Experimental analyses of the spatial varying temperature development of type-IV hydrogen pressure vessels in cyclic tests considering different length to diameter ratios

[1]  K. Drechsler,et al.  Hydrogen permeability of thermoplastic composites and liner systems for future mobility applications , 2023, Composites Part A: Applied Science and Manufacturing.

[2]  Michael J. Hoffmann,et al.  Temperature-dependent fracture behavior of towpreg epoxy resins for cryogenic liquid hydrogen composite vessels: The influence of polysiloxane tougheners on the resin yield behavior , 2022, Polymer Testing.

[3]  M. Geers,et al.  The influence of the internal pressure on the residual strength of composite-overwrapped pressure vessels subjected to external contact loading , 2022, Composite Structures.

[4]  Daniel Hissel,et al.  Hydrogen storage technologies for stationary and mobile applications: Review, analysis and perspectives , 2021 .

[5]  H. Roh,et al.  A predictive modeling tool for damage analysis and design of hydrogen storage composite pressure vessels , 2021 .

[6]  P. Xu,et al.  Influences of filling process on the thermal-mechanical behavior of composite overwrapped pressure vessel for hydrogen , 2020 .

[7]  T. Jones,et al.  Permeation of a Range of Species through Polymer Layers under Varying Conditions of Temperature and Pressure: In Situ Measurement Methods , 2019, Polymers.

[8]  D. Baraldi,et al.  Effects of some key-parameters on the thermal stratification in hydrogen tanks during the filling process , 2019, International Journal of Hydrogen Energy.

[9]  H. Baier,et al.  On the Temperature-Dependent Non-Isosensitive Mechanical Behavior of Polyethylene in a Hydrogen Pressure Vessel , 2019, Procedia Manufacturing.

[10]  D. Krause,et al.  Fatigue damage model for fibre-reinforced polymers at different temperatures considering stress ratio effects , 2018 .

[11]  D. Baraldi,et al.  The temperature evolution in compressed gas filling processes: A review , 2018 .

[12]  D. Saury,et al.  Optimization of hydrogen vehicle refuelling requirements , 2017 .

[13]  Hervé Barthelemy,et al.  Hydrogen storage: Recent improvements and industrial perspectives , 2017 .

[14]  D. Baraldi,et al.  CFD simulations of filling and emptying of hydrogen tanks , 2017 .

[15]  P. Moretto,et al.  Influence of the gas injector configuration on the temperature evolution during refueling of on-board hydrogen tanks , 2016 .

[16]  I. Simonovski,et al.  Thermal simulations of a hydrogen storage tank during fast filling , 2015 .

[17]  P. Moretto,et al.  Effect of precooled inlet gas temperature and mass flow rate on final state of charge during hydrogen vehicle refueling , 2015 .

[18]  P. Moretto,et al.  JRC reference data from experiments of on-board hydrogen tanks fast filling , 2014 .

[19]  Peter Woodfield,et al.  Estimation of temperature change in practical hydrogen pressure tanks being filled at high pressures of 35 and 70 MPa , 2012 .

[20]  Igor Emri,et al.  The Effect of Temperature and Pressure on the Mechanical Properties of Thermo- and/or Piezorheologically Simple Polymeric Materials in Thermodynamic Equilibrium – A Critical Review , 2002 .

[21]  Sun-Kyu Kim,et al.  Effects of temperature on impact damages in CFRP composite laminates , 2001 .