Vacuum-assisted bilayer PEDOT:PSS/cellulose nanofiber composite film for self-standing, flexible, conductive electrodes.

Sustainable cellulose nanofiber (CNF)-based composites as functional conductive materials have garnered considerable attention recently for their use in soft electronic devices. In this work, self-standing, highly flexible, and conductive PEDOT:PSS-CNF composite films were developed using a simple vacuum-assisted filtration method. Two different composite films were successfully fabricated and then tested: 1) a single-layer composite composed of a mixture of PEDOT:PSS and CNF phases and 2) a bilayer composite composed of an upper PEDOT:PSS membrane layer and a CNF matrix sub-layer. The latter composite was constructed by electrostatic/hydrogen bonding interactions between PEDOT:PSS and CNFs coupled with sequential vacuum-assisted filtration. Our results demonstrated that the resultant bilayer composite film exhibited a competitive electrical conductivity (ca. 22.6Scm-1) compared to those of previously reported cellulose-based composites. Furthermore, decreases in the electrical properties were not observed in the composite films when they were bent up to 100 times at an angle of 180° and bent multiple times at an angle of 90°, clearly demonstrating their excellent mechanical flexibility. This study provides a straightforward method of fabricating highly flexible, lightweight, and conductive films, which have the potential to be used in high-performance soft electronic systems.

[1]  D. Hon.  Cellulose: a random walk along its historical path , 1994 .

[2]  M. Kumar,et al.  Fluorescent carbon nanodots for targeted in vitro cancer cell imaging , 2016 .

[3]  C. Rodríguez-Abreu,et al.  Nanocellulose properties and applications in colloids and interfaces , 2014 .

[4]  Isidro Cruz-Cruz,et al.  Enhancement of the Electrical Conductivity in PEDOT:PSS Films by the Addition of Dimethyl Sulfate , 2010 .

[5]  O. S. Kushwaha,et al.  Polymer Solar Cells: An Overview , 2013 .

[6]  Lain‐Jong Li,et al.  Enhanced thermoelectric performance of PEDOT:PSS flexible bulky papers by treatment with secondary dopants. , 2015, ACS applied materials & interfaces.

[7]  Eunkyoung Kim,et al.  Solution Processable and Patternable Poly(3,4‐alkylenedioxythiophene)s for Large‐Area Electrochromic Films , 2011, Advanced materials.

[8]  Shayan Seyedin,et al.  High-Performance Flexible All-Solid-State Supercapacitor from Large Free-Standing Graphene-PEDOT/PSS Films , 2015, Scientific Reports.

[9]  Meng Wang,et al.  Facile Template Synthesis of Microfibrillated Cellulose/Polypyrrole/Silver Nanoparticles Hybrid Aerogels with Electrical Conductive and Pressure Responsive Properties , 2015 .

[10]  O. S. Kushwaha,et al.  Preparation and characterization of self-photostabilizing UV-durable bionanocomposite membranes for outdoor applications. , 2015, Carbohydrate polymers.

[11]  E. Togawa,et al.  Synthesis of Polyaniline (PANI) in Nano-Reaction Field of Cellulose Nanofiber (CNF), and Carbonization , 2016, Polymers.

[12]  Hidenori Okuzaki,et al.  Plastic Electronic Devices Through Line Patterning of Conducting Polymers , 2005 .

[13]  Shengli Zhang,et al.  Could Borophene Be Used as a Promising Anode Material for High-Performance Lithium Ion Battery? , 2016, ACS applied materials & interfaces.

[14]  S. Khan,et al.  Bacterial cellulose-poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) composites for optoelectronic applications. , 2015, Carbohydrate polymers.

[15]  Zhangqi Feng,et al.  Three-Dimensional BC/PEDOT Composite Nanofibers with High Performance for Electrode-Cell Interface. , 2015, ACS applied materials & interfaces.

[16]  Zhijun Shi,et al.  Nanocellulose electroconductive composites. , 2013, Nanoscale.

[17]  Jang‐Joo Kim,et al.  High-Performance Flexible Organic Light-Emitting Diodes Using Amorphous Indium Zinc Oxide Anode , 2007 .

[18]  Canhui Lu,et al.  Dialysis-Free and in Situ Doping Synthesis of Polypyrrole@Cellulose Nanowhiskers Nanohybrid for Preparation of Conductive Nanocomposites with Enhanced Properties , 2015 .

[19]  Dagang Li,et al.  A three-dimensionally chitin nanofiber/carbon nanotube hydrogel network for foldable conductive paper. , 2015, Carbohydrate polymers.

[20]  Xianjie Liu,et al.  An Organic Mixed Ion–Electron Conductor for Power Electronics , 2015, Advanced science.

[21]  Zunli Mo,et al.  Ultrasonic preparation of cellulose/Ag/polyaniline conductive composites and its electrical properties , 2015, Journal of Materials Science: Materials in Electronics.

[22]  Hongzhi Wang,et al.  Origami-inspired active graphene-based paper for programmable instant self-folding walking devices , 2015, Science Advances.

[23]  Zhiqiang Fang,et al.  Biodegradable transparent substrates for flexible organic-light-emitting diodes , 2013 .

[24]  Selective Depolymerization of Cellulose to Low Molecular Weight Cello-Oligomers Catalyzed by Betaïne Hydrochloride , 2014 .

