Design and Algorithm Verification of a Gyroscope-Based Inertial Navigation System for Small-Diameter Spaces in Multilateral Horizontal Drilling Applications

In the recent years horizontal drilling (HD) has become increasingly important in oil and gas exploration because it can increase the production per well and can effectively rework old and marginal vertical wells. The key element of successful HD is accurate navigation of the drill bit with advanced measurement-while-drilling (MWD) tools. The size of the MWD tools is not significantly restricted in vertical wells because there is enough space for their installation in traditional well drilling, but the diameter of devices for HD must be restricted to less than 30 mm for some applications, such as lateral drilling from existing horizontal wells. Therefore, it is essential to design miniature devices for lateral HD applications. Additionally, magnetometers in traditional MWD devices are easily susceptible to complex downhole interferences, and gyroscopes have been previously suggested as the best avenue to replace magnetometers for azimuth measurements. The aim of this paper is to propose a miniature gyroscope-based MWD system which is referred to as miniature gyroscope-based while drilling (MGWD) system. A prototype of such MGWD system is proposed. The device consists of a two-axis gyroscope and a three-axis accelerometer. Miniaturization design approaches for MGWD are proposed. In addition, MGWD data collection software is designed to provide real-time data display and navigation algorithm verification. A fourth-order autoregressive (AR) model is introduced for stochastic noise modeling of the gyroscope and the accelerometer data. Zero velocity and position are injected into a Kalman filter as a system reference to update system states, which can effectively improve the state observability of the MGWD system and decrease estimation errors. Nevertheless, the azimuth of the proposed MGWD system is not observable in the Kalman filter, and reliable azimuth estimation remains a problem.

[1]  D. H. Zijsling,et al.  Improved Magnetic Surveying Techniques: Field Experience , 1989 .

[2]  D. Irvine-Halliday,et al.  Testing the applicability of fiber optic gyroscopes for azimuth monitoring for measurement-while-drilling processes in the oil industry , 2000, IEEE 2000. Position Location and Navigation Symposium (Cat. No.00CH37062).

[3]  Arild Saasen,et al.  Drilling Fluid affects MWD Magnetic Azimuth and Wellbore Position , 2004 .

[4]  Martin P. Mintchev,et al.  Experimental Feasibility of the In-Drilling Alignment Method for Inertial Navigation in Measurement-While-Drilling , 2011, IEEE Transactions on Instrumentation and Measurement.

[5]  Fabio Dovis,et al.  A Comparison between Different Error Modeling of MEMS Applied to GPS/INS Integrated Systems , 2013, Sensors.

[6]  Martin P. Mintchev,et al.  Observability Analysis for INS Alignment in Horizontal Drilling , 2007, IEEE Transactions on Instrumentation and Measurement.

[7]  John Weston,et al.  Strapdown Inertial Navigation Technology , 1997 .

[8]  Yuanxin Wu,et al.  Observability of Strapdown INS Alignment: A Global Perspective , 2011, IEEE Transactions on Aerospace and Electronic Systems.

[9]  Zhenhua Wang,et al.  Rotary in-drilling alignment using an autonomous MEMS-based inertial measurement unit for measurement- while-drilling processes , 2013, IEEE Instrumentation & Measurement Magazine.

[10]  Yeon Fuh Jiang.  Error analysis of analytic coarse alignment methods , 1998 .

[11]  Arthur Gelb,et al.  Applied Optimal Estimation , 1974 .

[12]  B. Moore.  Principal component analysis in linear systems: Controllability, observability, and model reduction , 1981 .

[13]  Sameh Nassar,et al.  Improving the Inertial Navigation System (INS) error model for INS and INS/DGPS applications , 2003 .

[14]  P. Groves.  Principles of GNSS, Inertial, and Multisensor Integrated Navigation Systems, Second Edition , 2013 .

[15]  I. B. Ishak,et al.  Review of Horizontal Drilling , 1995 .

[16]  R. Von Flatern.  Operators are ready for more sophisticated multilateral well technology , 1996 .

[17]  G. W. Uttecht,et al.  Application of Small-Diameter Inertial Grade Gyroscopes Significantly Reduces Borehole Position Uncertainty , 1983 .

[18]  Aboelmagd Noureldin,et al.  Performance Enhancement of MEMS-Based INS/GPS Integration for Low-Cost Navigation Applications , 2009, IEEE Transactions on Vehicular Technology.

[19]  Richard Lee,et al.  The First Use of Gravity MWD in Offshore Drilling Delivers Reliable Azimuth Measurements in Close Proximity to Sources of Magnetic Interference , 2004 .

[20]  Donald Alexander Richardson.  A Gyroscope Guidance Sensor for Ultra-Deepwater Applications , 2014 .

[21]  Zhen Hua Wang.  MEMS-based Downhole Inertial Navigation Systems for Directional Drilling Applications , 2015 .

[22]  Martin P. Mintchev,et al.  Accuracy limitations of FOG-based continuous measurement-while-drilling surveying instruments for horizontal wells , 2002, IEEE Trans. Instrum. Meas..

[23]  H. Storch,et al.  Statistical Analysis in Climate Research , 2000 .

[24]  C. A. Cheatham,et al.  Effects of Magnetic Interference on Directional Surveys in Horizontal Wells , 1992 .

[25]  Eun-Hwan Shin,et al.  Accuracy Improvement of Low Cost INS/GPS for Land Applications , 2002 .

[26]  Jürgen Matzka,et al.  Improving the accuracy and reliability of MWD/magnetic-Wellbore-Directional surveying in the barents sea , 2014 .

[27]  Martin P. Mintchev,et al.  FOG-based navigation in downhole environment during horizontal drilling utilizing a complete inertial measurement unit: directional measurement-while-drilling surveying , 2005, IEEE Transactions on Instrumentation and Measurement.

[28]  D. Simon.  Optimal State Estimation: Kalman, H Infinity, and Nonlinear Approaches , 2006 .

[29]  Naser El-Sheimy,et al.  MEMS Gyroscope-While-Drilling Environment Qualification Testing , 2010 .

[30]  Thiagalingam Kirubarajan,et al.  Estimation with Applications to Tracking and Navigation , 2001 .