Multi-Objective Optimal Sizing Design of a Diesel- PV-Wind-Battery Hybrid Power System in Colombia

This paper proposes a design of an isolated hybrid microgrid using an iterative optimization method: the branch and cut algorithm. The Colombian community of Unguia, found in the state of Choco, has been proposed for the microgrid design. The optimization objectives are the minimization of the grid operational costs and CO2 emissions, and ensuring 80 % of load demand coverage. The elements considered in the microgrid design are: Two Diesel generators that already exists in community, a battery bank, photovoltaic panels and wind turbines. In addition a comparison between the designs obtained with the branch and cut algorithm and the software HOMER is performed for the Unguia community.

[1]  C. L. Trujillo,et al.  Rural microgrids and its potential application in Colombia , 2015 .

[2]  Mahesh K. Mishra,et al.  Energy management of hybrid microgrid with hybrid energy storage system , 2015, 2015 International Conference on Renewable Energy Research and Applications (ICRERA).

[3]  Laia Ferrer-Martí,et al.  A MILP model to design hybrid wind-photovoltaic isolated rural electrification projects in developing countries , 2013, Eur. J. Oper. Res..

[4]  V. Buehner,et al.  Operation of rural distribution grids with intermittent generation in connected and island mode using the open source EMS solver SCIP , 2015, 2015 International Conference on Renewable Energy Research and Applications (ICRERA).

[5]  Julian Patino,et al.  Optimal Design for an Electrical Hybrid Microgrid in Colombia Under Fuel Price Variation , 2017 .

[6]  Miguel Antonio Ávila Angulo,et al.  Atlas de Radiación Solar Para La Región Cundiboyacense – Colombia Por Medio De Datos Radiométricos , 2015 .

[7]  Kashem M. Muttaqi,et al.  A review of technical challenges in planning and operation of remote area power supply systems , 2014 .

[8]  Mahmoud-Reza Haghifam,et al.  Study of Energy Control Strategies for a Standalone PV/FC/UC Microgrid in a Remote , 2017 .

[9]  Laia Ferrer-Martí,et al.  Optimizing microwind rural electrification projects. A case study in Peru , 2011, J. Glob. Optim..

[10]  R. Villafafila,et al.  Optimal sizing design of an isolated microgrid using loss of power supply probability , 2015, IREC2015 The Sixth International Renewable Energy Congress.

[11]  Josep M. Guerrero,et al.  Computational optimization techniques applied to microgrids planning: A review , 2015 .

[12]  K.G.T. Hollands,et al.  A time series model for Kt with application to global synthetic weather generation , 1988 .

[13]  Eklas Hossain,et al.  Implementation of hybrid energy storage systems to compensate microgrid instability in the presence of constant power loads , 2016, 2016 IEEE International Conference on Renewable Energy Research and Applications (ICRERA).

[14]  Bogaraj Thirumalaisamy,et al.  A Novel Energy Management Scheme using ANFIS for Independent Microgrid , 2016 .

[15]  Akbar Maleki,et al.  Optimal sizing of a PV/wind/diesel system with battery storage for electrification to an off-grid remote region: A case study of Rafsanjan, Iran , 2014 .

[16]  D. John Morrow,et al.  Effect of weather and the hybrid energy storage on the availability of standalone microgrid , 2016, International Journal of Renewable Energy Research.

[17]  Luciana Martinez,et al.  Optimization of a Hybrid Energy System for an Isolated Community in Brazil , 2016 .

[18]  Natalia Esteve Gómez Energización de las zonas no interconectadas a partir de las energías renovables solar y eólica , 2011 .

[19]  Semaria Ruiz Alvarez,et al.  Optimal design of a diesel-PV-wind system with batteries and hydro pumped storage in a Colombian community , 2017, 2017 IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA).

[20]  Mahesh K. Mishra,et al.  Power management based on the operating conditions of grid, mircogrid and hybrid storage , 2015, 2015 International Conference on Renewable Energy Research and Applications (ICRERA).

[21]  M. Matos,et al.  Optimization of Pumped Storage Capacity in an Isolated Power System With Large Renewable Penetration , 2008, IEEE Transactions on Power Systems.

[22]  Rachid Ibtiouen,et al.  Optimal sizing method for stand-alone hybrid PV/wind power generation system , 2010 .

[23]  Ali I. Maswood,et al.  A novel maximum power point tracking algorithm for a stand-alone unity power factor wind energy conversion system , 2013, 2013 International Conference on Renewable Energy Research and Applications (ICRERA).