A layout design method for an industrial park based on a novel arrangement algorithm – Consideration of pipe network and multiple hazard sources

Abstract The general layout design of an industrial park has a significant impact on safety, transportation, piping, and land occupation. Currently, the relevant studies are not mature, and most of the practical designs heavily rely on expertise. In this work, an optimization methodology is proposed to consider safety, piping connection, and occupied land simultaneously for the layout problem. An improved FLUTE algorithm is developed to optimize the pipe network arrangement. Quantitative risk analysis is employed to describe the safety aspect and the interaction among multiple hazard sources. A continuous model is used rather than a grid model to describe occupied land. The first case study illustrates that the improved FLUTE algorithm can find a better pipe network connection compared to previous algorithms with up to 38% reduction of cost. In the second case study, the layout-relevant cost from the proposed model is 6.3% lower than from a previous model, and the effectiveness of the model for multiple hazard sources is also illustrated. A Monte Carlo simulation is employed to test the optimal layout obtained from the proposed model. The results indicate the feasibility and the acceptability of accident consequences of the obtained layout. Consequently, the proposed model can significantly enhance safety and reduce capital cost for an industrial park.

[1]  Nima Khakzad,et al.  Process plant layout optimization with uncertainty and considering risk , 2017, Comput. Chem. Eng..

[2]  Ross E. Swaney,et al.  Optimization of process plant layout with pipe routing , 2005, Comput. Chem. Eng..

[3]  Zhenyu Wang,et al.  An Improved Hybrid Genetic Algorithm for Chemical Plant Layout Optimization with Novel Non-overlapping and Toxic Gas Dispersion Constraints , 2013 .

[4]  M. Sam Mannan,et al.  A MINLP approach for layout designs based on the domino hazard index , 2014 .

[5]  Mahmoud M. El-Halwagi,et al.  Optimization of facility location and reallocation in an industrial plant through a multi-annual framework accounting for economic and safety issues , 2015 .

[6]  Jeffrey S. Salowe,et al.  Spanning trees in hypergraphs with applications to steiner trees , 1998 .

[7]  Chris C. N. Chu,et al.  FLUTE: Fast Lookup Table Based Rectilinear Steiner Minimal Tree Algorithm for VLSI Design , 2008, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[8]  Patrick Linke,et al.  Optimal waste heat recovery and reuse in industrial zones , 2011 .

[9]  Mahmoud M. El-Halwagi,et al.  Synthesis of industrial park water reuse networks considering treatment systems and merged connectivity options , 2016, Comput. Chem. Eng..

[10]  Matthew J. Realff,et al.  Geographic and process information for chemical plant layout problems , 1999 .

[11]  Dedy Ng,et al.  New Approach To Optimizing the Facility Siting and Layout for Fire and Explosion Scenarios , 2011 .

[12]  Jeffrey S. Salowe,et al.  Closing the gap: near-optimal Steiner trees in polynomial time , 1994, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[13]  Chang Jun Lee,et al.  The Plant Layout Optimization Considering the Operating Conditions , 2017 .

[14]  Yufei Wang,et al.  An industrial facility layout design method considering energy saving based on surplus rectangle fill algorithm , 2018, Energy.

[15]  Wei Xie,et al.  A branch-and-bound algorithm for the continuous facility layout problem , 2008, Comput. Chem. Eng..

[16]  Lazaros G. Papageorgiou,et al.  An MILP Approach to Safe Process Plant Layout , 2004 .

[17]  Patrick Linke,et al.  Water integration in industrial zones: a spatial representation with direct recycle applications , 2014, Clean Technologies and Environmental Policy.

[18]  Xiao Feng,et al.  An area-wide layout design method considering piecewise steam piping and energy loss , 2017, Chemical Engineering Research and Design.

[19]  M. Sam Mannan,et al.  Optimal facility layout under toxic release in process facilities: A stochastic approach , 2010, Comput. Chem. Eng..

[20]  Mahmoud M. El-Halwagi,et al.  Siting Optimization of Facility and Unit Relocation with the Simultaneous Consideration of Economic and Safety Issues , 2014 .

[21]  Antonio Casimiro Caputo,et al.  Safety-based Process Plant Layout Using Genetic Algorithms , 2015 .

[22]  Marcus Brazil,et al.  Optimal Interconnection Trees in the Plane: Theory, Algorithms and Applications , 2015 .

[23]  Yan Wu,et al.  A chemical industry area-wide layout design methodology for piping implementation , 2017 .

[24]  A. R. Ciric,et al.  An MINLP Approach for Safe Process Plant Layout , 1996 .

[25]  M. Hanan,et al.  On Steiner’s Problem with Rectilinear Distance , 1966 .

[26]  Frank Pearson Lees,et al.  Loss prevention in the process industries : hazard identification, assessment, and control , 1980 .

[27]  Yan Wu,et al.  An industrial area layout design methodology considering piping and safety using genetic algorithm , 2017 .

[28]  José Luiz de Medeiros,et al.  Optimal determination of chemical plant layout via minimization of risk to general public using Monte Carlo and Simulated Annealing techniques , 2016 .

[29]  Ignacio E. Grossmann,et al.  A mathematical programming model for optimal layout considering quantitative risk analysis , 2014, Comput. Chem. Eng..