Ultrahigh performance polylactide achieved by the design of molecular structure

[1]  Yadong Lv,et al.  Fully biodegradable polylactide foams with ultrahigh expansion ratio and heat resistance for green packaging. , 2021, International journal of biological macromolecules.

[2]  Xuan Pei,et al.  3D printed bone tissue regenerative PLA/HA scaffolds with comprehensive performance optimizations , 2021, Materials & Design.

[3]  Chul B. Park,et al.  Toughening mechanism of long chain branched polyamide 6 , 2020 .

[4]  Guoqun Zhao,et al.  Fabrication of high porosity Nanocellular polymer foams based on PMMA/PVDF blends , 2020 .

[5]  Yadong Lv,et al.  High performance branched poly(lactide) induced by reactive extrusion with low-content cyclic organic peroxide and multifunctional acrylate coagents , 2020 .

[6]  N. Brosse,et al.  One-step compatibilization of poly(lactic acid) and tannin via reactive extrusion , 2020 .

[7]  Yadong Lv,et al.  Simultaneous Improvement of the Foaming Property and Heat Resistance in Polylactide via One-step Branching Reaction Initiated by Cyclic Organic Peroxide , 2020 .

[8]  Xianhui Zhao,et al.  Poly(lactic acid) Toughening through Chain End Engineering , 2019, ACS Applied Polymer Materials.

[9]  Zhiyong Wei,et al.  End-chain fluorescent highly branched poly(L-lactide)s: Synthesis, architecture-dependence and fluorescent visible paclitaxel-loaded microspheres. , 2019, Biomacromolecules.

[10]  M. Brzeziński,et al.  Star-shaped and branched polylactides: Synthesis, characterization, and properties , 2019, Progress in Polymer Science.

[11]  M. Hillmyer,et al.  Polylactide Foams with Tunable Mechanical Properties and Wettability using a Star Polymer Architecture and a Mixture of Surfactants , 2018, ACS Sustainable Chemistry & Engineering.

[12]  Manjusri Misra,et al.  Composites from renewable and sustainable resources: Challenges and innovations , 2018, Science.

[13]  P. Sobolčiak,et al.  Light-controllable viscoelastic properties of a photolabile carboxybetaine ester-based polymer with mucus and cellulose sulfate , 2018, Emergent Materials.

[14]  B. Whiteside,et al.  Structure and Property of Microinjection Molded Poly(lactic acid) with High Degree of Long Chain Branching , 2018, Industrial & Engineering Chemistry Research.

[15]  M. Kontopoulou,et al.  Rheological characterization of long-chain branched poly(lactide) prepared by reactive extrusion in the presence of allylic and acrylic coagents , 2018, Journal of Rheology.

[16]  P. Sobolčiak,et al.  Foamy phase change materials based on linear low-density polyethylene and paraffin wax blends , 2018, Emergent Materials.

[17]  Le Li,et al.  Tailoring Crystalline Morphology by High-Efficiency Nucleating Fiber: Toward High-Performance Poly(l-lactide) Biocomposites. , 2018, ACS applied materials & interfaces.

[18]  S. Torres‐Giner,et al.  Enhancement of mechanical and thermal properties of injection-molded polylactide parts by addition of acrylated epoxidized soybean oil , 2020 .

[19]  M. Kontopoulou,et al.  Tuning the Rheological, Thermal, and Solid-State Properties of Branched PLA by Free-Radical-Mediated Reactive Extrusion , 2017 .

[20]  C. Macosko,et al.  Star vs long chain branching of poly(lactic acid) with multifunctional aziridine , 2017 .

[21]  Manjusri Misra,et al.  Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance , 2016 .

[22]  G. Hu,et al.  Tensile and impact properties of microcellular isotactic polypropylene (PP) foams obtained by supercritical carbon dioxide , 2016 .

[23]  Richard E. Lee,et al.  Thermoforming of Polylactic Acid Foam Sheets: Crystallization Behaviors and Thermal Stability , 2016 .

[24]  P. Coates,et al.  Fibrillation of chain branched poly (lactic acid) with improved blood compatibility and bionic structure , 2015 .

[25]  Yunxuan Weng,et al.  Heat resistance, crystallization behavior, and mechanical properties of polylactide/nucleating agent composites , 2015 .

[26]  J. Kovács,et al.  Comparison of thermal, mechanical and thermomechanical properties of poly(lactic acid) injection-molded into epoxy-based Rapid Prototyped (PolyJet) and conventional steel mold , 2015, Journal of Thermal Analysis and Calorimetry.

[27]  Chul B. Park,et al.  Poly (lactic acid) foaming , 2014 .

[28]  Chul B. Park,et al.  Extruded PLA/clay nanocomposite foams blown with supercritical CO2 , 2014 .

[29]  Yaqiong Zhang,et al.  Studies on crystallization kinetics of bimodal long chain branched polylactides , 2014 .

[30]  Hongjun Xu,et al.  Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure through γ-Radiation-Induced Chemical Reactions , 2014 .

[31]  Chen Zhang,et al.  Study on the effect of dispersion phase morphology on porous structure of poly (lactic acid)/poly (ethylene terephthalate glycol-modified) blending foams , 2013 .

[32]  Wei Yu,et al.  The preparation and crystallization of long chain branching polylactide made by melt radicals reaction , 2013 .

[33]  D. Vlassopoulos,et al.  Uniaxial extensional rheology of well-characterized comb polymers , 2013 .

[34]  X. Jing,et al.  Rheology and crystallization of long-chain branched poly(l-lactide)s with controlled branch length , 2012 .

[35]  Xiaoqing Liu,et al.  The crystallization behavior and mechanical properties of polylactic acid in the presence of a crystal nucleating agent , 2012 .

[36]  Chul B. Park,et al.  Continuous processing of low-density, microcellular poly(lactic acid) foams with controlled cell morphology and crystallinity , 2012 .

[37]  Chul B. Park,et al.  Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide , 2011 .

[38]  Wei Yu,et al.  Long chain branching polylactide: Structures and properties , 2010 .

[39]  Yan Li,et al.  Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites , 2010 .

[40]  S. Coiai,et al.  Control of macromolecular architecture during the reactive functionalization in the melt of olefin polymers , 2009 .

[41]  Wei Yang,et al.  Thermal and mechanical properties of chemical crosslinked polylactide (PLA) , 2008 .

[42]  L. Lim,et al.  Processing technologies for poly(lactic acid) , 2008 .

[43]  M. Mihai,et al.  Extrusion foaming of semi-crystalline PLA and PLA/thermoplastic starch blends. , 2007, Macromolecular bioscience.

[44]  M. McKee,et al.  Branched polyesters: recent advances in synthesis and performance , 2005 .

[45]  S. Ray,et al.  New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology , 2003 .