A three-dimensional model for bolted connections in wood

Recent criticism of the bolted connection requirements in the Canadian wood design code CSA Standard O86 indicates that the code lacks consideration of the different modes of failure, particularly as they relate to multiple-bolt connections. A finite element model is proposed to predict load–displacement behaviour, stress distributions, ultimate strength, and mode of failure in single- and multiple-bolt connections. The three-dimensional (3-D) model uses anisotropic plasticity for the wood member and elastoplasticity for the bolt. The Weibull weakest link theory is used to predict failure at given levels of probability. Predictions for connection behaviour in Douglas-fir and laminated strand lumber (LSL) correspond to experimentally observed behaviour. The output from the 3-D model is used for a multiple-bolt connection spring model to illustrate many of the phenomena described in the literature.Key words: bolt, Douglas-fir, connection, model, plasticity, weakest link, wood.

[1]  Reza Vaziri,et al.  A Plasticity-Based Constitutive Model for Fibre-Reinforced Composite Laminates , 1991 .

[2]  D. M. Moses,et al.  Stress and failure analysis of wood composites: a new model , 2004 .

[3]  D. E. Cooper,et al.  The Effects of Pin Elasticity, Clearance, and Friction on the Stresses in a Pin-Loaded Orthotropic Plate , 1987 .

[4]  Ian F. C. Smith,et al.  FAILURE IN-THE-ROW MODEL FOR BOLTED TIMBER CONNECTIONS , 1999 .

[5]  Andrew H. Buchanan,et al.  Size effects in timber explained by a modified weakest link theory , 1986 .

[6]  Somasundaram Valliappan,et al.  Non‐linear analysis for anisotropic materials , 1976 .

[7]  I. H. Marshall,et al.  Observations on bolted connections in composite structures , 1989 .

[8]  Fw Smith,et al.  MODELING BOLTED CONNECTIONS IN WOOD: REVIEW , 1997 .

[9]  Mikael Fonselius,et al.  DETERMINATION OF FRACTURE TOUGHNESS FOR WOOD , 1992 .

[10]  W. Cǒté,et al.  Principles of Wood Science and Technology: I Solid Wood , 1977 .

[11]  Peggi L. Clouston,et al.  The Tsai-Wu strength theory for Douglas-fir laminated veneer , 1995 .

[12]  Ian Smith,et al.  Fracture Analysis of Bolted Timber Connections , 1994 .

[13]  Wen-Hwa Chen,et al.  Three-dimensional contact stress analysis of a composite laminate with bolted joint , 1995 .

[14]  Pj Pellicane,et al.  Nonlinear material models for analysis of bolted wood connections , 1997 .

[15]  Robert D. Cook,et al.  An incremental finite-element determination of stresses around loaded holes in wood plates , 1981 .

[16]  Robert E. Rowlands,et al.  Single- and multiple-bolted joints in orthotropic materials , 1982 .

[17]  David Michael Moses.  Constitutive and analytical models for structural composite lumber with applications to bolted connections , 2000 .

[18]  J. H. P. Quenneville,et al.  On the failure modes and strength of steel-wood-steel bolted timber connections loaded parallel-to-grain , 2000 .

[19]  Ian F. C. Smith,et al.  Load and Resistance Factor Design of Timber Joints: International Practice and Future Direction , 2002 .

[20]  A.J.M. Jorissen,et al.  DOUBLE SHEAR TIMBER CONNECTIONS WITH DOWEL TYPE FASTENERS , 1998 .

[21]  H. J. Larsen,et al.  DS/ENV 1995-1-1 NAD National Application Document for Eurocode 5: Design of Timber Structures, Part 1-1: General Rules and Rules for Buildings , 1994 .

[22]  Pj Pellicane,et al.  Qualitative Assessment of Failure in Bolted Connections: Maximum Stress Criterion , 1998 .

[23]  J. H. P. Quenneville,et al.  Design method for bolted connections loaded perpendicular-to-grain , 2001 .

[24]  Ricardo O. Foschi,et al.  Analysis and Design of Griplam Nailed Connections , 1975 .

[25]  Stephen W. Tsai,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[26]  Pj Pellicane,et al.  Qualitative Assessment of Failure in Bolted Connections: Tsai-Wu Criterion , 1998 .

[27]  C. Shih,et al.  Further Developments in Anisotropic Plasticity , 1978 .

[28]  Pedro P. Camanho,et al.  Stress analysis and strength prediction of mechanically fastened joints in FRP: A review , 1997 .

[29]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[30]  Richard A. Scott,et al.  Strength of Mechanically Fastened Composite Joints , 1982 .

[31]  P D Rodd,et al.  A three-dimensional finite element model for locally reinforced timber joints made with hollow dowel fasteners , 2000 .

[32]  H. Li,et al.  Composite behavior of laminated strand lumber , 2003, Wood Science and Technology.