Simulation model for complex refrigeration systems based on two-phase fluid network – Part I: Model development

Abstract Some complex refrigeration and heat pump systems with several condensers and evaporators have been developed for different kinds of application. Traditional simulation models were developed for systems in certain operating modes and they failed in modeling the complex refrigeration systems with uncertainties of heat exchangers function and refrigerant flowing direction. In order to predict the performance of complex refrigeration systems, a simulation model is presented based on the two-phase fluid network. The model is consisted of distributed-parameter model of heat exchangers and connecting tubes, map-based model of inverter compressor and electronic expansion valve (EEV). Based on the characteristic of refrigeration system and fluid network, the three conservation equations, i.e. energy, momentum and mass equations, are solved iteratively. This model can deal with the uncertainty of refrigerant flow direction by separating the solving process of the components and the fluid network model, and therefore can simulate different kinds of complex refrigeration systems in different operating modes and conditions. The model is validated by the experimental data of an inverter air conditioner in heating/cooling operating modes and it shows the error of the model is mainly determined by the error of submodels of components in calculating heat transfer and pressure loss. The model is applied for performance analysis of three kinds of complex refrigeration systems in the accompanying article [Shi W.X., Shao, S.Q., Li, X.T., Yan, Q.S., 2008. Simulation model for complex heat pump systems based on two-phase fluid network: part II – model applications, International Journal of Refrigeration 31 (3), 500–509.].

[1]  Chi-Chuan Wang,et al.  An experimental study of the airside performance of the superslit fin-and-tube heat exchangers , 2000 .

[2]  Yong Chan Kim,et al.  The effects of improper refrigerant charge on the performance of a heat pump with an electronic expansion valve and capillary tube , 2002 .

[3]  J. Vargas,et al.  Simulation in transient regime of a heat pump with closed-loop and on-off control , 1995 .

[4]  Jie Ma,et al.  A new inverter heat pump operated all year round with domestic hot water , 2004 .

[5]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[6]  Xianting Li,et al.  Simulation model for complex refrigeration systems based on two-phase fluid network – Part II: Model application , 2008 .

[7]  G. K. Nathan,et al.  Numerical and experimental studies of refrigerant circuitry of evaporator coils , 2001 .

[8]  Jean Lebrun,et al.  Testing Methodology For VRF Systems , 2002 .

[9]  Eric B. Ratts,et al.  An experimental analysis of the effect of refrigerant charge level on an automotive refrigeration system , 2000 .

[10]  Sadasuke Ito,et al.  Studies of a heat pump using water and air heat sources in parallel , 2000 .

[11]  Young Chul Kim,et al.  Performance analysis on a multi-type inverter air conditioner , 2001 .

[12]  Shuangquan Shao,et al.  Performance representation of variable-speed compressor for inverter air conditioners based on experimental data , 2004 .

[13]  Helge V. Larsen,et al.  Aggregated dynamic simulation model of district heating networks , 2002 .

[14]  Savvas A. Tassou,et al.  VARIABLE-SPEED CAPACITY CONTROL IN REFRIGERATION SYSTEMS , 1996 .

[15]  S. K. Fischer.  The Oak Ridge Heat Pump Design Model: Mark III Version Program Documentation , 1988 .

[16]  Piotr A. Domanski,et al.  Mathematical model of an air-to-air heat pump equipped with a capillary tube , 1984 .

[17]  Chi-Chuan Wang,et al.  Effect of circuit arrangement on the performance of air-cooled condensers , 1999 .

[18]  Xianting Li,et al.  A Universal Simulation Model of Air-Cooled Condenser Consisting of Plate-Fin-Tube , 2003 .

[19]  Ricardo Nicolau Nassar Koury,et al.  Numerical simulation of a variable speed refrigeration system , 2001 .

[20]  Yong Chan Kim,et al.  Capacity modulation of an inverter-driven multi-air conditioner using electronic expansion valves , 2003 .

[21]  Siaw Kiang Chou,et al.  HEAT PUMP DRYING: RECENT DEVELOPMENTS AND FUTURE TRENDS , 2002 .

[22]  W. Rohsenow,et al.  Handbook of Heat Transfer Fundamentals , 1985 .

[23]  Tin-Tai Chow,et al.  Domestic air-conditioner and integrated water heater for subtropical climate , 2003 .