Design and formation of SiC (0001)/SiO2 interfaces via Si deposition followed by low-temperature oxidation and high-temperature nitridation

We report an effective approach to reduce defects at a SiC/SiO2 interface. Since oxidation of SiC may inevitably lead to defect creation, the idea is to form the interface without oxidizing SiC. Our method consists of four steps: (i) H2 etching of SiC, (ii) Si deposition, (iii) low-temperature (∼750 °C) oxidation of Si to form SiO2, and (iv) high-temperature (∼1600 °C) N2 annealing to introduce nitrogen atoms. The interface state density estimated by a high (1 MHz)–low method is in the order of 1010 cm−2 eV−1, two orders of magnitude lower than that of an interface formed by SiC oxidation.

[1]  T. Umeda,et al.  Interface carbon defects at 4H-SiC(0001)/SiO2 interfaces studied by electron-spin-resonance spectroscopy , 2018, Applied Physics Letters.

[2]  H. Yoshioka,et al.  Characterization of SiO 2 /SiC interface states and channel mobility from MOSFET characteristics including variable-range hopping at cryogenic temperature , 2018 .

[3]  T. Kimoto,et al.  Carbon Ejection from a SiO2/SiC(0001) Interface by Annealing in High-Purity Ar , 2017, 1705.00814.

[4]  Y. Matsushita,et al.  A Novel Intrinsic Interface State Controlled by Atomic Stacking Sequence at Interfaces of SiC/SiO2. , 2017, Nano letters.

[5]  Heiji Watanabe,et al.  Ultrahigh-temperature rapid thermal oxidation of 4H-SiC(0001) surfaces and oxidation temperature dependence of SiO2/SiC interface properties , 2016 .

[6]  Heiji Watanabe,et al.  Insight into metal-enhanced oxidation using barium on 4H-SiC surfaces , 2016 .

[7]  Heiji Watanabe,et al.  Impact of rapid cooling process in ultrahigh-temperature oxidation of 4H-SiC(0001) , 2016 .

[8]  Heiji Watanabe,et al.  Study of SiO2/4H-SiC interface nitridation by post-oxidation annealing in pure nitrogen gas , 2015 .

[9]  T. Fuyuki,et al.  Threshold Voltage Instability in 4H-SiC MOSFETs With Phosphorus-Doped and Nitrided Gate Oxides , 2015, IEEE Transactions on Electron Devices.

[10]  S. Dhar,et al.  High mobility 4H-SiC (0001) transistors using alkali and alkaline earth interface layers , 2014 .

[11]  Hiroshi Yano,et al.  Improved Channel Mobility in 4H-SiC MOSFETs by Boron Passivation , 2014, IEEE Electron Device Letters.

[12]  J. Cooper,et al.  Fundamentals of Silicon Carbide Technology: Growth, Characterization, Devices and Applications , 2014 .

[13]  K. Kita,et al.  Fabrication of SiO2/4H-SiC (0001) interface with nearly ideal capacitance-voltage characteristics by thermal oxidation , 2014 .

[14]  Tsunenobu Kimoto,et al.  Accurate evaluation of interface state density in SiC metal-oxide-semiconductor structures using surface potential based on depletion capacitance , 2012 .

[15]  S. Dhar,et al.  High electron mobility due to sodium ions in the gate oxide of SiC-metal-oxide-semiconductor field-effect transistors , 2011 .

[16]  T. Fuyuki,et al.  Removal of near-interface traps at SiO2/4H–SiC (0001) interfaces by phosphorus incorporation , 2010 .

[17]  Hiroshi Yano,et al.  Improved Inversion Channel Mobility in 4H-SiC MOSFETs on Si Face Utilizing Phosphorus-Doped Gate Oxide , 2010, IEEE Electron Device Letters.

[18]  Thomas Frauenheim,et al.  The mechanism of defect creation and passivation at the SiC/SiO2 interface , 2007 .

[19]  H. Ólafsson,et al.  A strong reduction in the density of near-interface traps at the SiO2∕4H‐SiC interface by sodium enhanced oxidation , 2007 .

[20]  S. Dhar,et al.  Bonding at the SiC-SiO2 interface and the effects of nitrogen and hydrogen. , 2007, Physical review letters.

[21]  Tsunenobu Kimoto,et al.  Interface Properties of Metal–Oxide–Semiconductor Structures on 4H-SiC{0001} and (1120) Formed by N2O Oxidation , 2005 .

[22]  Andre Stesmans,et al.  Mechanisms responsible for improvement of 4H-SiC/SiO2 interface properties by nitridation , 2003 .

[23]  John W. Palmour,et al.  N2O Processing Improves the 4H-SiC:SiO2 Interface , 2002 .

[24]  S. Dimitrijev,et al.  Effects of nitridation in gate oxides grown on 4H-SiC , 2001 .

[25]  E. Arnold,et al.  Effect of interface states on electron transport in 4H-SiC inversion layers , 2001 .

[26]  O. W. Holland,et al.  Improved inversion channel mobility for 4H-SiC MOSFETs following high temperature anneals in nitric oxide , 2001, IEEE Electron Device Letters.

[27]  Anant K. Agarwal,et al.  Interface trap profile near the band edges at the 4H-SiC/SiO2 interface , 2000 .

[28]  H. B. Harrison,et al.  Investigation of nitric oxide and Ar annealed SiO2/SiC interfaces by x-ray photoelectron spectroscopy , 1999 .

[29]  Tsunenobu Kimoto,et al.  Step-controlled epitaxial growth of SiC: High quality homoepitaxy , 1997 .

[30]  Michael Bassler,et al.  “Carbon cluster model” for electronic states at interfaces , 1997 .

[31]  V. Afanas’ev,et al.  Intrinsic SiC/SiO2 Interface States , 1997 .

[32]  B. J. Baliga,et al.  Power semiconductor device figure of merit for high-frequency applications , 1989, IEEE Electron Device Letters.

[33]  M. Kusko,et al.  A Reliable Technology for Advanced SiC-MOS Devices Based on Fabrication of High Quality Silicon Oxide Layers by Converting a-Si , 2019, IEEE Journal of the Electron Devices Society.

[34]  H. Yoshioka,et al.  N-channel field-effect mobility inversely proportional to the interface state density at the conduction band edges of SiO2/4H-SiC interfaces , 2015 .