Integrating Building Information Modeling and Health and Safety for Onsite Construction

Background Health and safety (H&S) on a construction site can either make or break a contractor, if not properly managed. The usage of Building Information Modeling (BIM) for H&S on construction execution has the potential to augment practitioner understanding of their sites, and by so doing reduce the probability of accidents. This research explores BIM usage within the construction industry in relation to H&S communication. Methods In addition to an extensive literature review, a questionnaire survey was conducted to gather information on the embedment of H&S planning with the BIM environment for site practitioners. Results The analysis of responses indicated that BIM will enhance the current approach of H&S planning for construction site personnel. Conclusion From the survey, toolbox talk will have to be integrated with the BIM environment, because it is the predominantly used procedure for enhancing H&S issues within construction sites. The advantage is that personnel can visually understand H&S issues as work progresses during the toolbox talk onsite.

[1]  Taeki Lee,et al.  Assessing safety culture in nuclear power stations , 2000 .

[2]  Swen Windahl,et al.  Using Communication Theory: An Introduction to Planned Communication , 1992 .

[3]  Kathryn Mearns,et al.  Skills, knowledge and senior managers' demonstrations of safety commitment , 2014 .

[4]  Thomas Mills,et al.  Research needs for Building Information Modeling for Construction Safety , 2010 .

[5]  Sherif Ali Mohtady Mohamed,et al.  SAFETY CLIMATE IN CONSTRUCTION SITE ENVIRONMENTS , 2002 .

[6]  Chris Harty,et al.  Implementing ‘Site BIM’: A case study of ICT innovation on a large hospital project , 2013 .

[7]  Charles M. Eastman,et al.  BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors , 2008 .

[8]  Jean Underwood,et al.  The application of information technology in the management of construction , 1999 .

[9]  Charles F. Hockett,et al.  A mathematical theory of communication , 1948, MOCO.

[10]  S. L. Tang,et al.  Safety cost optimization of building projects in Hong Kong , 1997 .

[11]  Godfaurd Adjaie John,et al.  Integrating BIM and Planning Software for Health and Safety Site Induction , 2011 .

[12]  S. Naoum.  Dissertation Research and Writing for Construction Students , 1997 .

[13]  Helen Lingard.  Design Risk Management: Contribution to Health and Safety , 2013 .

[14]  Jennifer Whyte,et al.  Safe construction through design: perspectives from the site team , 2013 .

[15]  Tony Baxendale,et al.  Construction design and management safety regulations in practice—progress on implementation , 2000 .

[16]  Julia T. Wood.  Communication theories in action : an introduction , 2004 .

[17]  Ghang Lee,et al.  A BIM- and sensor-based tower crane navigation system for blind lifts , 2012 .

[18]  Sang Joon Kim,et al.  A Mathematical Theory of Communication , 2006 .

[19]  Rafael Sacks,et al.  Requirements for building information modeling based lean production management systems for construction , 2010 .

[20]  Dana K. Smith,et al.  Building Information Modeling: A Strategic Implementation Guide for Architects, Engineers, Constructors, and Real Estate Asset Managers , 2009 .

[21]  D. Lezotte,et al.  Contractor safety practices and injury rates in construction of the Denver International Airport. , 1999, American journal of industrial medicine.

[22]  Peter Williams,et al.  Construction planning, programming, and control , 1998 .

[23]  Charles M. Eastman,et al.  Building Information Modeling (BIM) and Safety: Automatic Safety Checking of Construction Models and Schedules , 2013 .

[24]  Rafael Sacks,et al.  Spatial and Temporal Exposure to Safety Hazards in Construction , 2009 .

[25]  Michael Murray,et al.  Communication in Construction: Theory and Practice , 2006 .

[26]  김봉근,et al.  A Study on a Method for Tracking Lifting Paths of a Tower Crane using GPS in the BIM Environment , 2008 .

[27]  S. Keoki. Sears,et al.  Construction Project Management , 1972 .

[28]  Chris Harty,et al.  Implementing Building Information Modelling: a case study of the Barts and the London hospitals , 2010 .

[29]  T. Cox,et al.  The structure of employee attitudes to safety: A European example , 1991 .

[30]  Chimay J. Anumba,et al.  The use of visualisation to communicate design information to construction sites , 2000 .

[31]  Peter M. Chisnall,et al.  Questionnaire Design, Interviewing and Attitude Measurement , 1993 .

[32]  Alistair Cheyne,et al.  Assessing safety culture in offshore environments. , 2000 .

[33]  Raymond E. Levitt,et al.  Construction safety management , 1987 .

[34]  Jim Steel,et al.  Model interoperability in building information modelling , 2009, Software & Systems Modeling.

[35]  Vacharapoom Benjaoran,et al.  An integrated safety management with construction management using 4D CAD model , 2010 .

[36]  Meng-Han Tsai,et al.  A user-centered information and communication technology (ICT) tool to improve safety inspections , 2014 .

[37]  Raja R. A. Issa,et al.  Evaluating industry perceptions of building information modelling (BIM) impact on construction , 2009, J. Inf. Technol. Constr..

[38]  V. Grover,et al.  An assessment of survey research in POM: from constructs to theory , 1998 .

[39]  Richard West,et al.  Introducing Communication Theory: Analysis and Application , 2000 .

[40]  Jennifer Whyte,et al.  Construction safety and digital design: A review , 2012 .