Experimental investigations in embedded sensing of composite components in aerospace vehicles

Abstract This paper summarizes the experimental investigations for smart embedded sensing in rotorcraft composite components. The overall objective of this effort was to develop smart embedded sensor technologies for condition based maintenance (CBM) for composite components in army rotorcraft. This paper presents the results of experimental investigations related to development and maturation of different types of embedded sensing solutions for structural health monitoring of composite components including Fiber Bragg Grating (FBG) sensors, phased and discrete piezoelectric sensor arrays. A discussion is provided relative to embedment of optical fibers into composites, and the results from embedded FBG sensors in a rotorcraft flexbeam subcomponent test specimen with seeded delamination subjected to dynamic loading. Likewise, results are analyzed of surface mounted phased array and embedded smart piezoelectric sensors in the flexbeam subcomponent test specimen with embedded delamination, subjected to fatigue cyclic loading. The paper also summarizes the lessons learned from efforts to nucleate and propagate delamination within composite components under dynamic cyclic loading.

[1]  Anindya Ghoshal,et al.  Damage Detection Testing on a Helicopter Flexbeam , 2001 .

[2]  Stephen M. Schultz,et al.  Nondestructive inspection of CFRP adhesively bonded joints using embedded FBG sensors , 2013, Defense, Security, and Sensing.

[3]  Joël Cugnoni,et al.  Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling , 2011 .

[4]  E. Archer,et al.  Internal strain measurement and cure monitoring of 3D angle interlock woven carbon fibre composites , 2014 .

[5]  Kara Peters,et al.  Optimization of Embedded Sensor Placement for Structural Health Monitoring of Composite Airframes , 2012 .

[6]  K. Peters,et al.  Damage Identification After Impact in Sandwich Composites Through Embedded Fiber Bragg Sensors , 2011 .

[7]  Chun-Gon Kim,et al.  Damage assessment in layered composites using spectral analysis and Lamb wave , 2007 .

[8]  Eric Udd.  Fiber optic smart structures , 1996 .

[9]  Eric Udd,et al.  Multidimensional strain field measurements using fiber optic grating sensors , 2000, Smart Structures.

[10]  A. Baker,et al.  Composite Materials for Aircraft Structures , 2004 .

[11]  David T. Fullwood,et al.  Piezoresistive in-situ strain sensing of composite laminate structures , 2015 .

[12]  Anindya Ghoshal,et al.  Development of Embedded Sensor Models in Composite Laminates for Structural Health Monitoring , 2004 .

[13]  Anindya Ghoshal,et al.  Development of embedded piezoelectric acoustic sensor array architecture , 2010, Microelectron. Reliab..

[14]  Jinsong Leng,et al.  Impact source identification in a carbon fiber reinforced polymer plate by using embedded fiber optic acoustic emission sensors , 2014 .

[15]  Hyun-Kyu Kang,et al.  Detection of Buckling and Crack Growth in the Delaminated Composites Using Fiber Optic Sensor , 2000 .

[16]  K. Peters.  Polymer optical fiber sensors—a review , 2010 .

[17]  G. Meltz,et al.  Formation of Bragg gratings in optical fibers by a transverse holographic method. , 1989, Optics letters.

[18]  D. Inman,et al.  Health monitoring and active control of composite structures using piezoceramic patches , 1999 .

[19]  Kara Peters,et al.  The role of embedded sensors in damage assessment in composite laminates , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  Victor Giurgiutiu,et al.  Finite element simulation of piezoelectric wafer active sensors for structural health monitoring with coupled-filed elements , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  Jeong-Beom Ihn,et al.  A Potential Link from Damage Diagnostics to Health Prognostics of Composites through Built-in Sensors , 2007 .

[22]  Hiroshi Asanuma,et al.  Proposal of an active composite with embedded sensor , 2002 .

[23]  Maria Augusta Neto,et al.  Low velocity impact damage evaluation in fiber glass composite plates using PZT sensors , 2013 .

[25]  In Lee,et al.  Damage evaluation and strain monitoring of composite plates using metal-coated FBG sensors under quasi-static indentation , 2014 .

[26]  Joël Cugnoni,et al.  Studies of hygrothermal degradation of a single fiber composite: An iterative approach with embedded optical sensors and numerical analysis , 2014 .

[27]  Anindya Ghoshal,et al.  Smart Embedded Sensors in Rotorcraft Composite Components for Condition Based Maintenance , 2010 .

[28]  A. Seyam,et al.  Effect of resin type on the signal integrity of an embedded perfluorinated polymer optical fiber , 2012 .

[29]  Kara Peters,et al.  Method for determination of crack bridging parameters using long optical fiber Bragg grating sensors , 2003 .

[30]  Stephen M. Schultz,et al.  Full-Spectral Interrogation of Fiber Bragg Grating Sensors Exposed to Steady-State Vibration , 2013 .

[31]  William B. Spillman,et al.  Fiber optic sensors : an introduction for engineers and scientists , 2011 .

[32]  Eric Udd,et al.  An overview of fiber‐optic sensors , 1995 .

[33]  Ying Xu.  Delamination detection at web/flange junction of I-section composite beam with fiber optical interferometer sensor , 2014 .

[34]  Gangbing Song,et al.  Strain monitoring in glass fiber reinforced composites embedded with carbon nanopaper sheet using Fiber Bragg Grating (FBG) sensors , 2009 .

[35]  Gary L. Anderson,et al.  Current and potential future research activities in adaptive structures: an ARO perspective , 2001 .

[36]  R. E. Guerjouma,et al.  Mechanical behaviour and health monitoring by acoustic emission of sandwich composite integrated by piezoelectric implant , 2014 .

[37]  David T. Fullwood,et al.  Strain monitoring of carbon fiber composite via embedded nickel nano-particles , 2012 .