DESIGN AND DEPLOYMENT OF A SPACE ELEVATOR

Abstract The space elevator was first proposed in the 1960s as a method of getting into space. The initial studies of a space elevator outlined the basic concept of a cable strung between Earth and space but concluded that no material available at the time had the required properties to feasibly construct such a cable. With the discovery of carbon nanotubes in 1991 it is now possible to realistically discuss the construction of a space elevator. Although currently produced only in small quantities, carbon nanotubes appear to have the strength-to-mass ratio required for this endeavor. However, fabrication of the cable required is only one of the challenges in construction of a space elevator. Powering the climbers, surviving micrometeor impacts, lightning strikes and low-Earth–orbit debris collisions are some of the problems that are now as important to consider as the production of the carbon nanotube cable. We consider various aspects of a space elevator and find each of the problems that this endeavor will encounter can be solved with current or near-future technology.

[1]  R. Smalley.  Crystalline Ropes of Metallic Carbon Nanotubes , 1999 .

[2]  M. Siegal,et al.  Synthesis of large arrays of well-aligned carbon nanotubes on glass , 1998, Science.

[3]  N. Grody,et al.  Remote sensing of atmospheric water content from satellites using microwave radiometry , 1976 .

[4]  P. Koert,et al.  Millimeter wave technology for space power beaming , 1992 .

[5]  Timothy C. Thompson,et al.  Development of an all-composite spacecraft bus for small satellite programs , 1994 .

[6]  William C. Priedhorsky,et al.  Detecting small debris using a ground-based photon counting detector , 1993, Defense, Security, and Sensing.

[7]  G. Backus,et al.  Sky-hook: old idea. , 1967, Science.

[8]  T. Ebbesen,et al.  Exceptionally high Young's modulus observed for individual carbon nanotubes , 1996, Nature.

[9]  Boris I. Yakobson,et al.  FULLERENE NANOTUBES : C1,000,000 AND BEYOND , 1997 .

[10]  William C. Brown,et al.  Beamed microwave power transmission and its application to space , 1992 .

[11]  A. J. Shuskus,et al.  Fabrication and test of an efficient photovoltaic cell for laser optical power transmission , 1992, IEEE Photonics Technology Letters.

[12]  W. Price,et al.  Designer's Guide to Radiation Effects on Materials for Use on Jupiter Fly-Bys and Orbiters , 1979, IEEE Transactions on Nuclear Science.

[13]  Jerome Pearson,et al.  The orbital tower: A spacecraft launcher using the Earth's rotational energy , 1975 .

[14]  L. Manning,et al.  Meteors in the Ionosphere , 1959, Proceedings of the IRE.

[15]  D. Gavel,et al.  ORION: Clearing near-Earth space debris using a 20-kW, 530-nm, Earth-based, repetitively pulsed laser , 1996 .

[16]  S. Egusa.  Anisotropy of radiation-induced degradation in mechanical properties of fabric-reinforced polymer-matrix composites , 1990 .

[17]  R. Smalley,et al.  Morphology and stability of growing multiwall carbon nanotubes , 1997 .

[18]  Arthur Charles Clarke.  The Fountains of Paradise , 1979 .

[19]  John M. Hall,et al.  Global Frequency and Distribution of Lightning as Observed by the Optical Transient Detector (OTD) , 1999 .

[20]  M. Dresselhaus,et al.  Large-scale and low-cost synthesis of single-walled carbon nanotubes by the catalytic pyrolysis of hydrocarbons , 1998 .

[21]  P. E. Glaser,et al.  An overview of the solar power satellite option , 1992 .

[22]  J. Isaacs,et al.  Satellite Elongation into a True "Sky-Hook" , 1966, Science.

[23]  Far‐field pattern of a coherently combined beam from large‐scale laser diode arrays , 1991 .

[24]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[25]  D. Heynderickx,et al.  Problems with models of the radiation belts , 1996 .