Ductile-to-brittle transition in tensile failure due to shear-affected zone with a stress-concentration source: a comparative study on punched-plate tensile-failure characteristics of precipitation-hardened and dual-phase steels

[1]  H. Noguchi,et al.  Effect of shear-affected zone on fatigue crack propagation mode , 2018, International Journal of Fatigue.

[2]  Y. Mine,et al.  Quantification of large deformation with punching in dual phase steel and change of its microstructure - Part I: Proposal of the quantification technique of the punching damage of the dual phase steel , 2016 .

[3]  Sunghak Lee,et al.  Correlation between fracture toughness and stretch-flangeability of advanced high strength steels , 2016 .

[4]  D. Casellas,et al.  Fracture Toughness to Understand Stretch-Flangeability and Edge Cracking Resistance in AHSS , 2016, Metallurgical and Materials Transactions A.

[5]  Y. Mine,et al.  Quantification of Large Deformation with Punching in Dual Phase Steel and Change of its Microstructure : Part I: Proposal of the Quantification Technique of the Punching Damage of the Dual Phase Steel , 2016 .

[6]  S. Paul,et al.  Prediction of hole expansion ratio for automotive grade steels , 2014 .

[7]  Daniel Casellas,et al.  Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels , 2013 .

[8]  Jidong Kang,et al.  Void growth and coalescence in model materials investigated by high-resolution X-ray microtomography , 2013, International Journal of Fracture.

[9]  O. Hopperstad,et al.  Evaluation of constitutive models for textured aluminium alloys using plane-strain tension and shear tests , 2011 .

[10]  Mark Whittaker,et al.  The influence of mechanical and CO2 laser cut-edge characteristics on the fatigue life performance of high strength automotive steels , 2011 .

[11]  Jacques Besson,et al.  Effect of shear cutting on ductility of a dual phase steel , 2009 .

[12]  C. J. Tyne,et al.  Failure During Sheared Edge Stretching , 2008, Journal of Materials Engineering and Performance.

[13]  M. Larsson,et al.  The influence of mechanical and laser cutting on the fatigue strengths of carbon and stainless sheet steels , 2001 .

[14]  M. Finn,et al.  The numerical simulation of stretch flange forming , 2000 .

[15]  A. Nagasaka,et al.  Effects of Retained Austenite Parameters on Warm Stretch-flangeability in TRIP-aided Dual-phase Sheet Steels , 1999 .

[16]  R. G. Davies.  Edge cracking in high strength steels , 1983 .

[17]  Yukitaka Murakami,et al.  A Method of Stress Intensity Factor Calculation for the Crack Emanating from an Arbitrarily Shaped Hole or the Crack in the Vicinity of an Arbitrarily Shaped Hole , 1978 .

[18]  J. Kaufman.  Progress in Fracture Testing of Metallic Materials , 1970 .