[25]  D. Hansell,et al.  The Impact of Homogeneous Versus Heterogeneous Emphysema on Dynamic Hyperinflation in Patients With Severe COPD Assessed for Lung Volume Reduction , 2015, COPD.

[26]  P. van der Schoot,et al.  Cellulose Nanowhiskers Templating in Conductive Polymer Nanocomposites Reduces Electrical Percolation Threshold 5-Fold. , 2013, ACS macro letters.

[27]  H. Uyama,et al.  Green Composite of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Reinforced with Porous Cellulose , 2014 .

[28]  R. Sun,et al.  Electrospun cellulose acetate supported Ag@AgCl composites with facet-dependent photocatalytic properties on degradation of organic dyes under visible-light irradiation. , 2016, Carbohydrate polymers.

[29]  Jinxing Huo,et al.  Solution-processed poly(3,4-ethylenedioxythiophene) nanocomposite paper electrodes for high-capacitance flexible supercapacitors , 2016 .

[30]  Peter Andersson,et al.  The Origin of the High Conductivity of Poly(3,4-ethylenedioxythiophene)−Poly(styrenesulfonate) (PEDOT−PSS) Plastic Electrodes , 2006 .

[31]  N. Sahoo,et al.  Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene , 2017 .

[32]  Kap Seung Yang,et al.  Effect of added nickel nitrate on the physical, thermal and morphological characteristics of polyacrylonitrile-based carbon nanofibers , 2009 .

[33]  Wenshuai Chen,et al.  Effect of cellulose nanofibers on induced polymerization of aniline and formation of nanostructured conducting composite , 2014, Cellulose.

[34]  Eunkyoung Kim,et al.  Flexible Conductive Polymer Patterns from Vapor Polymerizable and Photo-Cross-Linkable EDOT , 2010 .

[35]  Jeonghun Kim,et al.  A Facile Approach for Constructing Conductive Polymer Patterns for Application in Electrochromic Devices and Flexible Microelectrodes. , 2016, ACS applied materials & interfaces.

[36]  T. Aminabhavi,et al.  Polyacrylonitrile-based nanofibers—A state-of-the-art review , 2012 .

[37]  S. Khan,et al.  Synthesis and characterization of a novel bacterial cellulose–poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonate) composite for use in biomedical applications , 2015, Cellulose.

[38]  G. Barra,et al.  Flexible PEDOT-nanocellulose composites produced by in situ oxidative polymerization for passive components in frequency filters , 2016, Journal of Materials Science: Materials in Electronics.

[39]  T. Gries,et al.  Novel Carbon Nanotube/Cellulose Composite Fibers As Multifunctional Materials. , 2015, ACS applied materials & interfaces.

[40]  K. Yoshino,et al.  A mechanically strong, flexible and conductive film based on bacterial cellulose/graphene nanocomposite. , 2012, Carbohydrate polymers.

[41]  M. Toivakka,et al.  Conductivity of PEDOT:PSS on Spin-Coated and Drop Cast Nanofibrillar Cellulose Thin Films , 2015, Nanoscale Research Letters.

[42]  T. Aminabhavi,et al.  Morphological characterization of electrospun carbon nanofiber mats of polyacrylonitrile containing heteropolyacids , 2009 .

[43]  Xueren Qian,et al.  Highly thermostable, flexible, and conductive films prepared from cellulose, graphite, and polypyrrole nanoparticles. , 2015, ACS applied materials & interfaces.

[44]  H. G. Schild.  Application of TGA/FTIR to the thermal degradation mechanism of tetrafluoroethylene–propylene copolymers , 1993 .

[45]  Yongfeng Li,et al.  Fabrication of robust and highly thermally conductive nanofibrillated cellulose/graphite nanoplatelets composite papers , 2017 .

[46]  Y. Shao-horn,et al.  Vacuum-Assisted Layer-by-Layer Nanocomposites for Self-Standing 3D Mesoporous Electrodes , 2014 .

[47]  Lei Jiang,et al.  A strong and highly flexible aramid nanofibers/PEDOT:PSS film for all-solid-state supercapacitors with superior cycling stability , 2016 .

[48]  T. Aminabhavi,et al.  Pore characteristics and electrochemical properties of the carbon nanofibres of polyacrylonitrile containing iron–oxide by electrospinning , 2011 .

[49]  Chang Su Kim,et al.  Highly Efficient and Bendable Organic Solar Cells with Solution‐Processed Silver Nanowire Electrodes , 2013 .

[50]  D. Fang,et al.  Conductive polypyrrole–bacterial cellulose nanocomposite membranes as flexible supercapacitor electrode , 2013 .

[51]  Hongbing Deng,et al.  Layer-by-layer immobilization of quaternized carboxymethyl chitosan/organic rectorite and alginate onto nanofibrous mats and their antibacterial application. , 2015, Carbohydrate polymers.

[52]  Yi Cui,et al.  Transparent and conductive paper from nanocellulose fibers , 2013 .

[53]  Jingkun Xu,et al.  Effects of second dopants on electrical conductivity and thermopower of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)-filled carbon black , 2015 .

[54]  Lucian A. Lucia,et al.  A Novel Cellulose Nanocrystals-Based Approach To Improve the Mechanical Properties of Recycled Paper , 2013 .