Computational analysis of the effects of carbon nanotubes on the bending, buckling, and vibration characteristics of carbon fabric/polymer hybrid nanocomposite plates

[1]  R. Ansari,et al.  A new numerical approach for low velocity impact response of multiscale-reinforced nanocomposite plates , 2021, Engineering with Computers.

[2]  K. Liew,et al.  Predicting vibration characteristics of rotating composite blades containing CNT-reinforced composite laminae and damaged fiber-reinforced composite laminae , 2020 .

[3]  M. Kassa,et al.  Micromechanical modeling and characterization of elastic behavior of carbon nanotube‐reinforced polymer nanocomposites: A combined numerical approach and experimental verification , 2020 .

[4]  H. Gökkaya,et al.  Optimization of machining parameters for kerf angle and roundness error in abrasive water jet drilling of CFRP composites with different fiber orientation angles , 2020, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[5]  Hansang Kim,et al.  Mode II interlaminar fracture toughness of carbon nanotubes/epoxy film-interleaved carbon fiber composites , 2020, Composite Structures.

[6]  Yiyin Su,et al.  Electrical conductivity and mechanical property improvement by low-temperature carbon nanotube growth on carbon fiber fabric with nanofiller incorporation , 2020 .

[7]  A. Darvizeh,et al.  Thermal expanding behavior of carbon nanotube-shape memory polymer nanocomposites , 2019 .

[8]  K. Liew,et al.  The recent progress of functionally graded CNT reinforced composites and structures , 2019, Science China Physics, Mechanics & Astronomy.

[9]  K.M. Liew,et al.  Modeling geometrically nonlinear large deformation behaviors of matrix cracked hybrid composite deep shells containing CNTRC layers , 2019, Computer Methods in Applied Mechanics and Engineering.

[10]  F. Ebrahimi,et al.  Wave propagation response of multi-scale hybrid nanocomposite shell by considering aggregation effect of CNTs , 2019, Mechanics Based Design of Structures and Machines.

[11]  Woong‐Ryeol Yu,et al.  Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites , 2019, Composite Structures.

[12]  Carlos Gonz'alez,et al.  Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils , 2019, Composites Part A: Applied Science and Manufacturing.

[13]  F. Dammak,et al.  Mechanical buckling analysis of functionally graded power-based and carbon nanotubes-reinforced composite plates and curved panels , 2018, Composites Part B: Engineering.

[14]  M. Tarfaoui,et al.  Mechanical behavior of carbon nanotubes-based polymer composites under impact tests , 2018, Journal of Composite Materials.

[15]  Jinyuan Tang,et al.  Vibration analysis of functionally graded carbon nanotube reinforced composites (FG-CNTRC) circular, annular and sector plates , 2018, Composite Structures.

[16]  K. Lafdi,et al.  Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes , 2018, Applied Composite Materials.

[17]  K. Lafdi,et al.  Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact , 2017 .

[18]  L. W. Zhang,et al.  Mechanical behavior of laminated CNT-reinforced composite skew plates subjected to dynamic loading , 2017 .

[19]  R. Ansari,et al.  Micromechanical characterizing elastic, thermoelastic and viscoelastic properties of functionally graded carbon nanotube reinforced polymer nanocomposites , 2017 .

[20]  M. Tarfaoui,et al.  Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites , 2017 .

[21]  L. W. Zhang,et al.  On the study of the effect of in-plane forces on the frequency parameters of CNT-reinforced composite skew plates , 2017 .

[22]  R. Ansari,et al.  Micromechanical investigation of creep-recovery behavior of carbon nanotube-reinforced polymer nanocomposites , 2016 .

[23]  L. W. Zhang,et al.  Free vibration analysis of triangular CNT-reinforced composite plates subjected to in-plane stresses using FSDT element-free method , 2016 .

[24]  L. W. Zhang,et al.  Elastodynamic analysis of quadrilateral CNT-reinforced functionally graded composite plates using FSDT element-free method , 2016 .

[25]  K. M. Liew,et al.  Postbuckling analysis of axially compressed CNT reinforced functionally graded composite plates resting on Pasternak foundations using an element-free approach , 2016 .

[26]  K. Liew,et al.  Optimal shape control of CNT reinforced functionally graded composite plates using piezoelectric patches , 2016 .

[27]  K. M. Liew,et al.  Buckling analysis of FG-CNT reinforced composite thick skew plates using an element-free approach , 2015 .

[28]  Y. Zare.  Effects of interphase on tensile strength of polymer/CNT nanocomposites by Kelly–Tyson theory , 2015 .

[29]  L. Gorbatikh,et al.  Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubes , 2014 .

[30]  Erik T. Thostenson,et al.  Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties , 2012 .

[31]  S. Basu,et al.  Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites , 2011 .

[32]  Dimitris C. Lagoudas,et al.  Micromechanical analysis of the effective elastic properties of carbon nanotube reinforced composites , 2006 .

[33]  Ananda Babu Arumugam,et al.  Three-phase modelling and characterization of elastic behavior of MWCNT reinforced GFRP composites: A combined numerical and experimental study , 2020 .

[34]  M. Mahmoodi,et al.  Electro-thermo-mechanical responses of laminated smart nanocomposite moderately thick plates containing carbon nanotube – A multi-scale modeling , 2020 .

[35]  K. Rhee,et al.  Simplification and development of McLachlan model for electrical conductivity of polymer carbon nanotubes nanocomposites assuming the networking of interphase regions , 2019, Composites Part B: Engineering.

[36]  S. Rouhi,et al.  Finite element investigation of the elastic modulus of concentric boron nitride and carbon multi-walled nanotubes , 2018, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[37]  K. M. Liew,et al.  Analysis of laminated CNT reinforced functionally graded plates using the element-free kp-Ritz method , 2016 .

[38]  Harlal Singh Mali,et al.  Unit cell model of woven fabric textile composite for multiscale analysis , 2013 .

[39]  Y. Chiu,et al.  Characterizing elastic properties of carbon nanotubes/polyimide nanocomposites using multi-scale simulation , 2010 .

[40]  V. Polezhaev.  Effect of a , 1974 .