SARNET integrated European Severe Accident Research - Conclusions in the Source Term Area

Abstract The overall aim of the SARNET (Severe Accident Research NETwork), in the EU 6th Framework programme was to integrate in a sustainable manner the research capabilities of fifty-one European organisations from eighteen member states of the European Union (EU) plus the Joint Research Centres, with one Canadian company, to resolve important remaining uncertainties and safety issues concerning existing and future nuclear plant, especially water-cooled reactors, under hypothetical severe accident conditions. It emphasised integrating activities, spreading of excellence (including knowledge transfer) and jointly executed research, with the knowledge gained being encapsulated in the European severe accident modelling code ASTEC. This paper summarises the achievements over the whole project in the Source Term Topic, which dealt with potential radioactive release to the environment, covering release of fission products and structural materials from the core, their transport in the primary circuit, and their behaviour in the containment. The main technical areas covered, as emphasised by the earlier EURSAFE project, were the effect of oxidative conditions on fission product release and transport (especially the behaviour of the highly radiotoxic ruthenium under air ingress conditions), iodine volatility in the primary circuit, control rod aerosol release (Ag–In–Cd) that affects iodine transport, containment by-pass in the case of steam generator tube rupture, aerosol retention in containment cracks, aerosol remobilisation in the circuit, and iodine/ruthenium behaviour in the containment especially concerning the volatile fraction in the atmosphere. The studies also covered performance of new experiments, analysis of existing data, and formulation and improvement of theoretical models. Significant progress was made in each area. Looking to the future, the 7th Framework successor project SARNET2 covers the remaining issues concerning iodine and ruthenium, including practical application of the results. The results outlined here will make a good basis for this continued endeavour.

[1]  T. Haste,et al.  SARNET : a European Cooperative Effort on LWR Severe Accident Research , 2006 .

[2]  Martin Steinbrück,et al.  AgInCd control rod failure in the QUENCH-13 bundle test , 2009 .

[3]  C. Duriez,et al.  Separate-effect tests on zirconium cladding degradation in air ingress situations , 2009 .

[4]  Sandro Paci,et al.  Thematic network for a Phebus FPT1 international standard problem (THENPHEBISP) , 2005 .

[6]  S. Guentay,et al.  European Expert Network for the Reduction of Uncertainties in Severe Accident Safety Issues (EURSAFE) , 2005 .

[7]  F. Parozzi,et al.  Development and Validation of the ECART Code for the Safety Analysis of Nuclear Installations , 2006 .

[8]  D. Suckow,et al.  ARTIST: introduction and first results , 2004 .

[9]  F. Archambeau,et al.  Code Saturne: A Finite Volume Code for the computation of turbulent incompressible flows - Industrial Applications , 2004 .

[10]  M. W. Reeks,et al.  Use of a simple model for the interpretation of experimental data on particle resuspension in turbulent flows , 2001 .

[11]  C. Fiche,et al.  Towards a better understanding of iodine chemistry in RCS of nuclear reactors , 2009 .

[12]  R. Zeyen,et al.  The Phebus Fission Product and Source Term International Programmes , 2005 .

[13]  T. Kärkelä,et al.  Progress on ruthenium release and transport under air ingress conditions , 2008 .

[14]  Luis E. Herranz,et al.  SARNET: Integrating Severe Accident Research in Europe - Safety Issues in the Source Term Area , 2006 .

[15]  Luis E. Herranz,et al.  A simple mechanistic model for particle penetration and plugging in tubes and cracks , 2008 .

[16]  Jacques Vendel,et al.  Research works on contamination transfers through cracked concrete walls , 2008 .

[17]  Luis E. Herranz,et al.  Steam generator tube rupture (SGTR) scenarios , 2005 .

[18]  R. Dubourg,et al.  Silver- indium- cadmium- tin aerosol releases and control rod behaviour in PWR accidental conditions , 1999 .

[19]  C. Spengler,et al.  COCOSYS: Status of development and validation of the German containment code system , 2008 .

[20]  J. P. Van Dorsselaere,et al.  SARNET - Severe Accident Research Network of Excellence , 2010 .

[21]  T. Kärkelä,et al.  Ruthenium behaviour under air ingress conditions: Main achievements in the SARNET project , 2008 .

[22]  A. Auvinen,et al.  Revaporisation issues: An Overview , 2007 .

[23]  H. E. Sims,et al.  Development of the INSPECT Model for the Prediction of Iodine Volatility from Irradiated Solutions , 2000 .

[24]  M. P. Kissane,et al.  Interpretation of fission-product transport behaviour in the Phébus FPT0 and FPT1 tests , 2006 .

[25]  W. Plumecocq,et al.  Investigations on Aerosol Transport in Containment Cracks , 2005 .

[26]  W. J. Martin,et al.  OUT-OF-PILE STUDIES OF FISSION-PRODUCT RELEASE FROM OVERHEATED REACTOR FUELS AT ORNL, 1955--1965. , 1967 .

[27]  Christophe Journeau,et al.  Ranking of Severe Accident Research Priorities , 2010 .

[28]  Dana A. Powers,et al.  Technical Issues Associated with Air Ingression During Core Degradation , 2000 .

[29]  L. T. Ritchie,et al.  Relative importance of individual elements to reactor accident consequences assuming equal release fractions , 1986 .

[30]  J. Glatz,et al.  Fission Product and Actinide Release from the Debris Bed Test PHEBUS FPT4 - Synthesis of the Post Test Analyses and of the Revaporisation Testing of the Plenum Samples , 2006 .

[31]  Luis E. Herranz,et al.  Progress in Understanding Key Aerosol Issues , 2010 .

[32]  J. C. Wren,et al.  LIRIC 3.2 an updated model for iodine behaviour in the presence of organic impurities , 2001 .

[33]  T. Lind,et al.  Understanding the behaviour of absorber elements in silver–indium–cadmium control rods during PWR severe accident sequences , 2010 .