Influence of Ethylene Plasma Treatment of Agave Fiber on the Cellular Morphology and Compressive Properties of Low-Density Polyethylene/Ethylene Vinyl Acetate Copolymer/Agave Fiber Composite Foams

Agave fibers (AF) were incorporated either pristine (AFp) or surface treated by ethylene plasma (AFm) in low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) blends at a ratio of 1 : 1 and foamed by chemical means. The role of the AF content (3, 6, 9, 12, and 15 wt.%) and its surface modification on the cellular morphology and mechanical properties of LDPE/EVA/AF foams under compression is investigated herein. Fourier transform-infrared spectroscopy, contact angle, and water suspension of AF suggest that plasma treatment using ethylene successfully modifies the surface nature of AF from hydrophilic to hydrophobic. AF and the surface treatment have an important role on the morphological properties of the foams. Composite foams reinforced with 12 wt.% AFm exhibited the highest mechanical properties improvements. At this fiber content, the composite foams enhanced 30% of the compressive modulus and 23% of the energy absorption under compression with respect to the neat polymer blend foam, as a result to the formation of more uniform cells with smaller size and the enhancement of compatibility and spatial distribution of the AFm in the polymer composite foams due to thin clusters of polyethylene-like polymer deposited on the AF surface.

[1]  E. Hernández‐Hernández,et al.  Films made from plasma-modified corn starch: Chemical, mechanical and barrier properties. , 2020, Carbohydrate polymers.

[2]  P. Stagnaro,et al.  Chemical modification of hemp fibres by plasma treatment for eco-composites based on biodegradable polyester , 2019, Journal of Materials Science.

[3]  Sabu Thomas,et al.  Effect of plasma modification of polyethylene on natural fibre composites prepared via rotational moulding , 2019, Composites Part B: Engineering.

[4]  E. Hernández‐Hernández,et al.  Influence of gelatinization process and HMDSO plasma treatment on the chemical changes and water vapor permeability of corn starch films. , 2019, International journal of biological macromolecules.

[5]  R. Simão,et al.  Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification , 2019, Composites Part B: Engineering.

[6]  E. Hernández‐Hernández,et al.  Surface Modification of Carbon Nanofibers and Graphene Platelets Mixtures by Plasma Polymerization of Propylene , 2017 .

[7]  M. Karaman,et al.  Chemical and plasma surface modification of lignocellulose coconut waste for the preparation of advanced biobased composite materials. , 2017, Carbohydrate polymers.

[8]  Ernesto Hernández Hernández,et al.  Plasma Treatment of Agave Fiber Powder and Its Effect on the Mechanical and Thermal Properties of Composites Based on Polyethylene , 2016 .

[9]  D. Rodrigue,et al.  Preparation and characterization of multilayer foamed composite by rotational molding , 2016 .

[10]  V. Altstädt,et al.  Microcellular to nanocellular polymer foams : Progress(2004–2015) and future directions ; A review , 2015 .

[11]  Hossam E. Emam,et al.  Cotton fabrics with UV blocking properties through metal salts deposition , 2015 .

[12]  E. Hernández‐Hernández,et al.  Nanocomposites Prepared with High Density Polyethylene and Carbon Nanofibers Modified by Ethylene Plasma , 2015 .

[13]  R. Santana,et al.  Comparative study between poly(ethylene-co-vinyl acetate) - EVA expanded composites filled with banana fiber and wood flour , 2014 .

[14]  Chul B. Park,et al.  Dispersed polypropylene fibrils improve the foaming ability of a polyethylene matrix , 2014 .

[15]  T. Kuboki.  Foaming behavior of cellulose fiber-reinforced polypropylene composites in extrusion , 2014 .

[16]  J. Martínez-Gómez,et al.  Improving the bonding between henequen fibers and high density polyethylene using atmospheric pressure ethylene-plasma treatments , 2014 .

[17]  R. Rajasekar,et al.  Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites , 2013 .

