Influence of geometrical factors on the behavior of lumbar spine segments: A finite element analysis

SummaryThe main objective of this study was the assessment of the influence of geometrical factors on the behavior of lumbar segments. To this end, a three-dimensional, parameterized, finite element model of the lumbar spine was used, and the results were compared with in-house experimental results and with the few published experimental results available concerning either the geometry of the tested samples or the differences observed at different vertebral levels. Furthermore, in order to appreciate the relative importance of the geometry, the influence of the variation of some other parameters was studied, such as the orientation of the facet joints, the gap between the articular processes, and the Young's modulus of the disk fibers. As a first approach, a series of computations was carried out in order to evaluate the role of geometry in the mechanical behavior differences observed at different levels. It has been found that geometrical factors do exert a noticeable influence on the behavior of the spine, especially those which interfere with the dimensions of the intervertebral disk.

[1]  Y. E. Kim,et al.  An Analytical Investigation of the Mechanics of Spinal Instrumentation , 1988, Spine.

[2]  J. Laredo,et al.  Automated Percutaneous Lumbar Discectomy Versus Chemonucleolysis in the Treatment of Sciatica: A Randomized Multicenter Trial , 1993, Spine.

[3]  K. Markolf,et al.  The structural components of the intervertebral disc. A study of their contributions to the ability of the disc to withstand compressive forces. , 1974, The Journal of bone and joint surgery. American volume.

[4]  B Latimer,et al.  Vertebral Body and Posterior Element Morphology: The Normal Spine in Middle Life , 1988, Spine.

[5]  J Dubousset,et al.  A Biomechanical Analysis of Short Segment Spinal Fixation Using a Three-Dimensional Geometric and Mechanical Model , 1993, Spine.

[6]  A. M. Ahmed,et al.  The Effect of Facet Geometry on the Axial Torque‐Rotation Response of Lumbar Motion Segments , 1990, Spine.

[7]  A. Nachemson,et al.  Some mechanical properties of the third human lumbar interlaminar ligament (ligamentum flavum). , 1968, Journal of biomechanics.

[8]  M. Panjabi,et al.  How Does Posture Affect Coupling in the Lumbar Spine? , 1989, Spine.

[9]  A Shirazi-Adl,et al.  Mechanical Response of a Lumbar Motion Segment in Axial Torque Alone and Combined with Compression , 1986, Spine.

[10]  A. M. Ahmed,et al.  Some static mechanical properties of the lumbar intervertebral joint, intact and injured. , 1982, Journal of biomechanical engineering.

[11]  F Lavaste,et al.  Three-dimensional geometrical and mechanical modelling of the lumbar spine. , 1992, Journal of biomechanics.

[12]  H. Farfan,et al.  The effects of torsion on the lumbar intervertebral joints: the role of torsion in the production of disc degeneration. , 1970, The Journal of bone and joint surgery. American volume.

[13]  R. Brand,et al.  Three-dimensional flexibility and stiffness properties of the human thoracic spine. , 1976, Journal of biomechanics.

[14]  M Guillot,et al.  Biomechanical properties of spinal ligaments and a histological study of the supraspinal ligament in traction. , 1985, Journal of biomechanics.

[15]  K. Markolf.  Deformation of the thoracolumbar intervertebral joints in response to external loads: a biomechanical study using autopsy material. , 1972, The Journal of bone and joint surgery. American volume.

[16]  Y K Liu,et al.  A three-dimensional nonlinear finite element model of lumbar intervertebral joint in torsion. , 1987, Journal of biomechanical engineering.

[17]  A. M. Ahmed,et al.  Stress analysis of the lumbar disc-body unit in compression. A three-dimensional nonlinear finite element study. , 1984, Spine.