论文信息 - A CMOS front-end interface ASIC for SiPM-based positron emission tomography imaging systems

A CMOS front-end interface ASIC for SiPM-based positron emission tomography imaging systems

A current-mode interface chip for Silicon Photomultiplier (SiPM) array based positron emission tomography (PET) imaging front-ends is described. The circuit uses a high-speed current amplifier with a low input impedance, to minimize signal loss at the SiPM amplifier interface. To reduce the impact of dark noise, a novel high-speed threshold detection/comparator circuit is used to remove unwanted noise events. A prototype chip interfaces an array of SiPMs to the digital backend of a Positron Emission Tomography (PET) system using 64 readout channels, each of which contain a current amplifier and a threshold detection component. To reduce the number of backend channels, a row-column pulse positioning architecture (RCA) has been implemented. The ASIC occupies an area of 14.04 mm2 in 130nm STMicroelectronics HCMOS9GP process. The measured input impedance of the current amplifier is 20 ohms at 10 MHz, while the threshold detection circuit's propagation delay is 0.3–2ns.

[1] P.-A. Besse,et al. Single photon detector fabricated in a complementary metal-oxide-semiconductor high-voltage technology , 2003 .

[2] H. Traff,et al. Novel approach to high speed CMOS current comparators , 1992 .

[3] Garry Chinn,et al. Compressed sensing for the multiplexing of PET detectors , 2011, 2011 IEEE Nuclear Science Symposium Conference Record.

[4] G.C. Temes,et al. An NMOS buffer amplifier , 1984, IEEE Transactions on Electron Devices.

[5] Thomas K. Lewellen,et al. Performance characteristics of micro crystal element (MiCE) detectors , 2000 .

[6] Edoardo Charbon,et al. A Time-Resolved, Low-Noise Single-Photon Image Sensor Fabricated in Deep-Submicron CMOS Technology , 2012, IEEE Journal of Solid-State Circuits.