspired synthetic adhesive exceeds material limits. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[42]  G. J. Lake,et al.  Wave Phenomena in Low Angle Peeling , 1981 .

[43]  Carlos Balaguer,et al.  ADAPTIVE CONTROL STRATEGY OF CLIMBING ROBOT FOR INSPECTION APPLICATIONS IN CONSTRUCTION INDUSTRY , 2002 .

[44]  Kazutoshi Asano,et al.  Fundamental study of an electrostatic chuck for silicon wafer handling , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[45]  A. Crosby,et al.  Deformation and Failure Modes of Adhesively Bonded Elastic Layers , 2000 .

[46]  A. D. Crocombe,et al.  Global yielding as a failure criterion for bonded joints , 1989 .