Structural analysis of an elastomeric bellow seal in unsteady conditions: simulations and experiments

[1]  Guoqiang He,et al.  Storage life of silicone rubber sealing ring used in solid rocket motor , 2014 .

[2]  Yumrak Oh,et al.  Characteristics of a Tire Friction and Performances of a Braking in a High Speed Driving , 2014 .

[3]  Marco Rossi,et al.  Visco-Hyper-Pseudo-Elastic Characterization of a Fluoro-Silicone Rubber , 2014 .

[4]  Feng Guan,et al.  Effect of the friction coefficient for contact pressure of packer rubber , 2014 .

[5]  M. Baghani,et al.  Finite strain numerical analysis of elastomeric bushings under multi-axial loadings: a compressible visco-hyperelastic approach , 2013 .

[6]  Joon-Hyung Cho,et al.  Finite element estimation of hysteretic loss and rolling resistance of 3-D patterned tire , 2013 .

[7]  Per Erik Austrell,et al.  Modelling procedures and properties of rubber in rolling contact , 2013 .

[8]  D. Juhre,et al.  Finite element simulation of deformation behaviour of cellular rubber components , 2012 .

[9]  D. Amodio,et al.  Virtual Fields Method on Planar Tension Tests for Hyperelastic Materials Characterisation , 2011 .

[10]  André Fortin,et al.  Comparison of the performance of some finite element discretizations for large deformation elasticity problems , 2010 .

[11]  D. Amodio,et al.  Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methods , 2008 .

[12]  L. Brinson,et al.  Polymer Engineering Science and Viscoelasticity: An Introduction , 2007 .

[13]  P. Meier,et al.  Simulation of reiterated mechanical load of silicone rubber , 2007 .

[14]  Noureddine Benseddiq,et al.  A fracture criterion of rubber-like materials under plane stress conditions , 2006 .

[15]  Joo-Hyoung Choi,et al.  Estimation of dry road braking distance considering frictional energy of patterned tires , 2006 .

[16]  Y. Lu.  Effects of viscoelastic properties of engine cover sealing system on noise and vibration attenuation , 2006 .

[17]  Jung-Wuk Hong,et al.  On the Reliable Solution of Contact Problems in Engineering Design , 2004 .

[18]  François Peyraut,et al.  Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies , 2003 .

[19]  S. Youn,et al.  Finite element analysis and design optimization of rubber components for vibration isolation , 2003 .

[20]  R. Ogden,et al.  A pseudo–elastic model for the Mullins effect in filled rubber , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[21]  D. Nicholson,et al.  Finite Element Analysis of Hyperelastic Components , 1998 .

[22]  B. Persson.  On the theory of rubber friction , 1998 .

[23]  K. Bathe.  Finite Element Procedures , 1995 .

[24]  C. S. Tsai,et al.  Analytical model of viscoelastic dampers for seismic mitigation of structures , 1994 .

[25]  G. A. Haduch,et al.  The integration of analysis and testing for the simulation of the response of hyperrelastic materials , 1988 .

[26]  L. Mullins.  Effect of Stretching on the Properties of Rubber , 1948 .

[27]  E. Peña.  Computational aspects of the numerical modelling of softening, damage and permanent set in soft biological tissues , 2014 .

[28]  A. Gent.  Engineering with Rubber , 2012 .

[29]  G. Palmieri,et al.  Assessment of inverse procedures for the identification of hyperelastic material parameters , 2011 .

[30]  David T. Gethin,et al.  Experimental and numerical investigation into nonlinear deformation of silicone rubber pads during ink transfer process , 2008 .

[31]  Paolo Pennacchi,et al.  Advances in vibration control and diagnostics , 2006 .