PWM switching frequency signal injection sensorless method in IPMSM

This paper describes how to extract the rotor position information using a PWM switching frequency voltage signal injection without position sensor in Interior Permanent Magnet Synchronous Machine (IPMSM). The frequency of injected voltage signal is increased to PWM switching frequency, and the dynamics of the sensorless control can be improved. Compared to conventional heterodyning process, the proposed method is simple to implement and appropriate for PWM switching frequency signal injection. The high frequency voltage signal can be injected in the stationary reference frame or in the estimated rotor reference frame. In this paper, two sensorless methods are proposed according to the injection reference frame. To verify the proposed methods, 5kHz voltage signal injection with 5kHz PWM switching frequency inverter system in both reference frames were implemented. The experimental results confirm the effectiveness of the proposed method.

[1]  M. Schroedl,et al.  Sensorless control of AC machines at low speed and standstill based on the "INFORM" method , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[2]  Robert D. Lorenz,et al.  Transducerless position and velocity estimation in induction and salient AC machines , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[3]  R. D. Lorenz,et al.  Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds , 1998 .

[4]  M. Ehsani,et al.  A novel position sensor elimination technique for the interior permanent-magnet synchronous motor drive , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[5]  Seung-Ki Sul,et al.  Implementation of sensorless vector control for super-high speed PMSM of turbo-compressor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[6]  Jung-Ik Ha,et al.  Sensorless field orientation control of an induction machine by high frequency signal injection , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[7]  R. Leidhold,et al.  Improved method for higher dynamics in sensorless position detection , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[8]  Seung-Ki Sul,et al.  Position sensorless operation of IPMSM with near PWM switching frequency signal injection , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[9]  Hirofumi Akagi,et al.  Implementation and position control performance of a position-sensorless IPM motor drive system based on magnetic saliency , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[10]  V. Blasko,et al.  Position estimation in salient PM synchronous motors based on PWM excitation transients , 2003 .

[11]  Peter Vas,et al.  Sensorless vector and direct torque control , 1998 .

[12]  Kozo Ide,et al.  Novel rotor position extraction based on carrier frequency component method (CFCM) using two reference frames for IPM drives , 2005, IEEE Transactions on Industrial Electronics.

[13]  Seung-Ki Sul,et al.  Unified voltage modulation technique for real time three-phase power conversion , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[14]  Nobuyuki Matsui,et al.  Sensorless operation of brushless DC motor drives , 1993, Proceedings of IECON '93 - 19th Annual Conference of IEEE Industrial Electronics.

[15]  M. Sanada,et al.  Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[16]  Kozo Ide,et al.  High bandwidth sensorless algorithm for AC machines based on square-wave type voltage injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[17]  Jung-Ik Ha,et al.  Sensorless rotor position estimation of an interior permanent-magnet motor from initial states , 2003 .

[18]  Ryoso Masaki,et al.  Development of a position sensorless control system on an electric vehicle driven by a permanent magnet synchronous motor , 2002, Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579).