Measurement and Performance of Textile Antenna Efficiency on a Human Body in a Reverberation Chamber

With the advent of on-body communication research in recent years, there is a growing need for antenna developments that satisfy a wide criteria (one being minimal efficiency degradation) in order to be integrated successfully onto human subjects; one promising development is the textile antenna. In this paper we investigate the efficiency performance of some newly designed small sized textile antennas on live human subjects using a reverberation chamber. First, we show that the material selection of these textile antennas can have a crucial effect on the on-body frequency detuning and efficiency levels, as via a comparison we determine that a lossier textile antenna in free space can actually outperform a higher free space efficient textile antenna when placed on-body. This has a profound impact on the material design choices for these small sized antennas. Second, we investigate the performance effects under bent conditions and finally we show that the overall performance of the textile antenna can be mitigated somewhat by variations in on-body distances from the human subject. It is revealed that in some cases a small 20 mm distance from the body is sufficient for the radiation efficiency to approach the free space levels. Theoretical, simulated and experimental evidence is presented to verify the conclusions.

[1]  P. Kildal,et al.  Study of distributions of modes and plane waves in reverberation chambers for the characterization of antennas in a multipath environment , 2001 .

[2]  J. Kostas,et al.  Statistical model for a mode-stirred chamber , 1991 .

[3]  Leif W. Hanlen,et al.  First- and second-order statistical characterizations of the dynamic body area propagation channel of various bandwidths , 2011, Ann. des Télécommunications.

[4]  Lauri Sydänheimo,et al.  A small planar inverted-F antenna for wearable applications , 1999, Digest of Papers. Third International Symposium on Wearable Computers.

[5]  Xiaoming Chen,et al.  Direct coupling as a residual error contribution during OTA measurements of wireless devices in reverberation chamber , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[6]  J. Nitsch,et al.  Statistical interpretation of autocorrelation coefficients for fields in mode-stirred chambers , 2005, 2005 International Symposium on Electromagnetic Compatibility, 2005. EMC 2005..

[7]  Lauri Sydänheimo,et al.  A novel Bluetooth antenna on flexible substrate for smart clothing , 2001, 2001 IEEE International Conference on Systems, Man and Cybernetics. e-Systems and e-Man for Cybernetics in Cyberspace (Cat.No.01CH37236).

[8]  Z. H. Hu,et al.  Measurements and Statistical Analysis of On-Body Channel Fading at 2.45 GHz , 2007, IEEE Antennas and Wireless Propagation Letters.

[9]  P. J. Soh,et al.  Design of a Broadband All-Textile Slotted PIFA , 2012, IEEE Transactions on Antennas and Propagation.

[10]  Minseok Kim,et al.  Statistical Model for 4.5-GHz Narrowband On-Body Propagation Channel With Specific Actions , 2009, IEEE Antennas and Wireless Propagation Letters.

[11]  P. Kildal,et al.  Characterization of Reverberation Chambers for OTA Measurements of Wireless Devices: Physical Formulations of Channel Matrix and New Uncertainty Formula , 2012, IEEE Transactions on Antennas and Propagation.

[12]  P. Besnier,et al.  Performances of UWB Wheeler Cap and Reverberation Chamber to Carry Out Efficiency Measurements of Narrowband Antennas , 2009, IEEE Antennas and Wireless Propagation Letters.

[13]  Per-Simon Kildal,et al.  Correlation and capacity of MIMO systems and mutual coupling, radiation efficiency, and diversity gain of their antennas: simulations and measurements in a reverberation chamber , 2004, IEEE Communications Magazine.

[14]  Per-Simon Kildal,et al.  Detection of a polarization imbalance in reverberation chambers and how to remove it by polarization stirring when measuring antenna efficiencies , 2002 .

[15]  L.R. Arnaut.  Effect of size, orientation, and eccentricity of mode stirrers on their performance in reverberation chambers , 2006, IEEE Transactions on Electromagnetic Compatibility.

[16]  D. Hill.  Plane wave integral representation for fields in reverberation chambers , 1998 .

[17]  D. Hill,et al.  Boundary fields in reverberation chambers , 2005, IEEE Transactions on Electromagnetic Compatibility.

[18]  D. Hill,et al.  On the Use of Reverberation Chambers to Simulate a Rician Radio Environment for the Testing of Wireless Devices , 2006, IEEE Transactions on Antennas and Propagation.

[19]  P. S. Hall,et al.  Antennas and propagation for body centric communications , 2006, 2006 First European Conference on Antennas and Propagation.

[20]  William Scanlon,et al.  Numerical analysis of bodyworn UHF antenna systems , 2001 .

[21]  C. Orlenius,et al.  In Situ Measurement of UHF Wearable Antenna Radiation Efficiency Using a Reverberation Chamber , 2008, IEEE Antennas and Wireless Propagation Letters.

[22]  L. R. Arnaut,et al.  On distributions of fields and power in undermoded mode-stirred reverberation chambers , 2011, 2011 XXXth URSI General Assembly and Scientific Symposium.

[23]  Pekka Salonen,et al.  On the modeling of conductive textile materials for SoftWearAntennas , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[24]  C. Parini,et al.  Antennas and propagation for on-body communication systems , 2007, IEEE Antennas and Propagation Magazine.