There is provided a Standdreh- and milling machine which consists of a horizontal frame and two uprights, which are mounted respectively on the left and right side at one end of the frame and perpendicular to frame, there are further provided the following components: two part X-axis linear guide rails located and two X-spindles which are disposed along the axis X relative to the two stands on the left and right on both sides of the frame, wherein the end of each X-spindle in each case an X-motor is arranged, a mono axis -Drehbuhne which sits between the located part of axis X linear guide rails, is directly driven by a located in the lower part of the first outer streamers torque motor and the cross-frame along the X axis is oscillatably connected to the two X-spindles, two contained the first part of the Z axis linear guide rails and two first Z-spindles which respect ve along the axis Z ils sitting on the two uprights, wherein the first between the two located on the part of Z-axis linear guide rails is provided a bar, which is upwardly and downwardly swingable connected along the axis Z with the first two Z-spindles, wherein the end of each Z-spindle respectively a first Z-motor is disposed, and two Y linear guide rails and a Y-spindle, which are arranged under the beam along the axis Y respectively above and, wherein the beam is formed with a cross slide movable along the axis Y can swing, with the Y spindle is connected, at the end of the Y-spindle a Y-motor is provided. Einzelpendelfraskopfbauteile are arranged on said cross slide which are driven directly by the downstream second outer streamers torque motor.