Optical design of a high radiative flux solar furnace for Mexico

In the present work, the optical design of a new high radiative flux solar furnace is described. Several optical configurations for the concentrator of the system have been considered. Ray tracing simulations were carried out in order to determine the concentrated radiative flux distributions in the focal zone of the system, for comparing the different proposals. The best configuration was chosen in terms of maximum peak concentration, but also in terms of economical and other practical considerations. It consists of an arrangement of 409 first surface spherical facets with hexagonal shape, mounted on a spherical frame. The individual orientation of the facets is corrected in order to compensate for aberrations. The design considers an intercepted power of 30 kW and a target peak concentration above 10,000 suns. The effect of optical errors was also considered in the simulations.

[1]  U. Groer,et al.  Experimenting with concentrated sunlight using the DLR solar furnace , 1996 .

[2]  N. Hiester,et al.  HEAT FLUX MEASUREMENTS AT THE SUN IMAGE OF THE CALIFORNIA INSTITUTE OF TECHNOLOGY LENS-TYPE SOLAR FURNACE. Technical Report No. V. (Report No. 8) , 1956 .

[3]  C. J. Kevane.  Construction and operation of the Arizona State College solar furnace , 1957 .

[4]  Glen Johnston,et al.  Flux Mapping the 400 m2 “Big Dish” at the Australian National University , 1995 .

[5]  Peter E. Glaser,et al.  Engineering research with a solar furnace , 1958 .

[6]  K. Gulamov,et al.  Operating experience of a big solar furnace 1000kW in power , 1998 .

[7]  Li Li,et al.  Flux distribution of solar furnace using non-imaging focusing heliostat , 2009 .

[8]  P. Bendt,et al.  Effect of Circumsolar Radiation on Performance of Focusing Collectors , 1982 .

[9]  Kok Kiong Tan,et al.  Report of the first prototype of non-imaging focusing heliostat and its application in high temperature solar furnace , 2002 .

[10]  Edward A. Fletcher,et al.  Solarthermal Processing: A Review , 2001 .

[11]  F. Trombe,et al.  Thousand kW solar furnace, built by the National Center of Scientific Research, in Odeillo (France) , 1973 .

[12]  C. Estrada,et al.  Heat transfer analysis in a calorimeter for concentrated solar radiation measurements , 2007 .

[13]  C. Dey,et al.  Sunshape distributions for terrestrial solar simulations , 2003 .

[14]  M. Romero,et al.  Heat transfer in a conical cavity calorimeter for measuring thermal power of a point focus concentrator , 2006 .

[15]  A. Imhof,et al.  Flux Density Distribution in the Focal Region of a Solar Concentrator System , 1991 .

[16]  Tetsuo Noguchi,et al.  Concentration of the solar radiation in a solar furnace , 1957 .

[17]  F. Biggs,et al.  Helios model for the optical behavior of reflecting solar concentrators , 1979 .

[18]  V. J. Romero,et al.  CIRCE2/DEKGEN2: A software package for facilitated optical analysis of 3-D distributed solar energy concentrators , 1991 .

[19]  H. Newkirk,et al.  A study of temperature measurement in a solar furnance , 1958 .

[20]  C. Estrada,et al.  Influence of the size of facets on point focus solar concentrators , 2011 .