Additive manufacturing of graphene reinforced 316L stainless steel composites with tailored microstructure and mechanical properties

[1]  A. Pandey,et al.  An effective process to reinforced open cell 316LSS foams with MWCNT for improving biocompatibility , 2022, Materials Chemistry and Physics.

[2]  Qilin Guo,et al.  Controlling process instability for defect lean metal additive manufacturing , 2022, Nature communications.

[3]  B. Almangour,et al.  Microstructural and thermal expansion behaviour of graphene reinforced 316L stainless steel matrix composite prepared via powder bed fusion additive manufacturing , 2021 .

[4]  Juze Jiang,et al.  Novel phenomena of graphene secondary dispersion and phase transformation in selective laser melting of 15-5PH/graphene composites , 2021 .

[5]  J. M. Weaver,et al.  Interface Joint Strength between SS316L Wrought Substrate and Powder Bed Fusion Built Parts , 2021, Materials.

[6]  J. Alvarado-Orozco,et al.  Study of volumetric energy density limitations on the IN718 mesostructure and microstructure in laser powder bed fusion process , 2021 .

[7]  Xitao Wang,et al.  Microstructural evolution, mechanical and physical properties of graphene reinforced aluminum composites fabricated via powder metallurgy , 2020, Materials Science and Engineering: A.

[8]  Gabriel Meric de Bellefon,et al.  Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L , 2020 .

[9]  H. Jing,et al.  Selective laser melting of low-content graphene nanoplatelets reinforced 316L austenitic stainless steel matrix: Strength enhancement without affecting ductility , 2020 .

[10]  Ö. Güler,et al.  Carbon nanotube (CNT) reinforced magnesium matrix composites: The effect of CNT ratio on their mechanical properties and corrosion resistance , 2020 .

[11]  G. Schneider,et al.  Wettability of graphene , 2020, Surface Science Reports.

[12]  Zan Li,et al.  Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes , 2020 .

[13]  Arunandan Kumar,et al.  Synthesis, characterization, and properties of graphene reinforced metal-matrix nanocomposites , 2020 .

[14]  A. Srivastava,et al.  Microstructural and mechanical properties evaluation of graphene reinforced stainless steel composite produced via selective laser melting , 2020, Materials Science and Engineering: A.

[15]  D. Grzesiak,et al.  Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting , 2020 .

[16]  R. Hague,et al.  3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting , 2019, Progress in Materials Science.

[17]  A. V. Radhamani,et al.  Structural, mechanical and corrosion properties of CNT-304 stainless steel nanocomposites , 2019, Progress in Natural Science: Materials International.

[18]  Di Zhang,et al.  Enhanced corrosion resistance in metal matrix composites assembled from graphene encapsulated copper nanoflakes , 2019, Carbon.

[19]  Ehsan Toyserkani,et al.  A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties , 2018 .

[20]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[21]  Dariusz Grzesiak,et al.  Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites , 2017 .

[22]  Xiaojun Wang,et al.  Graphene nanoplatelets induced heterogeneous bimodal structural magnesium matrix composites with enhanced mechanical properties , 2016, Scientific Reports.

[23]  C. Emmelmann,et al.  Additive manufacturing of metals , 2016 .

[24]  Y. Zhong,et al.  Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting , 2016 .

[25]  Xufeng Zhou,et al.  Copper–graphene bulk composites with homogeneous graphene dispersion and enhanced mechanical properties , 2016 .

[26]  G. Tong,et al.  Graphene-reinforced metal matrix nanocomposites – a review , 2016 .

[27]  X. M. Zhang,et al.  Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites , 2015 .

[28]  David Parobek,et al.  Wettability of graphene , 2015 .

[29]  Zhijian Shen,et al.  Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions , 2015 .

[30]  Amitava De,et al.  Heat transfer and material flow during laser assisted multi-layer additive manufacturing , 2014 .

[31]  F. Pan,et al.  Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium , 2014 .

[32]  S. Hur,et al.  Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing , 2014 .

[33]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[34]  Taek-Soo Kim,et al.  Enhanced Mechanical Properties of Graphene/Copper Nanocomposites Using a Molecular‐Level Mixing Process , 2013, Advanced materials.

[35]  K. Lu,et al.  Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles , 2012 .

[36]  O. Z. Angel,et al.  Effect of Surface Morphology of ZnO Electrodeposited on Photocatalytic Oxidation of Methylene Blue Dye Part I: Analytical Study , 2011, International Journal of Electrochemical Science.

[37]  A. Esnaola,et al.  Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies , 2010 .

[38]  Li Wang,et al.  Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting , 2010 .

[39]  A. Jarfors,et al.  Porosity formation and gas bubble retention in laser metal deposition , 2009 .

[40]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[41]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[42]  P. Eklund,et al.  Raman scattering from high-frequency phonons in supported n-graphene layer films. , 2006, Nano letters.

[43]  Z. Zhang,et al.  Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength , 2006 .

[44]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[45]  T. Narutani,et al.  Grain-size strengthening in terms of dislocation density measured by resistivity , 1991 .

[46]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[47]  N. Birbilis,et al.  On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting , 2017 .

[48]  Jean-Pierre Kruth,et al.  Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting , 2011 .

[49]  Seiji Katayama,et al.  Solidification microstructure of laser welded stainless steels , 1984 .