An investigation of high operating temperatures in mechanical vapor-compression desalination.

Abstract It is common practice to operate mechanical vapor-compression (MVC) seawater desalination systems at temperatures lower than 80°C. This study presents the detail engineering and economics of a MVC system operating at 172°C. The literature indicates that high overall heat transfer coefficients for the evaporator are possible at high temperatures with dropwise condensation on the steam side and pool boiling on the liquid side. Employing high operating temperature delivers the following advantages: (1) low compression work, (2) small latent heat transfer area, and (3) small compressor. These advantages potentially reduce operating costs and capital investment. The disadvantages follow: (1) pretreatment required to prevent fouling of heat exchangers, (2) careful selection of materials to prevent corrosion, and (3) larger sensible heat transfer area is required. A desalination plant is designed herein to produce 37,854 m 3 /d (10 mil gal/day), which is financed with a 5%, 30-y municipal bond. To maximize energy efficiency, combined-cycle cogeneration is employed. For the US ($5.00/GJ energy), the product water selling price is estimated to be $0.49/m 3 ($1.86/thous gal). For the Middle East ($0.50/GJ energy) the product water selling price is estimated to be $0.38/m 3 ($1.44/thous gal). These are attractive prices relative to competing technologies.

[1]  W. H. Emerson,et al.  Some physical properties of sea water in various concentrations , 1967 .

[2]  Klaus D. Timmerhaus,et al.  Plant design and economics for chemical engineers , 1958 .

[3]  N. Zuber.  On the Stability of Boiling Heat Transfer , 1958, Journal of Fluids Engineering.

[4]  D. W. Tanner,et al.  Heat transfer in dropwise condensation—part II surface chemistry , 1965 .

[5]  L. Ruiz,et al.  An Advanced Vapor-Compression Desalination System , 2006 .

[6]  H. Metiu,et al.  On dropwise condensation on a solid surface , 1965 .

[7]  J. Rose.  On the mechanism of dropwise condensation , 1967 .

[8]  Gerry B. Andeen,et al.  The Use of an Organic Self-Assembled Monolayer Coating to Promote Dropwise Condensation of Steam on Horizontal Tubes , 2000 .

[9]  P. Griffith,et al.  Drop size distributions and heat transfer in dropwise condensation , 1973 .

[10]  B. M. Burnside,et al.  Dropwise Condensation of Steam on a Small Tube Bundle at Turbine Condenser Conditions , 2000 .

[11]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[12]  D. W. Tanner,et al.  Heat transfer in dropwise condensation—Part I The effects of heat flux, steam velocity and non-condensable gas concentration , 1965 .

[13]  P. Griffith,et al.  The effect of surface thermal properties and finish on dropwise condensation , 1967 .

[14]  J. Rose,et al.  Heat-transfer measurements during dropwise condensation of steam , 1964 .

[15]  Jonathan Rose,et al.  An experimental study of heat transfer by dropwise condensation , 1965 .

[16]  E. A. Farber,et al.  Heat Transfer to Water Boiling Under Pressure , 1948, Journal of Fluids Engineering.