A durable, shock-resistant electromagnetic optical scanner with polyimide-based hinges

This paper presents a moving-coil electromagnetic optical scanner with newly developed hinge structure consisting of multilayered polyimide films with aluminum lead wires in between. The main purpose is to obtain a scanner with good durability and shock resistance for practical use. Polyimide has both features, and the aluminum lead wires, connecting the moving-coils and fixed electrode pads, are more reliable, because they are located inside the hinge, where the stress caused by torsional deformation and atmospheric degradation are minimal. An electromagnetic actuator is used to satisfy the following requirements; a millimeter-sized mirror, resonant and galvanometric operation, and scan angle control. Scanner prototypes with two different specifications (i.e., fast scanner and slow scanner) were fabricated and characterized. Driven with a sinusoidal current of /spl plusmn/20 mA, the fast scanner and the slow one vibrated with an optical scan angle (/spl theta//sub o/) of 1/spl deg/ at the resonant frequency (f/sub r/) of 1.7 kHz and /spl theta//sub o/ of 60/spl deg/ at f/sub r/ of 72 Hz, respectively. Durability was demonstrated with a shock test of 2500 G and a life test of over 13 000 h. By substituting sputtered aluminum driving coil with electroplated copper coil, improved /spl theta//sub o/ of 16.8/spl deg/ was obtained at f/sub r/ of 2.7 kHz.

[1]  S. Wakabayashi,et al.  Two Dimensional Silicon Micromachined Optical Scanner Integrated With Photo Detector And Piezoresistor , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[2]  Mark G. Allen,et al.  In situ measurement of mechanical properties of polyimide films using micromachined resonant string structures , 1999 .

[3]  Larry J. Hornbeck.  Digital Light Processing and MEMS: reflecting the digital display needs of the networked society , 1996, Other Conferences.

[4]  Didier Lippens,et al.  Determination of the mechanical properties of thin polyimide films deposited on a GaAs substrate by bulging and nanoindentation tests , 1999 .

[5]  Y. Tai,et al.  Micromachined electromagnetic scanning mirrors , 1997 .

[6]  S. Kaneko,et al.  Monolithic fabrication of flexible film and thinned integrated circuits , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[7]  K. Yamada,et al.  A novel asymmetric silicon micro-mirror for optical beam scanning display , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[8]  Mehran Mehregany,et al.  A rotary electrostatic micromotor 1/spl times/8 optical switch , 1999 .

[9]  F. Merat,et al.  Diffraction grating scanners using polysilicon micromotors , 1995 .

[10]  Abdelsamie Moet,et al.  The mechanical behaviour of thin polyimide films on a silicon substrate under point loading , 1989 .

[11]  Francis L. Merat,et al.  Fabrication of polygon mirror microscanner by surface micromachining , 1994, Optics & Photonics.

[12]  K. Bhosale,et al.  Relaxation of mechanical stress in polyimide films by softbaking , 1996 .

[13]  M. Mehregany,et al.  High-aspect-ratio photolithography for MEMS applications , 1995 .

[14]  Kurt E. Petersen,et al.  Silicon Torsional Scanning Mirror , 1980, IBM J. Res. Dev..

[15]  M. Esashi,et al.  Silicon micromachined two-dimensional galvano optical scanner , 1994 .

[16]  C. Ahn,et al.  A novel bi-directional magnetic microactuator using electroplated permanent magnet arrays with vertical anisotropy , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).