RILEM TC 203-RHM: Repair mortars for historic masonry

Mortar has been in use for many thousands of years and is integral to most masonry construction. Its use is widespread in every culture where masonry is constructed. It is present in the majority of the global built cultural heritage, and is therefore a major consideration in building conservation. The effective design of a mortar for repairing masonry depends on a clear understanding of its function. The main functional uses of mortar in masonry are classified as bedding, pointing, grout, render, plaster, flooring and mortars for surface repairs. The requirements that each type of mortar must meet in service depend on its environmental exposure and its role in the masonry element that it is found within (e.g. issues such as historic authenticity, aesthetics, resistance to moisture ingress, structural integrity, and service life). Technical requirements such as adhesion, strength, elasticity, water and vapour transmittance, drying behaviour, thermal dilatation, ability to deal with salt contamination and freeze–thaw cycling, and its aesthetic properties can be quantified. Mortar properties can be adjusted by varying ingredients and their proportions, to meet the differing technical requirements

[1]  Alan Mark Forster,et al.  Building conservation philosophy for masonry repair: part 1 – “ethics” , 2010 .

[2]  Bernhard Middendorf,et al.  Physico-mechanical and microstructural characteristics of historic and restoration mortars based on gypsum: current knowledge and perspective , 2002, Geological Society, London, Special Publications.

[3]  Bernard Melchior Feilden,et al.  Conservation of historic buildings , 1984 .

[4]  Roman Kozłowski,et al.  Roman cements - belite cements calcined at low temperature , 2009 .

[5]  Tc Rhm,et al.  RILEM TC 203-RHM: Repair mortars for historic masonry , 2009, Materials and Structures.

[6]  Ioanna Papayianni,et al.  Investigative methods for the characterisation of historic mortars—Part 1: Mineralogical characterisation , 2005 .

[7]  M. Collepardi,et al.  Degradation and restoration of masonry walls of historical buildings , 1990 .

[8]  Maria Rosa Valluzzi,et al.  On the vulnerability of historical masonry structures: analysis and mitigation , 2007 .

[9]  A. Hendry.  Masonry walls: materials and construction , 2001 .

[10]  Luigia Binda,et al.  Mechanical behaviour of multiple-leaf stone masonry: experimental research , 2003 .

[11]  Alf Waldum,et al.  Introduction to requirements for and functions and properties of repair mortars , 2005 .

[12]  Pamela B. Vandiver,et al.  The Beginnings of Pyrotechnology, Part II: Production and Use of Lime and Gypsum Plaster in the Pre-Pottery Neolithic Near East , 1988 .

[13]  John Hughes,et al.  A Short History of the Use of Lime as a Building Material Beyond Europe and North America , 2012 .

[14]  Jan Elsen,et al.  Nineteenth century hydraulic restoration mortars in the Saint Michael's Church (Leuven, Belgium): Natural hydraulic lime or cement? , 2001 .

[15]  Antonella Saisi,et al.  A classification of structures and masonries for the adequate choice of repair. , 2009 .

[16]  Jan Elsen,et al.  Microscopy of historic mortars—a review , 2006 .