Characteristics of sputtered Ti1-xAlxN films for storage node electrode barriers

We report on the characteristics of sputter-deposited Ti1−xAlxN (TiAlN) thin films for storage node electrode barriers of Pt/(BaSr)TiO3(BST)/Pt metal–insulator–metal (MIM) capacitors with a comparative study of TiN films. The substrate temperature (Ts) was found to be one of the key factors affecting the properties of TiAlN thin films, i.e., the resistivity of TiAlN is ∼350 μΩ cm for high Ts deposition (∼450 °C) and ∼1100 μΩ cm for low Ts (∼100 °C). The lower resistivity of TiAlN films deposited at high Ts (450 °C) is attributed to the (200) texture with larger grain size and smaller oxygen concentration compared to those prepared at low Ts. The electrical characteristics of Pt/BST/Pt MIM capacitors on TiAlN were superior to those on the TiN barrier in terms of smaller equivalent oxide thickness (tox), lower tangent δ, and lower leakage current. Better oxidation resistance of TiAlN over TiN appears to be responsible for the better electrical results, especially with the (111) or (200) texture. We also dis...

[1]  J. Rhee,et al.  Oxidation Resistance of Sputtered Ti1 ­ x Al x N Films for Complementary Metal Oxide Semiconductor Storage Node Electrode Barriers , 2001 .

[2]  Seung Jin Yeom,et al.  Intrinsic stress dependence of Pt hillock formation and its related electrical properties of SBT capacitor , 1999 .

[3]  Young-cheol Kim,et al.  High temperature oxidation of (Ti1-XAlX)N coatings made by plasma enhanced chemical vapor deposition , 1999 .

[4]  P. McIntyre,et al.  Kinetics and mechanisms of TiN oxidation beneath Pt thin films , 1997 .

[5]  Byoung-June Kim,et al.  Structural analysis of AlN and (Ti1−XAlX)N coatings made by plasma enhanced chemical vapor deposition , 1996 .

[6]  Lars Hultman,et al.  Crystal growth and microstructure of polycrystalline Ti1−xAlxN alloy films deposited by ultra-high-vacuum dual-target magnetron sputtering , 1993 .

[7]  Lars Hultman,et al.  Interfacial reactions in epitaxial Al/Ti1−xAlxN (0≤x≤0.2) model diffusion‐barrier structures , 1993 .

[8]  J. Greene,et al.  Oxidation of metastable single‐phase polycrystalline Ti0.5Al0.5N films: Kinetics and mechanisms , 1990 .

[9]  K. Pourrezaei,et al.  Failure mechanisms of TiN thin film diffusion barriers , 1988 .

[10]  K. Pourrezaei,et al.  Growth and properties of TiN and TiOxNy diffusion barriers in silicon on sapphire integrated circuits , 1987 .

[11]  W. Münz.  Titanium aluminum nitride films: A new alternative to TiN coatings , 1986 .

[12]  W. Münz,et al.  Morphology and properties of sputtered (Ti,Al)N layers on high speed steel substrates as a function of deposition temperature and sputtering atmosphere , 1986 .

[13]  O. Knotek,et al.  On structure and properties of sputtered Ti and Al based hard compound films , 1986 .

[14]  S. Kanamori.  Investigation of reactively sputtered TiN films for diffusion barriers , 1986 .

[15]  F. W. Saris,et al.  Oxygen in titanium nitride diffusion barriers , 1985 .

[16]  M. Wittmer,et al.  Oxidation kinetics of TiN thin films , 1981 .