Finite Element Model Updating of Machine-Tool Spindle Systems

The unknown joint dynamics are the main obstacle that limits the accuracy of the finite element (FE) model of a machine-tool spindle assembly. In this paper, an FE model updating method is proposed to assist industrial engineers in achieving a reliable model that can accurately represent the dynamic characteristics of machine-tool spindle systems. In the proposed FE model updating procedure, the iterative algorithm based on frequency response functions (FRFs) is applied. The joint stiffness parameters are identified through the iteration process, while the FE model is updated simultaneously. The proposed method was applied to update an existing coupled model of a machine-tool spindle system. The experimental results show that the identified joint stiffness parameters are acceptable and the dynamic behavior of the spindle mounted in the machine tool column is predicted reliably.

[1]  Weidong Zhu,et al.  Finite Element Modeling of Structures With L-Shaped Beams and Bolted Joints , 2011 .

[2]  Tao Yin,et al.  Damage Identification in Frame Structures Based on FE Model Updating , 2010 .

[3]  Paul Sas,et al.  Model updating using experimental frequency response functions: case studies , 1993 .

[4]  John E. Mottershead,et al.  Correction of Joint Stiffnesses and Constraints for Finite Element Models in Structural Dynamics , 1993 .

[5]  Y. Ren,et al.  Identification of joint properties of a structure using FRF data , 1995 .

[6]  Y. Ren,et al.  Identification of ’Effective’ Linear Joints Using Coupling and Joint Identification Techniques , 1998 .

[7]  Christian Brecher,et al.  Machine tool spindle units , 2010 .

[8]  Yusuf Altintas,et al.  Receptance coupling for end mills , 2003 .

[9]  Mehmet Imregun,et al.  Finite element model updating using frequency response function data: I. Theory and initial investigation , 1995 .

[10]  Tony L. Schmitz,et al.  Tool Point Frequency Response Prediction for High-Speed Machining by RCSA , 2001 .

[11]  Zhengjia He,et al.  Chatter stability of milling with speed-varying dynamics of spindles , 2012 .

[12]  Yusuf Altintas,et al.  Modeling of spindle-bearing and machine tool systems for virtual simulation of milling operations , 2007 .

[13]  Tony L. Schmitz,et al.  Predicting High-Speed Machining Dynamics by Substructure Analysis , 2000 .

[14]  John E. Mottershead,et al.  Model Updating In Structural Dynamics: A Survey , 1993 .

[15]  John E. Mottershead,et al.  Physical Realization of Generic-Element Parameters in Model Updating , 2002 .

[16]  Vikas Arora,et al.  Damped model updating using complex updating parameters , 2009 .

[17]  D. Ewins,et al.  Analytical model improvement using frequency response functions , 1994 .