Early fatigue crack growth as the damage accumulation process

A probabilistic approach to modeling of the initial stage of fatigue crack growth is suggested based on the concepts of continuum damage mechanics. The material is presented as a set of microstructural elements with randomly distributed properties. Both the grains and intergranular boundaries are considered as the elements of microstructure. The parameters of resistance of each element to damage accumulation are considered as random variables. These parameters are distributed among the elements independently that allows to model the damage process in polycrystalline materials. The damage measure depends on the characteristic normal and tangential stresses in order to take into account the tensile and shear fracture modes for each element of microstructure. It is assumed that a nucleus of a crack is initially present near the body surface as a single completely ruptured element. The final damage of an element is considered as the crack advancement. The crack is modelled as a sequence of ruptured grains for the transgranular fracture, and as a sequence of couples of neighboring ruptured grains when the intergranular rupture is considered. Numerical simulation is performed to illustrate feasibility of the proposed model. In particular, non-planar crack propagation, blunting, kinking and branching of cracks at the early stage is demonstrated. The non-monotonous pattern of the short crack growth process is observed. Statistical scattering of the current crack size and the crack growth rate as functions of the cycle number and the crack depth is studied.

[1]  S. Batdorf,et al.  Fracture statistics of brittle materials with surface cracks , 1978 .

[2]  Milena Vujosevic,et al.  Intrinsic failure modes of brittle materials , 1998 .

[3]  R. Ghanem,et al.  Stochastic Finite Elements: A Spectral Approach , 1990 .

[4]  Salvatore Torquato,et al.  Morphology and effective properties of disordered heterogeneous media , 1998 .

[5]  Pol D. Spanos,et al.  Probabilistic Structural Mechanics: Advances in Structural Reliability Methods : Iutam Symposium, San Antonio, Texas, USA June 7-10, 1993 , 1994 .

[6]  L. Pook,et al.  On fatigue crack paths , 1995 .

[7]  Nisitani Hironobu,et al.  A small-crack growth law and its related phenomena , 1992 .

[8]  S. B. Batdorf,et al.  Some approximate treatments of fracture statistics for polyaxial tension , 1977 .

[9]  K. J. Miller,et al.  Short Fatigue Cracks , 1992 .

[10]  V. V. Bolotin,et al.  Stability Problems in Fracture Mechanics , 1996 .

[11]  V. V. Bolotin.  A unified approach to damage accumulation and fatigue crack growth , 1985 .

[12]  V. V. Bolotin.  Stochastic Models of Fracture of Unidirectional Fiber Composites , 1982 .

[13]  V. V. Bolotin.  Mechanics of Fatigue , 1999 .

[14]  Toshio Mura,et al.  Micromechanics of defects in solids , 1982 .

[15]  V. Tvergaard.  Material failure by void coalescence in localized shear bands , 1982 .

[16]  Hui Fan,et al.  Prediction of Service Life for Machines and Structures , 1990 .

[17]  Short fatigue crack growth behaviour in Al 5083 alloy , 1997 .

[18]  M. Shinozuka,et al.  Simulation of Stochastic Processes by Spectral Representation , 1991 .

[19]  Erik H. Vanmarcke,et al.  Stochastic finite elements and experimental measurements , 1994 .

[20]  I. Doghri.  Mechanics of Deformable Solids , 2000 .

[21]  V. V. Bolotin,et al.  Probabilistic model of early fatigue crack growth , 1998 .

[22]  V. V. Bolotin.  Statistical Methods in Structural Mechanics , 1969 .

[23]  G. K. Haritos,et al.  Mesomechanics: The microstructure-mechanics connection , 1988 .

[24]  S. Winterstein,et al.  Random Fatigue: From Data to Theory , 1992 .

[25]  J. Hancock,et al.  Ductile failure by void nucleation, growth and coalescence , 1984 .

[26]  Hermann Riedel,et al.  Fracture at high temperatures , 1987 .

[27]  Ramesh Talreja,et al.  Damage mechanics of composite materials , 1994 .