Optimization of friction stir welding for various tool pin geometries: the weldability of Polyamide 6 plates made of material extrusion additive manufacturing

[1]  S. S,et al.  Strategized Friction Stir Welded AA6061-T6/SiC Composite Lap Joint Suitable for Sheet Metal Applications , 2022, Journal of Materials Research and Technology.

[2]  K. Jayakumar,et al.  Effect of tool pin shapes on microstructure and mechanical behaviour of friction stir welding of dissimilar aluminium alloys , 2022, Materials Today: Proceedings.

[3]  A. Setiawan,et al.  Effect of friction stir welding parameters on corrosion behaviour of aluminium alloys: An overview , 2022, Corrosion Engineering, Science and Technology.

[4]  S. Singhal,et al.  Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy , 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

[5]  M. Ruban,et al.  Investigation of the microstructure and mechanical properties of AA6063 and AA7075 dissimilar aluminium alloys by friction stir welding process , 2022, Materials Today: Proceedings.

[6]  A. Kubit,et al.  Multi-Criteria Optimisation of Friction Stir Welding Parameters for EN AW-2024-T3 Aluminium Alloy Joints , 2022, Materials.

[7]  Vinayak R. Malik,et al.  Investigations on FSW of nylon micro-particle enhanced 3D printed parts applied to a Clark-Y UAV wing , 2022, Welding International.

[8]  N. Vidakis,et al.  Optimization of Friction Stir Welding Parameters in Hybrid Additive Manufacturing: Weldability of 3D-Printed Poly(methyl methacrylate) Plates , 2022, Journal of Manufacturing and Materials Processing.

[9]  N. Vidakis,et al.  Material extrusion 3D printing and friction stir welding: an insight into the weldability of polylactic acid plates based on a full factorial design , 2022, The International Journal of Advanced Manufacturing Technology.

[10]  M. Azadi,et al.  Fatigue testing on rotary friction-welded joints between solid ABS and 3D-printed PLA and ABS , 2022, European Journal of Mechanics - A/Solids.

[11]  N. Vidakis,et al.  Friction Stir Welding Optimization of 3D-Printed Acrylonitrile Butadiene Styrene in Hybrid Additive Manufacturing , 2022, Polymers.

[12]  E. Medeiros,et al.  Electrical nanocomposites of PA6 / ABS / ABS‐MA reinforced with carbon nanotubes ( MWCNTf ) for antistatic packaging , 2022, Polymer Composites.

[13]  F. Almaskari,et al.  Effect of process temperatures on material flow and weld quality in the friction stir welding of high density polyethylene , 2022, Journal of Materials Research and Technology.

[14]  N. Michailidis,et al.  Development and Optimization of Medical-Grade Multi-Functional Polyamide 12-Cuprous Oxide Nanocomposites with Superior Mechanical and Antibacterial Properties for Cost-Effective 3D Printing , 2022, Nanomaterials.

[15]  N. Vidakis,et al.  Parameter effects and process modelling of Polyamide 12 3D-printed parts strength and toughness , 2022, Materials and Manufacturing Processes.

[16]  Piyush,et al.  Characterization of Friction Stir-Welded Polylactic Acid/Aluminum Composite Primed through Fused Filament Fabrication , 2021, Journal of Materials Engineering and Performance.

[17]  F. Sharifi,et al.  On the role of input welding parameters on the microstructure and mechanical properties of Al6061-T6 alloy during the friction stir welding: Experimental and numerical investigation , 2021, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

[18]  A. O. Moghaddam,et al.  A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW , 2021, International Journal of Material Forming.

[19]  F. Sharifi,et al.  Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy , 2021 .

[20]  F. Sharifi,et al.  A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior , 2021, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

[21]  N. Vaxevanidis,et al.  An investigation of surface quality characteristics of 3D printed PLA plates cut by CO2 laser using experimental design , 2021 .

[22]  K. Zhou,et al.  Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion , 2021 .

