Condition monitoring of a wind turbine drive train based on its power dependant vibrations

Increasing the reliability and the downtime of wind turbines is critical to minimise the cost of energy (COE) in the wind sector, especially for offshore wind turbines. Due to the high impact that gearboxes and generator downtimes create on wind turbines, reliable and cost-effective condition monitoring systems (CMS) for the drive train are a great concern to the wind industry. This manuscript presents an approach for condition health monitoring and fault diagnosis in wind turbine gearboxes and generators by means of analysing the power dependant vibrations gathered. This methodology is based on the establishment of the normal operation boundaries for carrying out the identification of deviations related to a defect. The validity of the baseline is studied using q-factor and probability of detection (POD) concepts. Given the nonlinear and nonstationary nature of the faulty vibration signals, envelope analysis is proposed as a demodulation technique to be applied to the signals, prior to the frequency response being extracted. The methodology is validated by field trials in a WINDMASTER300 wind turbine. Baselines for the generator and gearbox were produced as a tool to detect future faults developed within the turbine. Envelope analysis makes the identification of the vibrational frequencies representative of failure very likely.

[1]  Christopher Durugbo,et al.  Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes , 2015 .

[2]  W. J. Staszewski,et al.  Application of the Wavelet Transform to Fault Detection in a Spur Gear , 1994 .

[3]  Christopher Durugbo,et al.  Performance assessment of wind turbine gearboxes using in-service data: Current approaches and future trends , 2015 .

[4]  Paolo Pennacchi,et al.  Condition Monitoring and Diagnostics of Wind Turbines: A Survey , 2014 .

[5]  J. Heggset,et al.  Challenges in the reliability and maintainability data collection for offshore wind turbines , 2011 .

[6]  Shahrul Kamaruddin,et al.  An overview of time-based and condition-based maintenance in industrial application , 2012, Comput. Ind. Eng..

[7]  Yingning Qiu,et al.  Wind turbine condition monitoring: technical and commercial challenges , 2014 .

[8]  Yanhui Feng,et al.  Discrete wavelet-based thresholding study on acoustic emission signals to detect bearing defect on a rotating machine , 2006 .

[9]  Mayorkinos Papaelias,et al.  Condition monitoring of wind turbines: Techniques and methods , 2012 .

[10]  Robert B. Randall,et al.  Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation , 2009 .

[11]  Qiang Yang,et al.  On prognosis of wind turbine faults based on nonlinear mixed vibration signals: A PSO based EMD and KICA combined approach , 2016, 2016 12th World Congress on Intelligent Control and Automation (WCICA).

[12]  Ting Xu,et al.  RESEARCH ON WIND TURBINE GEARBOX FAULT WARNING METHOD UNDER VARIABLE OPERATIONAL CONDITION , 2014 .

[13]  Tongdan Jin,et al.  Condition based maintenance optimization for wind power generation systems under continuous monitoring , 2011 .

[14]  Guolin He,et al.  A novel order tracking method for wind turbine planetary gearbox vibration analysis based on discrete spectrum correction technique , 2016 .

[15]  Radoslaw Zimroz,et al.  Vibration condition monitoring of planetary gearbox under varying external load , 2009 .

[16]  Michael I. Friswell,et al.  Defect Diagnosis for Rolling Element Bearings Using Acoustic , 2009 .

[17]  F. Guillet,et al.  Modeling and Detection of Localized Tooth Defects in Geared Systems , 2001 .

[18]  Mengyan Nie,et al.  Review of condition monitoring and fault diagnosis technologies for wind turbine gearbox , 2013 .

[19]  S. Sheng,et al.  Investigation of Various Wind Turbine Drivetrain Condition Monitoring Techniques (Presentation) , 2010 .

[20]  Mayorkinos Papaelias,et al.  Identification of critical components of wind turbines using FTA over the time , 2016 .

[21]  Slim Soua,et al.  Determination of the combined vibrational and acoustic emission signature of a wind turbine gearbox and generator shaft in service as a pre-requisite for effective condition monitoring , 2013 .

[22]  Keith Worden,et al.  Structural Health Monitoring: from Structures to Systems-of-Systems , 2015 .

[23]  David,et al.  A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears , 2007 .

[24]  David He,et al.  Gearbox Tooth Cut Fault Diagnostics Using Acoustic Emission and Vibration Sensors — A Comparative Study , 2014, Sensors.

[25]  David,et al.  Observations of acoustic emission activity during gear defect diagnosis , 2003 .

[26]  Antoine Tahan,et al.  Power curve monitoring using weighted moving average control charts , 2016 .

[27]  Allan May,et al.  Economic analysis of condition monitoring systems for offshore wind turbine sub-systems , 2014 .

[28]  David Lane,et al.  Predictive diagnosis for offshore wind turbines using holistic condition monitoring , 2010, OCEANS 2010 MTS/IEEE SEATTLE.

[29]  Y. H. Liu,et al.  Extraction of Gear Fault Feature Based on the Envelope and Time-frequency Image of S Transformation , 2013 .

[30]  S. Iniyan,et al.  Performance, reliability and failure analysis of wind farm in a developing Country , 2010 .

[31]  P. D. McFadden,et al.  Detecting Fatigue Cracks in Gears by Amplitude and Phase Demodulation of the Meshing Vibration , 1986 .

[32]  F. Guillet,et al.  USE OF THE MOVING CEPSTRUM INTEGRAL TO DETECT AND LOCALISE TOOTH SPALLS IN GEARS , 2001 .

[33]  G. R. Sabareesh,et al.  Design and development of a wind turbine test rig for condition monitoring studies , 2015, 2015 International Conference on Industrial Instrumentation and Control (ICIC).

[34]  Andrew Kusiak,et al.  The prediction and diagnosis of wind turbine faults , 2011 .

[35]  V. Moorthy,et al.  Magneto-Acoustic Emission and Magnetic Barkhausen Emission for Case Depth Measurement in En36 Gear Steel , 2009, IEEE Transactions on Magnetics.

[36]  Peter Tavner,et al.  Survey of commercially available condition monitoring systems for wind turbines. , 2014 .

[37]  Fouad Slaoui-Hasnaoui,et al.  Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges , 2014 .