Quantitative assessment of alkali-reactive aggregate mineral content through XRD using polished sections as a supplementary tool to RILEM AAR-1 (petrographic method)

The mineral content of 5 aggregate samples from 4 different countries, including reactive and non-reactive aggregate types, was assessed quantitatively by X-ray diffraction (XRD) using polished sections. Additionally, electron probe microanalyzer (EPMA) mapping and cathodoluminescence (CL) were used to characterize the opal-CT identified in one of the aggregate samples. Critical review of results from polished sections against traditionally powdered specimen has demonstrated that for fine-grained rocks without preferred orientation the assessment of mineral content by XRD using polished sections may represent an advantage over traditional powder specimens. Comparison of data on mineral content and silica speciation with expansion data from PARTNER project confirmed that the presence of opal-CT plays an important role in the reactivity of one of the studied aggregates. Used as a complementary tool to RILEM AAR-1, the methodology suggested in this paper has the potential to improve the strength of the petrographic method.

[1]  Vander Voort,et al.  Metallography, principles and practice , 1984 .

[2]  D. W. Humphries.  The preparation of thin sections of rocks, minerals, and ceramics , 1992 .

[3]  D. W. Hobbs,et al.  B-TC 106-3-Detection of potential alkali-reactivity of aggregates-Method for aggregate combinations using concrete prisms , 2000 .

[4]  B. Sørensen,et al.  Assessment of Individual ASR-Aggregate Particles by XRD , 2012 .

[5]  F. P. Bowden,et al.  Physical Properties of Surfaces. IV. Polishing, Surface Flow and the Formation of the Beilby Layer , 1937 .

[6]  L. Alexander,et al.  X-Ray diffraction procedures for polycrystalline and amorphous materials , 1974 .

[7]  S. Chatterji,et al.  An accelerated method for the detection of alkali-aggregate reactivities of aggregates , 1978 .

[8]  M. Broekmans,et al.  Structural properties of quartz and their potential role for ASR , 2004 .

[9]  R. Jenkins,et al.  A practical guide for the preparation of specimens for x-ray fluorescence and x-ray diffraction analysis , 1998 .

[10]  J. Götze,et al.  Progress in application of cathodoluminescence (CL) in sedimentary petrology , 2003 .

[11]  I. Sims,et al.  RILEM recommended test method AAR-1: Detection of potential alkali-reactivity of aggregates—Petrographic method , 2003 .

[12]  R. Smoluchowski,et al.  Elements of X‐Ray Diffraction , 1957 .

[13]  Deane K. Smith,et al.  Opal, cristobalite, and tridymite: Noncrystallinity versus crystallinity, nomenclature of the silica minerals and bibliography , 1998, Powder Diffraction.

[14]  C. Brime.  Interstratified Clay Minerals: Origin, Characterization and Geochemical Significance , 2011 .

[15]  Ingmar Borchers,et al.  The EU "PARTNER" Project - European standard tests to prevent alkali reactions in aggregates : Final results and recommendations , 2010 .

[16]  Deane K. Smith.  Evaluation of the detectability and quantification of respirable crystalline silica by X-ray powder diffraction methods , 1997, Powder Diffraction.

[17]  D. W. Hobbs,et al.  Alkali-silica reaction in concrete , 1988 .

[18]  A. D. Jensen,et al.  A simple chemical test method for the detection of alkali-silica reactivity of aggregates , 1988 .

[19]  Donna L. Whitney,et al.  Abbreviations for names of rock-forming minerals , 2010 .

[20]  M. Broekmans,et al.  The alkali-silica reaction: mineralogical and geochemical aspects of some Dutch concretes and Norwegian mylonites , 2002 .

[21]  M. Plötze,et al.  Origin, spectral characteristics and practical applications of the cathodoluminescence (CL) of quartz – a review , 2001 .

[22]  E. Garcia-Diaz,et al.  ASR Pessimum Behaviour of Siliceous Limestone Aggregates , 2010 .

[23]  R. Howie,et al.  An Introduction to the Rock-Forming Minerals , 1966 .

[24]  R. Reynolds,et al.  Sample preparation for X-ray diffraction , 1989 .