[23]  A. Kokabi,et al.  Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding Conditions , 2021, Journal of Materials Engineering and Performance.

[24]  N. Vidakis,et al.  Sustainable Additive Manufacturing: Mechanical Response of Polyamide 12 over Multiple Recycling Processes , 2021, Materials.

[25]  S. Chaudhari,et al.  Modelling and optimisation of nanocoolant minimum quantity lubrication process parameters for grinding performance , 2021, International Journal of Experimental Design and Process Optimisation.

[26]  A. Vairis,et al.  On the Friction Stir Welding of Al 7075 Thin Sheets , 2020, Metals.

[27]  V. Mechtcherine,et al.  On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers , 2020, Polymers.

[28]  Rupinder Singh,et al.  Thermo-mechanical investigations for the joining of thermoplastic composite structures via friction stir spot welding , 2020 .

[29]  K. Venkatesan,et al.  Performance Analysis of Nano Silicon Carbide Reinforced Swept Friction Stir Spot Weld Joint in AA6061-T6 Alloy , 2020, Silicon.

[30]  A. Kokabi,et al.  Numerical analysis of cooling and joining speed effects on friction stir welding by smoothed particle hydrodynamics (SPH) , 2020, Archive of Applied Mechanics.

[31]  A. Kokabi,et al.  Numerical analysis of vibration effect on friction stir welding by smoothed particle hydrodynamics (SPH) , 2020, The International Journal of Advanced Manufacturing Technology.

[32]  A. S. Deshpande,et al.  Investigations on friction stir joining of 3D printed parts to overcome bed size limitation and enhance joint quality for unmanned aircraft systems , 2020 .

[33]  Yifu Shen,et al.  Friction lap welding AA6061 alloy and GFR nylon: Influence of welding parameters and groove features on joint morphology and mechanical property , 2020 .

[34]  A. Simchi,et al.  Modeling and experimental validation of material flow during FSW of polycarbonate , 2020, Materials Today Communications.

[35]  Rupinder Singh,et al.  Friction Welding for Functional Prototypes of PA6 and ABS with Al Powder Reinforcement , 2020 .

[36]  B. Bagheri,et al.  Mechanical Behavior and Microstructure of AA6061-T6 Joints Made by Friction Stir Vibration Welding , 2020, Journal of Materials Engineering and Performance.

[37]  Advances in Additive Manufacturing and Joining , 2020, Lecture Notes on Multidisciplinary Industrial Engineering.

[38]  S. Muthukumaran,et al.  Influence of process variables on the characteristics of friction‐stir‐welded polyamide 6,6 joints , 2019, Materialwissenschaft und Werkstofftechnik.

[39]  S. Muthukumaran,et al.  Optimization of Welding Process Parameters in Novel Friction Stir Welding of Polyamide 66 Joints , 2019, Materials Science Forum.

[40]  U. S. Dixit,et al.  Recent developments in friction stir welding and resulting industrial practices , 2019, Advances in Materials and Processing Technologies.

[41]  A. Paoletti,et al.  Analysis of loads, temperatures and welds morphology in FSW of polycarbonate , 2019, Journal of Materials Processing Technology.

[42]  C. Burtin,et al.  Carbon/polyamide 6 thermoplastic composite cylinders for deep sea applications , 2019, Composite Structures.

[43]  Rupinder Singh,et al.  Mechanical, thermal and micrographic investigations of friction stir welded: 3D printed melt flow compatible dissimilar thermoplastics , 2019, Journal of Manufacturing Processes.

[44]  F. Almaskari,et al.  Friction stir welding of high density polyethylene—Carbon black composite , 2019, Journal of Materials Processing Technology.

[45]  Jie Song,et al.  Tribological and mechanical properties of MoS2 enhanced polyamide 12 for selective laser sintering , 2019, Journal of Materials Processing Technology.

[46]  Rupinder Singh,et al.  Friction Stir Welding of Three-Dimensional Printed Polymer Composites with Semi-consumable Tool , 2019, Lecture Notes on Multidisciplinary Industrial Engineering.

