Recent developments of lightweight, high performance heat pipes

Abstract Heat pipes, known as “super thermal conductors” have been widely used in many areas for more than 50 years. Currently, due to the various requirements put on cooling systems, such as lightweight, better heat transfer performance, and optimised appearance, heat pipes have been improved significantly in the past decades. This paper summarises the recent developments of lightweight, high performance heat pipes. Various methods or approaches to achieve the requirements of lightweight and high performance are introduced. The applications of lightweight materials can help reduce by up to 80% the weight of conventional copper heat pipes; however the lightweight material often has problems of corrosion. Although improving the design of wick structures and changing the size of conventional heat pipe assemblies can help to reduce weight and achieve high heat flux, there are still some limitations to the applications of lightweight materials such as magnesium due to its incompatibility with some working fluids.

[1]  Y. Maydanik,et al.  Investigation of pulsations of the operating temperature in a miniature loop heat pipe , 2007 .

[2]  Haydn N. G. Wadley,et al.  A quasi-3D analysis of the thermal performance of a flat heat pipe , 2007 .

[4]  M. Kaviany,et al.  Modulated wick heat pipe , 2007 .

[5]  Rabah Boukhanouf,et al.  Experimental investigation of a flat plate heat pipe performance using IR thermal imaging camera , 2006 .

[6]  Kim Tiow Ooi,et al.  A study of multiple heat sources on a flat plate heat pipe using a point source approach , 2000 .

[7]  B. Shaw.  Corrosion Resistance of Magnesium Alloys , 2003 .

[8]  Alain Alexandre,et al.  Roadmap for developing heat pipes for ALCATEL SPACE’s satellites , 2003 .

[9]  M. J. Rightley,et al.  Innovative wick design for multi-source, flat plate heat pipes , 2003, Microelectron. J..

[10]  W. Qin,et al.  Liquid flow in the anisotropic wick structure of a flat plate heat pipe under block-heating condition , 1997 .

[11]  L. L. Vasiliev,et al.  Micro and miniature heat pipes – Electronic component coolers , 2008 .

[12]  S. Tzeng.  Spatial thermal regulation of aluminum foam heat sink using a sintered porous conductive pipe , 2007 .

[13]  V.G. Pastukhov,et al.  Low-noise cooling system for pc on the base of loop heat pipes , 2006, Twenty-Second Annual IEEE Semiconductor Thermal Measurement And Management Symposium.

[14]  Monique Lallemand,et al.  Experimental study on silicon micro-heat pipe arrays , 2004 .

[15]  G. Song,et al.  Corrosion mechanisms of magnesium alloys , 1999 .

[16]  L. L. Vasiliev,et al.  Miniature heat-pipe thermal performance prediction tool – software development , 2001 .

[17]  J. Kruger,et al.  Corrosion of magnesium , 1993 .

[18]  Franz Lura,et al.  Elaboration of thermal control systems on heat pipes for microsatellites Magion 4, 5 and BIRD , 2003 .

[19]  Yuying Yan,et al.  Molecular dynamics simulation for microscope insight of water evaporation on a heated magnesium surface , 2011 .

[20]  W. Rohsenow,et al.  Handbook of Heat Transfer , 1998 .

[21]  J. Esarte,et al.  Experimental analysis of a flat heat pipe working against gravity , 2003 .

[22]  Amir Faghri,et al.  Estimation of the maximum heat flux in the inverted meniscus type evaporator of a flat miniature heat pipe , 1996 .

[23]  Yu.F. Maydanik,et al.  Loop heat pipes , 2005 .

[24]  W. Anderson,et al.  High Temperature Water Heat Pipe Life Tests , 2006 .

[25]  Stéphane Lips,et al.  Nucleate boiling in a flat grooved heat pipe , 2009 .

[26]  Manfred Groll,et al.  Steady-State and Transient Performance of a Miniature Loop Heat Pipe , 2006 .

[27]  Amir Faghri,et al.  Heat Pipe Science And Technology , 1995 .

[28]  Lanchao Lin,et al.  High performance miniature heat pipe , 2002 .

[29]  Manfred Groll,et al.  Thermal control of electronic equipment by heat pipes , 1998 .

[30]  Kim Tiow Ooi,et al.  Analytical effective length study of a flat plate heat pipe using point source approach , 2005 .