Material removal profile for large mould polishing with coated abrasives

This paper analytically develops a type of model for predicting material removal depth in large mould polishing with coated abrasives. This model based on the statistical theory, and the abrasive material surface contact mechanics is established. The material removal depth is calculated by integrating the linear removal intensity or the removal depth per unit time along the polishing path. The material removal depth profiles of the circular abrasive tool and the annular abrasive tool are presented when polishing paths are a straight line and a curve, respectively. The effects of process parameters on the material removal depth are simulated and analyzed, such as polishing pressure, feed rate, tool speed, and internal radius, when the polishing path is a straight line. The workpiece surfaces after milling were polished by using annular abrasive tool moving along a straight line in the experiment. This model is evaluated by comparing the theoretical material removal depth with those experimental results available. It is concluded that the experiment results are approximately consistent with the model predictions.

[1]  Zhichao Dong,et al.  Study on removal mechanism and removal characters for SiC and fused silica by fixed abrasive diamond pellets , 2014 .

[2]  Liangchi Zhang,et al.  A statistical model for material removal prediction in polishing , 2012 .

[3]  Yan Liang,et al.  Kinetics model incorporating both the chemical and mechanical effects on material removal for copper chemical mechanical polishing , 2012 .

[4]  Liangchi Zhang,et al.  Polishing of polycrystalline diamond by the technique of dynamic friction—Part 5: Quantitative analysis of material removal , 2009 .

[5]  Tsann-Rong Lin,et al.  An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process , 2007 .

[6]  Fritz Klocke,et al.  Removal mechanisms in polishing of silicon based advanced ceramics , 2009 .

[7]  David Dornfeld,et al.  Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes , 2013 .

[8]  L. Blunt,et al.  An experimental study on the correlation of polishing force and material removal for bonnet polishing of cobalt chrome alloy , 2014 .

[9]  Zone-Ching Lin,et al.  A study of material removal amount of sapphire wafer in application of chemical mechanical polishing with different polishing pads , 2012 .

[10]  Yongwu Zhao,et al.  Modeling the effects of particle deformation in chemical mechanical polishing , 2012 .

[11]  Chi Fai Cheung,et al.  Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing , 2011 .

[12]  Ji Zhao,et al.  Modeling and analysis of the material removal profile for free abrasive polishing with sub-aperture pad , 2014 .

[13]  Ji Zhao,et al.  A Novel Vision Localization Method of Automated Micro-Polishing Robot , 2009 .

[14]  Yiqiang Wang,et al.  Modeling and analysis of the material removal depth for stone polishing , 2009 .

[15]  Yuwen Sun,et al.  Investigations on the automatic precision polishing of curved surfaces using a five-axis machining centre , 2014 .

[16]  Ming-June Tsai,et al.  Robotic polishing of precision molds with uniform material removal control , 2009 .

[17]  The Effect of Pad-Asperity Curvature on Material Removal Rate in Chemical-Mechanical Polishing , 2014 .

[18]  Toshiro Higuchi,et al.  Development of micro polishing system using a magnetostrictive vibrating polisher , 2013 .

[19]  A. Atkins,et al.  Toughness and the transition between cutting and rubbing in abrasive contacts , 2007 .

[20]  Masakazu Fujimoto,et al.  Effects of pressure and shear stress on material removal rate in ultra-fine polishing of optical glass with magnetic compound fluid slurry , 2014 .

[21]  Liu Yan,et al.  An empirical approach to explain the material removal rate for copper chemical mechanical polishing , 2012 .

[22]  Zone-Ching Lin,et al.  Abrasive removal depth for polishing a sapphire wafer by a cross-patterned polishing pad with different abrasive particle sizes , 2014 .

[23]  Liam Blunt,et al.  Experimental investigation and analytical modelling of the effects of process parameters on material removal rate for bonnet polishing of cobalt chrome alloy , 2014 .