[47]  Sunpreet Singh,et al.  On Friction-Stir Welding of 3D Printed Thermoplastics , 2019, Materials Forming, Machining and Tribology.

[48]  Qinchuan Li,et al.  Fatigue of Friction Stir Welded Aluminum Alloy Joints: A Review , 2018, Applied Sciences.

[49]  K. Venkatesan,et al.  Influence of SiC Nanoparticle Reinforcement on FSS Welded 6061-T6 Aluminum Alloy , 2018, Journal of Nanomaterials.

[50]  M. Elyasi,et al.  Experimental and thermomechanical study on FSW of PMMA polymer T-joint , 2018 .

[51]  Rupinder Singh,et al.  Weldability of thermoplastic materials for friction stir welding- A state of art review and future applications , 2018 .

[52]  V. Kannan,et al.  Friction Stir Welding of Aluminium Alloys , 2017 .

[53]  Hui He,et al.  Preparation of a new filament based on polyamide‐6 for three‐dimensional printing , 2017 .

[54]  S. Muthukumaran,et al.  Effect of Welding Parameters on Microstructure and Tensile Strength of Friction Stir Welded PA 6,6 Joints , 2017 .

[55]  Yifu Shen,et al.  Application and exploration of friction stir welding/processing in plastics industry , 2017 .

[56]  A. Arora,et al.  An assisted heating tool design for FSW of thermoplastics , 2017 .

[57]  Markos Petousis,et al.  Effect of the Tool Rotational Speed on the Mechanical Properties of Thin AA1050 Friction Stir Welded Sheets , 2016 .

[58]  G. Kanagaraj,et al.  Evaluation of mechanical properties and characterization of silicon carbide–reinforced polyamide 6 polymer composites and their engineering applications , 2016 .

[59]  M. Awang,et al.  Investigating Friction Stir Welding on Thick Nylon 6 Plates Exploring the effects of rotational speed on micromechanical properties , flow behavior , and thermal variations , 2016 .

[60]  M. Razfar,et al.  Finite element simulation and experimental investigation of friction stir processing of Polyamide 6 , 2015 .

[61]  Taher Azdast,et al.  Mechanical properties of friction-stir-welded polyamide sheets , 2015, International Journal of Mechanical and Materials Engineering.

[62]  H. Kokawa,et al.  Effect of Welding Temperature on Microstructure of Friction-stir Welded Aluminum Alloy 1050 , 2015, Metallurgical and Materials Transactions A.

[63]  M. Razfar,et al.  Numerical and experimental investigation of FSP of PA 6/MWCNT composite , 2014 .

[64]  Ayse Aytac,et al.  Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites , 2013 .

[65]  S. Bourbigot,et al.  New routes to flame retard polyamide 6,6 for electrical applications , 2012 .

[66]  Chi-Hui Chien,et al.  Optimal FSW process parameters for aluminum alloys AA5083 , 2011 .

[67]  S. W. Kallee,et al.  Industrial applications of friction stir welding , 2010 .

[68]  T. Sakthivel,et al.  Effect of welding speed on microstructure and mechanical properties of friction-stir-welded aluminum , 2009 .

[69]  J. Eguiazábal,et al.  Effects of reprocessing on the structure and properties of polyamide 6 nanocomposites , 2008 .

[70]  Jia-Horng Lin,et al.  Influence of reprocessing on the mechanical properties and structure of polyamide 6 , 2007 .

[71]  P. Mahadevan,et al.  An overview , 2007, Journal of Biosciences.

[72]  Hidetoshi Fujii,et al.  Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys , 2006 .

[73]  C. Friedrich,et al.  Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene , 2004 .

[74]  Nikolaos Bilalis,et al.  Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 2: The Effect of Cutting Parameters on the Level of Tool Stresses—A Quantitative Parametric Analysis , 2002 .

[75]  Birgit Skrotzki,et al.  Characterization of a friction-stir-welded aluminum alloy 6013 , 2002 .