[18]  D. Rodrigue,et al.  Morphology and properties of polystyrene/agave fiber composites and foams , 2013 .

[19]  V. Fernández,et al.  Effect of the cellulose of Agave tequilana Weber onto the mechanical properties of foamed and unfoamed polypropylene composites , 2013, Polymer Bulletin.

[20]  A. S. Luyt,et al.  Effects of organic peroxide and polymer chain structure on morphology and thermal properties of sisal fibre reinforced polyethylene composites , 2012 .

[21]  J. Månson,et al.  The potential of wood fibers as reinforcement in cellular biopolymers , 2012 .

[22]  D. Rodrigue,et al.  Microcellular Agave Fibre-High Density Polyethylene Composites Produced by Injection Molding , 2012 .

[23]  V. González-González,et al.  Surface Modification of Nanoclays by Plasma Polymerization of Ethylene , 2011 .

[24]  Jörg Friedrich,et al.  Mechanisms of Plasma Polymerization – Reviewed from a Chemical Point of View , 2011 .

[25]  M. Hosseini,et al.  Effect of clay dispersion on the cell structure of LDPE/clay nanocomposite foams , 2011 .

[26]  M. Talaeipour,et al.  CELL MORPHOLOGY AND PHYSICO-MECHANICAL PROPERTIES OF HDPE/EVA/RICE HULL HYBRID FOAMED COMPOSITES , 2011 .

[27]  G. Íñiguez,et al.  Utilización de subproductos de la industria tequilera: Parte 10. Caracterización de diferentes etapas de descomposición del bagazo de Agave tequilana Webber usando espectroscopía FTIR, análisis termogravimétrico y microscopía electrónica de barrido , 2011 .

[28]  R. Manríquez,et al.  UTILIZATION OF BY-PRODUCTS FROM THE TEQUILA INDUSTRY . PART 10 : CHARACTERIZATION OF DIFFERENT DECOMPOSITION STAGES OF Agave tequilana WEBBER BAGASSE USING FTIR SPECTROSCOPY , THERMOGRAVIMETRIC ANALYSIS AND SCANNING ELECTRON MICROSCOPY , 2011 .

[29]  H. Azizi,et al.  Morphology and tensile properties of crosslinked nanocomposite foams of low‐density polyethylene and poly(ethylene‐co‐vinyl acetate) blends , 2010 .

[30]  A. Herrera‐Gomez,et al.  Postconsumer high-density polyethylene/agave fiber foamed composites coated with chitosan for the removal of heavy metals , 2010 .

[31]  H. Azizi,et al.  An investigation on the correlation between rheology and morphology of nanocomposite foams based on low-density polyethylene and ethylene vinyl acetate blends , 2010 .

[32]  R. B. McClurg.  Design criteria for ideal foam nucleating agents , 2004 .

[33]  D. Bhattacharyya,et al.  Effects of plasma treatment in enhancing the performance of woodfibre-polypropylene composites , 2004 .

[34]  V. Djoković,et al.  Composites of linear low density polyethylene and short sisal fibres: The effects of peroxide treatment , 2004 .

[35]  Denis Rodrigue,et al.  High‐density polyethylene foams. I. Polymer and foam characterization , 2003 .

[36]  M. Nanny,et al.  Characterization and comparison of hydrophobic neutral and hydrophobic acid dissolved organic carbon isolated from three municipal landfill leachates. , 2002, Water research.

[37]  B. Kokta,et al.  The effect of crosslinking on properties of low-density polyethylene filled with organic filler , 2001 .

[38]  A. Błędzki,et al.  Composites reinforced with cellulose based fibres , 1999 .

[39]  M. Grube,et al.  Comparative investigation of the macromolecular composition of mycelia forms Thielavia terrestris by infrared spectroscopy , 1999 .

[40]  O. Faix,et al.  Classification of Lignins from Different Botanical Origins by FT-IR Spectroscopy , 1991 .