High-voltage testing of a 500-kV dc photocathode electron gun.

A high-voltage dc photocathode electron gun was successfully conditioned up to a voltage of 550 kV and a long-time holding test for 8 h was demonstrated at an acceleration voltage of 500 kV. The dc photocathode electron gun is designed for future light sources based on energy-recovery linac and consists of a Cockcroft-Walton generator, a segmented cylindrical ceramic insulator, guard-ring electrodes, a support-rod electrode, a vacuum chamber, and a pressurized insulating gas tank. The segmented cylindrical ceramic insulator and the guard-ring electrodes were utilized to prevent any damage to the insulator from electrons emitted by the support-rod electrode.

[1]  I. Pogorelsky,et al.  Potential Uses of ERL-Based $\gamma$-Ray Sources , 2008, IEEE Transactions on Plasma Science.

[2]  I. Bazarov,et al.  Maximum achievable beam brightness from photoinjectors. , 2009, Physical review letters.

[3]  Charles Sinclair,et al.  Multivariate optimization of a high brightness dc gun photoinjector , 2005 .

[4]  Robin J. Evans,et al.  The JLab high power ERL light source , 2006 .

[5]  Qun Shen,et al.  Energy recovery linacs as synchrotron radiation sources (invited) , 2002 .

[6]  W. Diamond New perspectives in vacuum high voltage insulation. I. The transition to field emission , 1998 .

[7]  Paul G. Slade,et al.  The Vacuum Interrupter: Theory, Design, and Application , 2007 .

[9]  Nobuyuki Nishimori,et al.  Detection of radioactive isotopes by using laser Compton scattered γ-ray beams , 2009 .

[10]  D. Ouzounov,et al.  Design and Performance of the Cornell ERL DC Photoemission Gun , 2009 .

[11]  Hiroshi Matsumoto,et al.  Reduction of field emission dark current for high-field gradient electron gun by using a molybdenum cathode and titanium anode , 2005 .

[12]  R. Hajima,et al.  An intense terahertz radiation source at the Compact ERL , 2008 .

[13]  Multiparameter optimization of an ERL injector , 2006 .

[14]  W. Diamond New perspectives in vacuum high voltage insulation. II. Gas desorption , 1998 .

[15]  H. Kurisu,et al.  Titanium alloy material with very low outgassing , 2003 .

[16]  H. Kurisu,et al.  Outgassing Properties of Chemically Polished Titanium Materials , 2006 .

[17]  Gwyn P. Williams,et al.  DC High Voltage Conditioning of Photoemission Guns at Jefferson Lab FEL , 2009 .